Cloudworks CDS543 Bedienungsanleitung

USER

MANUAL :

DOCUMENT

NAME

CDS543

Nimbus

Document Number:

Client:

Date:

Issue:

Status:

Classification:

S/W File Name

This document contains information relating to the rights of

agreement provisions are applicable to this document. When no longer needed for authorised

purposes, this document must be destroyed or returned to

Cape Digital Solutions

reserves the right to change the desi

without prior notice.

The contents of this manual is the property

without prior permission, in writing, from

MANUAL :

CDS543 NIMBUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

Nimbus

Pulse Logger User Manual

CDS543 Nimbus Pulse Logger User Manual

User

1 December 2020

V1.0

Draft

Confidential

CDS543 Nimbus Pulse Logger User Manual.docx

This document contains information relating to the rights of

Cape Digital Solutions

. The confidentiality

agreement provisions are applicable to this document. When no longer needed for authorised

purposes, this document must be destroyed or returned to

Cape Digital Solutions.

reserves the right to change the desi

gn or specifications of their products

The contents of this manual is the property

of Cape Digital Solutions

and may not be copied or modified

without prior permission, in writing, from

Cape Digital Solutions, Cape Town, South Africa.

PAGE

. The confidentiality

agreement provisions are applicable to this document. When no longer needed for authorised

gn or specifications of their products

and may not be copied or modified

USER

MANUAL :

DOCUMENT

NAME

Issue Date

V01 1 9 January 2021

MANUAL :

CDS543 NIMBUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

AMENDMENT HISTORY

Amendment Details

Amended By

Compile document

Alex Romanov

PAGE

Amended By

Alex Romanov

USER

MANUAL :

DOCUMENT

NAME

Table of Contents

CDS543 Nimbus Pulse Logger

1.1

Introduction ................................

................................

1.2

Features ................................

................................

1.3

Specifications

................................

1.4

Architecture ................................

................................

1.5

Power Modes

................................

1.6

LED and button functions

................................

1.6.1

LED functions

................................

1.6.2

Pushbutton Functions

................................

1.7

Connections

................................

1.8

External Power Supply / Solar System Connection

1.9

Using the pulse inputs

................................

1.10

Using the ECO interface

................................

1.11

Sim card and battery installation

................................

1.12

Installation considerations

................................

Logger Setup

................................

2.1

Setup via Bluetooth Configure

................................

2.2

CDS543 Nimbus Pulse Logger Setup via Remote Configure

2.3

CDS543 Nimbus Pulse Logger Setup via Offline Script Configure

MANUAL :

CDS543 NIMBUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

CDS543 Nimbus Pulse Logger

................................

...........................

................................

...............................

................................

................................................................

.......................

................................

..........................

................................

................................................................

.......................

................................

................................................................

...............

................................

................................................................

.........................

External Power Supply / Solar System Connection

................................

.............................

................................

................................................................

..........

................................

................................................................

.....

................................

........................

................................

..............................

................................

...........................

CDS543 Nimbus Pulse Logger Setup via Remote Configure

................................

............

CDS543 Nimbus Pulse Logger Setup via Offline Script Configure

................................

PAGE

................................

.... 4

...........................

...............................

.......................

..........................

.......................

................................

..... 7

...............

................................

... 7

.........................

.............................

..........

.....

........................

................................

.. 12

..............................

...........................

............

................................

.... 26

USER

MANUAL :

DOCUMENT

NAME

1 CDS543 NIMBUS PULSE

LOGGER

1.1 Introduction

The Nimbus Pulse

logger is a robust, sophisticated

it ideal for a large number of

measurement applications

Communication to your own server

and database can be achieved

on these servers is supplied free of charge.

setup without the need for a complicated se

supplied free of charge to allow clients to manage their own networks and data. There are no monthly charges for

collecting and hosting data as the client can provide this service themselves

1.2 Features

 Uses NB-

IoT technology. NarrowBand

(LPWA) technology developed to enable a wide range of new IoT devices and services. NB

improves the power consumption of user devices, system capacity and spectrum efficiency, especial

coverage.

 Bluetooth interface -

setup and manual data collection can be achieved through the Bluetooth interface negating

the need for cables that invariable fail during continuous use.

 Optional external power operation

 Uses standard off-the-shelf alkali

ne batteries. This logger uses 2

excess of 5 years under normal usage. Many other loggers use

obtain. Other problems involving l

ithium batteries are the restrictions when shipping using airfreight. All

batteries need to be shipped as hazardous cargo that is becoming increasingly difficult to achieve as many airlines

are no longer allowing these batteries on the

 2 x Pulse input ports -

Pulse inputs are used on metering devices that supply a pulse output for a measured

amount of product.

MANUAL :

CDS543 NIMBUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

LOGGER

logger is a robust, sophisticated

NB-IoT

logger/controller with a wide range of input capabilities, making

measurement applications

and database can be achieved

via

the internet or a private APN.

on these servers is supplied free of charge.

The Nimbus Pulse

Logger has been designed to allow for easy installation and

setup without the need for a complicated se

rver infrastructure. Setup and m

anagement software (CloudWorks) is

supplied free of charge to allow clients to manage their own networks and data. There are no monthly charges for

collecting and hosting data as the client can provide this service themselves

IoT technology. NarrowBand

-Internet of Things (NB-IoT) is a standards-

based low power wide area

(LPWA) technology developed to enable a wide range of new IoT devices and services. NB

improves the power consumption of user devices, system capacity and spectrum efficiency, especial

setup and manual data collection can be achieved through the Bluetooth interface negating

the need for cables that invariable fail during continuous use.

with battery failover.

ne batteries. This logger uses 2

x standard D Cell alkaline batteries that

excess of 5 years under normal usage. Many other loggers use

ithium batteries that are expensive and difficult to

ithium batteries are the restrictions when shipping using airfreight. All

batteries need to be shipped as hazardous cargo that is becoming increasingly difficult to achieve as many airlines

are no longer allowing these batteries on the

ir aircraft.

Pulse inputs are used on metering devices that supply a pulse output for a measured

PAGE

logger/controller with a wide range of input capabilities, making

the internet or a private APN.

The software running

Logger has been designed to allow for easy installation and

anagement software (CloudWorks) is

also

supplied free of charge to allow clients to manage their own networks and data. There are no monthly charges for

based low power wide area

(LPWA) technology developed to enable a wide range of new IoT devices and services. NB

-IoT significantly

improves the power consumption of user devices, system capacity and spectrum efficiency, especial

ly in deep

setup and manual data collection can be achieved through the Bluetooth interface negating

x standard D Cell alkaline batteries that

can last in

ithium batteries that are expensive and difficult to

ithium batteries are the restrictions when shipping using airfreight. All

lithium

batteries need to be shipped as hazardous cargo that is becoming increasingly difficult to achieve as many airlines

Pulse inputs are used on metering devices that supply a pulse output for a measured

USER

MANUAL :

DOCUMENT

NAME



ECO interface for connecting to GWF meters.

 Large onboard non-

volatile memory

dependent).



Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and

transmitted at programmable inter

vals.



Remote programming of all setup parameters via



Ideal for leak detection, alarming to prevent water loss.



Onboard Bluetooth can stream diagnostic information about signal strength,

 Touch sensitive button

and LED's for manual wakeup to server and diagnostic purposes etc.

1.3 Specifications

 NB-

IoT LTE Cat NB1 communications



Supports B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66

 Bluetooth interface



 Option of

external power with battery failover and sleep



All management software supplied free

 Standard Alkaline Batteries - 2

x D cells (5+ years)

 2 x Pulse inputs



ECO interface for connecting to GWF electronic meters

 Up to 14400

record datalog memory (application



Logging intervals 1 minute to 1 month

 Rugged housing with seal eye



Touch sensitive button and LED Diagnostics



Configuration and diagnostics through Bluetooth interface

 Fully configurable remotely

 Stream data in real-

time when powered by external



Size 185mm x 130mm x 55mm (including cable glands)

 Housing Protection Class : IP68 -

Max 1.2m, 30 days

 Environment : -

20°C to 80°C humidity = 90% non condensing. Check battery specifications for low power systems

 Uses a Micro SIM card

MANUAL :

CDS543 NIMBUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

ECO interface for connecting to GWF meters.

volatile memory

- This logger can record in excess of 14400 datalog

records

Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and

vals.

Remote programming of all setup parameters via

NB-IoT link.

Ideal for leak detection, alarming to prevent water loss.

Onboard Bluetooth can stream diagnostic information about signal strength,

etwork status etc.

and LED's for manual wakeup to server and diagnostic purposes etc.

IoT LTE Cat NB1 communications

Supports B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66

external power with battery failover and sleep

All management software supplied free

x D cells (5+ years)

ECO interface for connecting to GWF electronic meters

record datalog memory (application

dependent)

Logging intervals 1 minute to 1 month

Touch sensitive button and LED Diagnostics

Configuration and diagnostics through Bluetooth interface

time when powered by external

supply

Size 185mm x 130mm x 55mm (including cable glands)

Max 1.2m, 30 days

20°C to 80°C humidity = 90% non condensing. Check battery specifications for low power systems

PAGE

records

(application

Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and

etwork status etc.

and LED's for manual wakeup to server and diagnostic purposes etc.

20°C to 80°C humidity = 90% non condensing. Check battery specifications for low power systems

USER

MANUAL :

DOCUMENT

NAME

1.4 Architecture

1.5 Power Modes

The Nimbus Pulse

Logger can operate in one of

 Mains powered -

in this mode the logger can be continuously connected to the server allowing for the streaming

of live data.

 Battery powered - The Nimbus

Pulse

depending on the operation

. In this mode, the logger will 'wakeup' (

recorded data to a remote da

tabase.

 External 12V (8-15V) 2A supply -

in this mode the logger can be continuously connected to the server allowing for

the streaming of live data. B

atteries

the power fail.

Bluetooth

Interface

Central

Processor

3G GSM

Interface

Non volatile

memory

3 x

Batteries

External 12V

Power Supply

Power

Management

MANUAL :

CDS543 NIMBUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

Logger can operate in one of

two power configurations.

in this mode the logger can be continuously connected to the server allowing for the streaming

Pulse

logger uses standard 'D' Cell alkal

ine batteries that will last several years

. In this mode, the logger will 'wakeup' (

adjustable -

normally 6 hourly) and upload its

tabase.

in this mode the logger can be continuously connected to the server allowing for

atteries

can be fitted and the logger will automatically switch to battery mode should

Bluetooth

Interface

Central

Processor

Input

Interface

3 x

Alkaline

Batteries

Power

Management

ECO Interface

2 x Pulse

Inputs

PAGE

in this mode the logger can be continuously connected to the server allowing for the streaming

ine batteries that will last several years

normally 6 hourly) and upload its

in this mode the logger can be continuously connected to the server allowing for

can be fitted and the logger will automatically switch to battery mode should

ECO Interface

2 x Pulse

Inputs

USER

MANUAL :

DOCUMENT

NAME

1.6 LED and button functions

On the front of the logger, there are 2 LED

's and a touch sensitive 'SELECT' button.

is the Bluetooth reset button.

1.6.1

LED functions

Blue LED - Bluetooth status

 Flashing indicates the B

luetooth is ready to receive an



Solid light indicates and active connection

Red LED - Logger status

 Solid -

Logger is in Command Mode (normally accompanied by an active Bluetooth connection)

 Fast flash -

Logger is currently initiating a connection to the server

 Slow Flash -

Connection has been established to the server

1.6.2

Pushbutton Functions

SELECT touch button - P

lease note, this button is touch sensitive in order to maintain the waterproof

 Single short push will toggle

the Bluetooth radio on and off.



A push of more than 3 seconds will result in the logger establishing a connection

datalog.

BLUETOOTH RESET button -

This button is used to reset the Bluetooth interface in the event of a lost password or generally

configuration loss.

The Bluetooth interface of this logger can be configured to have a access password which will limit external ac

those issued the password. Should this password get lost, the logger can be opened and the Bluetooth interface reset to

disable the security. It is advisable to then connect to the logger again and setup a new password. This is explained later

this document.

MANUAL :

CDS543 NIMBUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

's and a touch sensitive 'SELECT' button.

Internally on the reverse side of the lid

luetooth is ready to receive an

incoming connection

Solid light indicates and active connection

Logger is in Command Mode (normally accompanied by an active Bluetooth connection)

Logger is currently initiating a connection to the server

Connection has been established to the server

lease note, this button is touch sensitive in order to maintain the waterproof

the Bluetooth radio on and off.

A push of more than 3 seconds will result in the logger establishing a connection

to the server

This button is used to reset the Bluetooth interface in the event of a lost password or generally

The Bluetooth interface of this logger can be configured to have a access password which will limit external ac

those issued the password. Should this password get lost, the logger can be opened and the Bluetooth interface reset to

disable the security. It is advisable to then connect to the logger again and setup a new password. This is explained later

PAGE

Internally on the reverse side of the lid

Logger is in Command Mode (normally accompanied by an active Bluetooth connection)

lease note, this button is touch sensitive in order to maintain the waterproof

status of the housing.

to the server

and uploading its

This button is used to reset the Bluetooth interface in the event of a lost password or generally

The Bluetooth interface of this logger can be configured to have a access password which will limit external ac

cess to only

those issued the password. Should this password get lost, the logger can be opened and the Bluetooth interface reset to

disable the security. It is advisable to then connect to the logger again and setup a new password. This is explained later

USER

MANUAL :

DOCUMENT

NAME

In order to reset the Bluetooth interface,

with the housing open,

 Remove all power from the logger



Press and hold the Bluetooth reset bu



Power up the logger again while holding the button.

pressed.



Once the Red Status LED comes on again, the button can be released.



This will now reset the Bluetooth interface.

1.7 Connections

Connections are available on a series of

10 terminal connectors

These connections are as follows:

1. External Power Supply / Solar system

ground (optional)

2. External 12V Power Supply

/ Solar system

3. 24V 30mA max power generator out

put (used for powering a current loop device)

4. Ground for the 24V generator

5. Isolated negative connection for 4-

20mA isolated loop input

6. Isolated positive connection for 4-

20mA isolated loop input

7. ECO Transmit line

8. ECO Receiveline

9. ECO ground connection

10. System earth -

used for transient voltage suppression

MANUAL :

CDS543 NIMBUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

with the housing open,

please follow the below procedure.

emember to remove the batteries if external power is present.

Press and hold the Bluetooth reset bu

tton.

Power up the logger again while holding the button.

Bluetooth LED will be on confirming the button has been

Once the Red Status LED comes on again, the button can be released.

This will now reset the Bluetooth interface.

10 terminal connectors

ground (optional)

/ Solar system

(optional)

put (used for powering a current loop device)

20mA isolated loop input

used for transient voltage suppression

PAGE

please follow the below procedure.

emember to remove the batteries if external power is present.

Bluetooth LED will be on confirming the button has been

USER

MANUAL :

DOCUMENT

NAME

1.8

External Power Supply / Solar System

The CDS543 Nimbus Pulse

logger can be powered entirely from an external 12V (8

source.

Using a solar power source and also populating the logger with alkaline batteries means that the logger can be put

into dual mode. In this mode, while there is solar power available, the logger will remain online with the server. Should the

solar power fa

il, the logger will automatically switch to 'battery' mode until the solar power source is restored. This is ideal

for remote applications where there is no mains power available and streaming data is required.

1.9 Using the pulse inputs

Onboard the Nimbus Pulse

logger are 2 pulse inputs. Pulse inputs are used by metering type devices (eg water or energy

meter) to measure consumption.

Example configuration of water meter with a volt free switch (e.g. reedswitch)

MANUAL :

CDS543 NIMBUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

External Power Supply / Solar System

Connection

logger can be powered entirely from an external 12V (8

-15V) 2A

power supply or solar p

Using a solar power source and also populating the logger with alkaline batteries means that the logger can be put

into dual mode. In this mode, while there is solar power available, the logger will remain online with the server. Should the

il, the logger will automatically switch to 'battery' mode until the solar power source is restored. This is ideal

for remote applications where there is no mains power available and streaming data is required.

logger are 2 pulse inputs. Pulse inputs are used by metering type devices (eg water or energy

Example configuration of water meter with a volt free switch (e.g. reedswitch)

PAGE

power supply or solar p

ower

Using a solar power source and also populating the logger with alkaline batteries means that the logger can be put

into dual mode. In this mode, while there is solar power available, the logger will remain online with the server. Should the

il, the logger will automatically switch to 'battery' mode until the solar power source is restored. This is ideal

logger are 2 pulse inputs. Pulse inputs are used by metering type devices (eg water or energy

Example configuration of water meter with a volt free switch (e.g. reedswitch)

USER

MANUAL :

DOCUMENT

NAME

Example configuration of water meter with

connection to pin

1.10 Using the ECO interface

The onboard ECO interface is primarily used to support the GWF range of water meters with these interfaces

installed.

The interface provides power to the meter, as well as reading back the data string from the meter.

MANUAL :

CDS543 NIMBUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

Example configuration of water meter with

electronic interface. Please note the polarity of the interface. Ground

connection to pin

4 (or 6 for Input 2).

The onboard ECO interface is primarily used to support the GWF range of water meters with these interfaces

The interface provides power to the meter, as well as reading back the data string from the meter.

PAGE

electronic interface. Please note the polarity of the interface. Ground

The onboard ECO interface is primarily used to support the GWF range of water meters with these interfaces

The interface provides power to the meter, as well as reading back the data string from the meter.

Inhaltsverzeichnis

Andere cloudworks Datenlogger Handbücher

cloudworks

cloudworks Nimbus Loop Logger Bedienungsanleitung

cloudworks

cloudworks CDS552 Bedienungsanleitung

cloudworks

cloudworks CDS541 Bedienungsanleitung

cloudworks

cloudworks CDS547 Bedienungsanleitung

cloudworks

cloudworks CDS545 Bedienungsanleitung

cloudworks

cloudworks CDS551 Bedienungsanleitung

Beliebte Datenlogger Handbücher anderer Marken

TESTO

TESTO 176 Bedienungsanleitung

HT Italia

HT Italia XL421 Bedienungsanleitung

HBM

HBM SOMAT XR CX22B-R Bedienungsanleitung

Agtrix

Agtrix 380i Bedienungsanleitung

Hobo

Hobo H8 Pro Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech PCI2320 Bedienungsanleitung

Athena

Athena GET SL1 Bedienungsanleitung

Motec Systems

Motec Systems C185 Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech USB2832 Bedienungsanleitung

Rotronic

Rotronic HygroLog HL20 Bedienungsanleitung

MRC

MRC DW-6092 Bedienungsanleitung

Racelogic

Racelogic VBOX LapTimer Bedienungsanleitung

Edu-Logger

Edu-Logger 900-240 Bedienungsanleitung

Elma

Elma DT173 Bedienungsanleitung

MadgeTech

MadgeTech PRTemp140 Technisches Datenblatt

Comet

Comet U0121M Bedienungsanleitung

pico Technology

pico Technology PT-104 Bedienungsanleitung

Soil Instruments

Soil Instruments GTecLink Bedienungsanleitung

cloudworks CDS543 Bedienungsanleitung

Beliebte Datenlogger Handbücher anderer Marken