CLIMASET SDT Series Bedienungsanleitung

SDTseries

ss/ss – ir

To be used with:

Vertical room fan coils

- Simultaneous indication of

room & desired temperature

- Animated screen

- Bilingual

CLIMASET®

Interactive Controllers

Climaset is under continuous development. There is no warranty about accuracy and reliability of the contents

of this document. Both the described products and document contents may be changed or withdrawn without

any previous notice. There is no responsibility for any damages or loss, even indirectly, howsoever caused.

User’s Guide

CLIMASET

Contents .

1. Your Climaset........................................................................................................................................... 4

2. Wall mounted unit .................................................................................................................................... 4

2.1. Keys and infrared sensor ................................................................................................................... 4

2.2. Screen elements ................................................................................................................................ 5

2.3. Using the menu................................................................................................................................. 5

2.4. Menu functions ................................................................................................................................. 6

2.5. Back light .......................................................................................................................................... 6

3. Remote controller unit (SDT ss-ir only) ..................................................................................................... 7

3.1. Installing batteries for remote controller............................................................................................ 7

3.2. Keys.................................................................................................................................................. 8

3.3. Screen elements ................................................................................................................................ 8

3.4. List of status bar messages ............................................................................................................... 9

4. Installation guide...................................................................................................................................... 9

4.1. Mounting the wall mounted unit ........................................................................................................ 9

4.2. Proper wiring technique for the wall mounted unit ........................................................................... 10

4.3. Engaging the wall mounted unit ...................................................................................................... 10

4.4. Wall mounted unit connectors ......................................................................................................... 10

4.5. Wiring diagram................................................................................................................................ 11

5. Care and maintenance ............................................................................................................................ 11

6. Specifications ......................................................................................................................................... 12

CLIMASET

1. Your Climaset .

Climaset SDT ss / ss-ir series are designed to work in conjunction with vertical room fan coils to maintain the

room air condition at the comfort level and consist of the following units:

nWall mounted unit

oRemote controller (Optional SDT ss-ir only)

2. Wall mounted unit .

The wall mounted unit has the following functions:

1. Measurement of room temperature.

2. Interaction with user to adjust the set points.

3. Interaction with the remote controller (SDT ss-ir only).

4. Interaction with fan coil unit to turn the fan on/off according to the temperature difference or user

command.

2.1. Keys and infrared sensor

n"Up" and o"Down"

Use these keys to scroll the menus.

p"Right" and q"Left"

Use these keys to adjust the values in each menu item.

r"Power"

On/Off switch.

s"Infrared sensor" (SDT ss-ir only)

Intended to receive the remote controller commands.

CLIMASET

2.2. Screen elements

nRoom temperature: Indicates the current room temperature.

oDesired temperature: Your desired room temperature.

pPower status:

Air conditioner apparatus is on.

Air conditioner apparatus is off.

qSeason setting:

The device is adjusted to work in summer.

The device is adjusted to work in winter.

rFan status: If the icon rotates, it indicates that, in case the fan coil selector key is not positioned to off the

fan is working with the speed adjusted with the selector key of the fan coil. If it is still, it indicates the fan is

switched off.

sAnimated icon: It reacts based on temperature difference between the "Desired" and the "Room".

The left icon appears when the room temperature is above the comfort range. Comfort range is up to 1°c

above the "Desired" in summer or up to 1°c below the "Desired" in winter.

The middle icon indicates that the room temperature is in the comfort range.

The right icon shows the room temperature is below the comfort.

tStatus bar: Indicates the” Menu item" which you wish to adjust. Use” Up" or "Down" keys to surf through

these menus (Refer to section 2.1 for "Up" and” Down" keys).

2.3. Using the menu

2.3.1. Accessing a menu function

Scroll with the "Up" or "Down" keys to access the desired menu function. Use "Right" or "Left" keys to adjust

the set points (Refer to Section 2.1 for "Up", "Down", "Right" and "Left" keys)(Refer to section 2.4 on adjusting

set points and their functions).

2.3.2. List of menu functions

1. Desired temperature

2. Season settings

3. English / Local

CLIMASET

2.4. Menu functions

2.4.1. Desired temperature (Menu item 1)

It is the temperature which you like to maintain your room. The standard set point for comfort condition in

the residential zones is 24°c, but you can set a higher or lower temperature if you wish.

The minimum allowable temperature is 16°c and the maximum is 31°c. You can use "Right" key to increase

the value or "Left" key to decrease it (Refer to section 2.1 for "Right" and "Left" keys). As you change the value

the result appears on the desired temperature section of the screen (Refer to section 2.2 to find the "Desired

temperature" on the screen).

Note: If you set a value much lower than 24°c in summer or much higher in winter, it may cause your air

conditioning device to work continuously. The set point which may cause the device to work continuously

depends on outside temperature, air conditioning device heating and cooling capacity, and some other

factors related to your building.

Note: If you set a value much higher than 24°c in summer or much lower in winter, it may cause your air

conditioning device not to start working. For a brief on the conditions which cause such a behavior refer to

the previous note.

2.4.2. Season settings (Menu item 2)

Set the current season for the controller to work properly.

Setting the "summer" in this field causes the controller to switch the air conditioner on if the room

temperature is higher than desired.

In "winter" mode, the air conditioner switches on if the room temperature is lower than the desired.

Use "Right" or "Left" key to adjust the current season. The result appears at "Season setting" section of the

screen (Refer to section 2.2 to find "Season setting" section of the screen and section 2.1 for "Right" and

"Left" keys).

Notice: Not setting this field correctly may cause your air conditioner not to start working.

2.4.3. English / Local (Menu item 3)

It indicates language of the items of the status bar. If "English" is selected, all menu functions will appear in

English. If local is selected, all menu functions of the status bar will appear in your local language.

2.5. Back light

Pressing any keys on the wall mounted unit turns on the back light for several seconds. It enhances reading

during the night.

CLIMASET

3. Remote controller unit (SDT ss-ir only) .

The remote controller utilizes infrared light waves to send the commands to the wall mounted unit. The light

waves are effective at the maximum distance of 16 meters. The viewing angle for the remote controller is 30

degree. It means the wall mounted unit can still sense the commands even if remote controller deflects up to

30 degree from the wall mounted unit infrared sensor.

Note: All remote controllers use the same code, so you may use a single remote control with several wall

mounted units.

Notice: Blocking the infrared lamp on the top of remote controller significantly reduces the range.

3.1. Installing batteries for remote controller

Locate the small latch on the battery compartment cover and push gently the latch in the direction of the

arrow as illustrated below.

The cover releases. Lift off the cover to reveal the inner battery compartment.

Install two new AAA-size 1.5-volt alkaline, lithium or NiCad batteries with correct polarity following the

illustration inside the battery compartment.

Warning: Mixing different battery types may cause explosion. Install same battery types each time you change

them.

Replace the battery cover by inserting the prong into the slot at the bottom of the battery compartment and

then pushing the cover until the latch snaps closed.

CLIMASET

Press the "Wake up" key (Refer to section 3.2 for the "Wake up" key). The "Stand by" screen appears and the

remote controller is functional (Refer to section 3.3.1 for "Stand by" screen).

Notice: Do not place objects on top of the remote control after installation of the batteries. Pressing the keys

for an extended period of time reduces the battery life.

3.2. Keys

n"Up":

Use this key to increase the desired temperature.

o"Down":

Use this key to decrease the desired temperature.

p”Right":

Use this key to switch on the "power status" setting.

q”left":

Use this key to switch off the "power status" setting.

r"Send":

Use this key to transmit settings to the "Wall mounted" unit. After it recognizes

the commands, it responses by a beep sound. If the beep sound is not heard,

you should repeat the transmission by pressing the "Send" key again.

Notice: If the beep sound is not heard after several attempts, it may be one of

the following cases:

•You may too much far from the "Wall mounted" unit. Step toward the

"Wall mounted" unit and try again.

•The deflection between remote controller and the "Wall mounted" unit is

above the maximum allowable. Point the remote controller toward the

"Wall mounted" unit.

•Batteries should be replaced with new ones.

•If none of the above is the case, please contact your dealer for customer service.

s"Wake up": Activates the remote controller. The remote controller is equipped with auto power off feature in

order to minimize power consumption. If you do not push any key for 3 minutes, it goes to "Sleep” mode.

3.3. Screen elements

3.3.1. Stand by screen

nDesired temperature: Your desired room temperature.

oPower status:

Air conditioner apparatus is on.

Air conditioner apparatus is off.

pFan status: If the icon rotates, it indicates that, in case the fan coil selector key is not positioned to off, the

fan is working with the speed adjusted with the selector key of the fan coil. If it is still, it indicates the fan is

switched off.

qStatus bar: It indicates messages about the last key you just pressed for several seconds.

CLIMASET

3.3.2. Good bye screen

If the remote controller is not used for about 3 minutes, it goes to the "sleep mode". Before it sleeps,” Good

bye screen" will appear for some seconds.

3.4. List of status bar messages

n"Ready": Remote controller is ready for adjustments.

o"Temp. raised": By pressing "Up" key you have increased the "Desired" temperature.

p"Temp. dropped": By pressing "Down" key you have decreased the "Desired" temperature.

q"Power turned on": Power status is switched on by pressing the "Right" key.

r"Power turned off": Power status is switched off by pressing the "Left" key.

s"Not allowed": The message appears if you try to set the desired temperature above 31°c or below 16°c or

by pressing "Right" key when the power status is on or "Left" key when the power status is off.

4. Installation guide .

4.1. Mounting the wall mounted unit

Position the mounting plate on the wall. Level the mounting plate. Use a pencil to mark the mounting holes.

Remove the plate from the wall and drill 3/16" holes in wall. Tap anchors into drilled holes. Reposition the

plate and loosely insert two mounting screws into the holes. Level the plate for appearance. Tighten

mounting screws.

CLIMASET

4.2. Proper wiring technique for the wall mounted unit

Please refer to the sketch below for the proper wiring technique. Also refer to section 4.5 for arrangement of

the wires.

4.3. Engaging the wall mounted unit

Engage tabs at the top of the units and the wall plate. Gently press lower edge of the case to latch.

To remove the "Wall mounted unit" from the wall, the top should be pulled out first.

4.4. Wall mounted unit connectors

Connector

Unit Description Input /

Output

Electrical

Characteristics

Phase

Null

Fan phase wire

Input

Output

AC220V/50Hz

Null

AC220V/50Hz

Andere Handbücher für SDT Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CLIMASET Temperaturregler Handbücher

CLIMASET

CLIMASET SDT Series Bedienungsanleitung

Beliebte Temperaturregler Handbücher anderer Marken

Swegon

Swegon LUNAd MB Bedienungsanleitung

Lucky Reptile

Lucky Reptile Thermo Control II Bedienungsanleitung

SENSORMETRIX

SENSORMETRIX Argon 100 Bedienungsanleitung

Fuji Electric

Fuji Electric PXE4 Bedienungsanleitung

Yuyao gongyi

Yuyao gongyi XMT-808 series Bedienungsanleitung

Selec

Selec TC544C Bedienungsanleitung

P.W. KEY

P.W. KEY rt-208gt Bedienungsanleitung

Future Design

Future Design FDC-9200 Bedienungsanleitung

BH Thermal

BH Thermal BriskONE Bedienungsanleitung

Omron

Omron E5EX-H Bedienungsanleitung

West Control Solutions

West Control Solutions KS 45 Kurzanleitung

MCS

MCS RITC-15B Bedienungsanleitung

SMC Networks

SMC Networks Thermo-con INR-244-639 Bedienungsanleitung

eltherm

eltherm Ex-TC It Series Bedienungsanleitung

Omron

Omron C200H-TV Series Bedienungsanleitung

industrie technik

industrie technik CA1 Bedienungsanleitung

KRAL

KRAL EET 32 Bedienungsanleitung

dixell

dixell XR420C Verdrahtungsschema