CLIMASTAR SMART TOUCH 500 Leitfaden
INSTALLATION MANUAL AND USER GUIDE
SMART TOUCH RANGES
2
3
INDEX
1- WARNING........................................................................................................4
2- INSTALLATION INSTRUCTIONS.................................................................7
3- USING THE INERTIA RADIATOR, SMART TOUCH RANGES................8
3.1 STARTING THE DEVICE...........................................................................8
3.2 SETTING DATE AND TIME ......................................................................8
3.3 MANUAL MODE.........................................................................................8
3.4 AUTOMATIC MODE ..................................................................................9
3.5 PILOT WIRING MODE.............................................................................10
3.6 COPY FUNCTION.....................................................................................10
3.7 KEY BLOCK FUCTION............................................................................11
3.8 SOUND FUNCTION..................................................................................11
3.9 OTHER INFORMATION...........................................................................11
5- CLEANING AND MAINTENANCE.............................................................12
6- TECHNICAL SPECIFICATIONS..................................................................13
7- TROUBLESHOUTING...................................................................................14
8- GUARANTEE TERMS...................................................................................15
4
1- WARNING
The warranty of the heater will not cover any damage
caused by non observance of any of these instructions.
This guide must be kept and given to any new owner.
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction
concerning use of the appliance in a safe way and
understand the hazards involved. Children must not play
with the appliance. Cleaning and user maintenance must
not be made by children without supervision.
Children aged from 3 years and less than 8 years shall
only switch on/off the appliance provided that it has been
placed or installed in its intended normal operating
position and they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children aged from
3 years and less than 8 years shall not plug in, regulate
and clean the appliance or perform user maintenance.
Children of less than 3 years should be kept away unless
continuously supervised.
CAUTION: Some parts of this product can become
very hot and cause burns. Particular attention has to
5
be given where children and vulnerable people are
present.
Should the heater be moved and reinstalled, it is essential
that the work is carried out by a competent electrician.
The use of these heaters is forbidden in any area where
there is a presence of gases, explosives or inflammable
objects.
Neither the connecting cable nor any other object must come
into contact with the hot unit.
Check that the voltage shown on the rating plate on the
heater is the same as the voltage of the supply to which
connection is to be made.
WARNING: In order to avoid overheating, do not cover
the heater. Do not use this heater to dry clothes.
The air outlet at the top of the thermal radiator and the air
inlet at the bottom are provided to ensure the most efficient
operation of the appliance. They also protect the heater from
overheating; therefore, it is essential that at no time are
they covered.
This heater should be switched off at the isolating switch
before any repair work is carried out. This action should
also be taken during the times of the year when heat is not
required.
The radiator should not be installed just below an electrical
socket or in front of a socket outlet.
6
The appliance must be installed in such a way that switches
and other control devices cannot be touched by a person
using a bath or shower.
The installation must be carried out in accordance with the
current electrical regulations.
The heater is fitted with a flexible cable size 3 x 1.00 mm2
for electrical connection. It may be used to connect the
heater to the fixed wiring of the premised through a suitable
connection box positioned adjacent to the heater.
The supply circuit to the heater must incorporate a double
pole isolating switch having a contact separation of at least
3 mm.
If the flexible supply cord is damaged, it must be replaced
by a repair workshop recognised by the manufacturer, in
order to avoid hazard.
All models are supplied with an electrical interrupt cut-out.
This will switch off the heater if, for any reason, it
overheats. Should the cut-out operate, turn the heater off
and remove the cause for the overheating. The cut-out will
be reset automatically.
The presence in the air of particles of smoke, dust and other
pollutants could, in time, discolour the walls and surfaces
around the heater.
7
2- INSTALLATION INSTRUCTIONS
- Open the package and check that it is the
correct model and it is in good condition.
- To obtain optimum performances it is
necessary to maintain a minimum clearance
of 15 cm between the radiator and any
inflammable material as furniture, curtains
etc.
- Recommended clearances required to
maintain are indicated on the following
figure:
- Once decided the location to install the device, remove the packaging and
extract the device and its mounting kit
- Fix the radiator to the wall using the box as a pattern as indicated below:
Check measures and levelling before drilling. Measurements in mm
150
100
500
8
3- USING THE INERTIA RADIATOR, SMART TOUCH
RANGES
3.1 STARTING THE DEVICE
First, plug in the power cord to a mains power outlet, and click the switch on the right. The
display starts, shows a welcome message, and shows OFF. To start the device, press the
“POWER” button; set temperature appears on the screen.
3.2 SETTING DATE AND TIME
A. Press OK for a few seconds.
B. The display shows CONFIG TIME. If not, press until you see and press OK.
C. Set the hour (H) using; to validate press OK.
D. Set the minutes (M) using; to validate press OK.
E. Press to select the day of the week (DAY 1 Monday, DAY 2 Tuesday); to validate press
OK.
Date and time are now set. Press ESC and select the comfort temperature pressing the
arrows. Your device is now working!
3.3 MANUAL MODE
In this mode, the device works as per factory set. All you have to do is press to select
the desired temperature.
The set temperature can be modified from 15º C to 28º C in intervals of 0.5.
1. “POWER /ESC” button: Turn on
and off the device / allows moving back
from any menu.
2. MODE/OK” button: to access main
menu and select or confirm the desired
option.
3. “UP/DOWN” arrows: allow to set
the values and navigate through the
different options of the menus.
4. DISPLAY: shows the different
options and desired values.
5. RED DOT: if flashing, the device is
working in PILOT WIRING mode, if
not, then it is working in automatic as
per the set programming.
9
How to select the manual mode?
-Press OK
-Press and select MAN; press OK to confirm.
-Press and confirm the desired temperature.
Press POWER BUTTON to switch off the unit, the display shows OFF.
If the device is OFF, the FROST setting automatically activates to prevent temperature being
below 7ºC.
3.4 AUTOMATIC MODE
In this mode the device works time schedule. It can work as per factory set (see table below)
or according to the user’s configuration.
TIME MONDAY TUESDAY WEDNESDAY
THURSDAY
FRIDAY SATURDAY SUNDAY
00 H ECO ECO ECO ECO ECO ECO ECO
01 H ECO ECO ECO ECO ECO ECO ECO
02 H ECO ECO ECO ECO ECO ECO ECO
03 H ECO ECO ECO ECO ECO ECO ECO
04 H ECO ECO ECO ECO ECO ECO ECO
05 H ECO ECO ECO ECO ECO ECO ECO
06 H ON ON ON ON ON ECO ECO
07 H ON ON ON ON ON ON ON
08 H ECO ECO ECO ECO ECO ON ON
09 H ECO ECO ECO ECO ECO ON ON
10 H ECO ECO ECO ECO ECO ON ON
11 H ON ON ON ON ON ON ON
12 H ON ON ON ON ON ON ON
13 H ECO ECO ECO ECO ECO ON ON
14 H ECO ECO ECO ECO ECO ON ON
15 H ECO ECO ECO ECO ECO ON ON
16 H ECO ECO ECO ECO ECO ON ON
17 H ON ON ON ON ON ON ON
18 H ON ON ON ON ON ON ON
19 H ON ON ON ON ON ON ON
20 H ON ON ON ON ON ON ON
21 H ON ON ON ON ON ON ON
22 H ECO ECO ECO ECO ECO ECO ECO
23 H ECO ECO ECO ECO ECO ECO ECO
Before setting the device, take into account the following:
-OFF, the device is programmed to switch off.
-ECO, economy temperature, 3ºC below set temperature.
-ON, comfort temperature. Temperature selected by the user as room temperature. It can
be modified in the manual or automatic mode when shown on the display.
10
How to select custom programming?
-Press OK
-Press key , select AUTO; press OK to validate.
-The display will show the set temperature together with a red dot that indicates the
unit is working in automatic mode.
If AUTOMATIC mode is selected the heater cannot be turned off. To turn off the device,
enter mode (MODE/OK), select MAN using and press OK. Now you can turn off the
device using
How to carry out a custom programming?
If you need to programme several days on identical conditions, programme one day
and copy the remaining ones. See Function COPY DAY (section 2.7)
A.- Press OK for a few seconds.
B.- Press , select SELECT DAY and press OK to validate.
C.- Press , select the day to set and press OK to validate.
D.- We start at 00.00 h., use to select the desired temperature (ON -set temperature-;
ECO -3ºC below set temperature-; OFF switch off). Press Ok to validate.
E.- Go on programming the remaining hours until 23.00 h; at this stage the display shows
the day to programme.
If we want to set the remaining days, turn to B; if not press
3.5 PILOT WIRING MODE
In this mode the device works following instructions of an external unit.
How to select FP mode?
A.- Press OK
B.- Press key , select FP; press OK to validate.
C.- The display will show the set temperature together with a red dot that indicates the
unit is working in FP mode.
If FP mode is selected the heater cannot be turned off. To turn off the device, enter mode
(MODE), select MAN using and press OK. Now you can turn off the device using
3.6 COPY FUNCTION
This function enables you to copy existing time programmes. To copy the setting of one
day into another, do as follows:
A.- Press OK for a few seconds.
B.- Press , select COPY DAY and press OK to validate.
C.- Press , select the day to set and press OK to validate.
D.- Press , select the day to copy; press OK to validate.
If we want to go on copying into other days, turn to B. If not, press
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere CLIMASTAR Heizung Handbücher
CLIMASTAR
CLIMASTAR 3IN1 PRO Series Bedienungsanleitung
CLIMASTAR
CLIMASTAR SILICIUM ONE Bedienungsanleitung
CLIMASTAR
CLIMASTAR STEEL 800 W Bedienungsanleitung
CLIMASTAR
CLIMASTAR OPTIMUS Bedienungsanleitung
CLIMASTAR
CLIMASTAR SILICIUM WIFI Bedienungsanleitung
CLIMASTAR
CLIMASTAR DK ONE - WIFI Bedienungsanleitung
CLIMASTAR
CLIMASTAR SILICIUM SMART PRO Bedienungsanleitung
CLIMASTAR
CLIMASTAR SILICIUM SLIM Series Bedienungsanleitung
CLIMASTAR
CLIMASTAR SILICIUM ETNA Bedienungsanleitung
CLIMASTAR
CLIMASTAR ETNA Bedienungsanleitung
CLIMASTAR
CLIMASTAR SILICIUM HYBRID ECO Bedienungsanleitung
CLIMASTAR
CLIMASTAR SILICIUM HYBRID INVERTER Bedienungsanleitung
CLIMASTAR
CLIMASTAR Smart EASY TECH Bedienungsanleitung
CLIMASTAR
CLIMASTAR SILICIUM 3 IN 1 Bedienungsanleitung
CLIMASTAR
CLIMASTAR STYLE 500W Bedienungsanleitung
CLIMASTAR
CLIMASTAR CURVE WIFI Bedienungsanleitung
CLIMASTAR
CLIMASTAR SILICIUM HYBRID INVERTER Bedienungsanleitung
CLIMASTAR
CLIMASTAR SILICIUM SLIM WIRELESS Bedienungsanleitung
CLIMASTAR
CLIMASTAR SILICIUM TOUCH Bedienungsanleitung
Beliebte Heizung Handbücher anderer Marken
Empire Heating Systems
Empire Heating Systems WCC65 Bedienungsanleitung
Wetekom
Wetekom 92 86 43 Bedienungsanleitung
Desa
Desa SPC170-F Bedienungsanleitung
Watlow
Watlow Watrod Electric Tubular Heaters Bedienungsanleitung
Haverland
Haverland ECO-DRY GPS Series Stücklistenhandbuch
Stelpro
Stelpro ASILVC2060 Series Bedienungsanleitung