cmotion cPRO hand unit Bedienungsanleitung
All content © 2018, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 1 of 80
v1.1 | November, 2018
Software Release Package v1.1
cPRO hand unit
User Guide
All content © 2018, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 2 of 80
Imprint
Copyright
Copyright © 2018 cmotion GmbH (cmotion).
All rights reserved. No portions of this document may be reproduced without prior written
consent of cmotion GmbH.
Specications are subject to change without notice. Errors, ommissions, and
modications excepted.
For further assistance
cmotion GmbH
Wiedner Hauptstraße 135/B3
1050 Wien
Fbnr.: FN220240H – HG Wien
UID-Nr.: ATU 54026806
http://www.cmotion.eu
+43 1 7891096
This USER GUIDE applies to the following product:
K2.0016602 cPRO hand unit with Software Release Package v1.1
Document revision history: v1.1
Release Date: 15.11.2018
All content © 2018, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 3 of 80
Disclaimer
Before using the products described in this manual, be sure to read and understand all
the respective instructions.
The cmotion Software Release Package v1.1 cPRO hand unit is only available to
commercial customers. By utilization, the customer agrees that the cPRO hand unit or
other components of the system are deployed for commercial use only. Otherwise the
customer must contact cmotion before utilization.
While cmotion endeavors to enhance the quality, reliability and safety of their products,
customers agree and acknowledge that the possibility of defects thereof cannot be
eliminated entirely.
To minimize the risk of damage to property or injury (including death) to persons arising
from defects in the products, customers must incorporate sucient safety measures in
their work with the system and heed the stated canonic use.
cmotion or its subsidiaries do not assume any responsibility for losses incurred due to
improper handling or conguration of the cPRO hand unit or other system components.
cmotion assumes no responsibility for any errors that may appear in this document. The
information is subject to change without notice.
For product specication changes after this manual was published, refer to the
latest published cmotion data sheets or release notes, etc., for the most up-to-date
specications. Not all products and/or types are available in every country. Please check
with your cmotion sales representative for availability and additional information.
Neither cmotion nor its subsidiaries assume any liability for infringement of patents,
copyrights or other intellectual property rights of third parties by or arising from the
use of cmotion products or any other liability arising from the use of such products. No
license, express, implied or otherwise, is granted under any patents, copyrights or other
intellectual property right of cmotion or others.
cmotion or its subsidiaries expressly exclude any liability, warranty, demand or other
obligation for any claim, representation, cause, action, or whatsoever, express or implied,
whether in contract or not, including negligence, or incorporated in terms and conditions,
whether by statue, law or otherwise. In no event shall cmotion or its subsidiaries be
liable for or have a remedy for recovery of any special, direct, indirect, incidental, or
consequential damages, including, but not limited to lost prots, lost savings, lost
revenues or economic loss of any kind or for any claim by a third party, downtime, good-
will, damage to or replacement of equipment or property, any cost or recovery of any
material or goods associated with the assembly or use of our products, or any other
damages or injury of the persons and so on or under any other legal theory.
In the event that one or all of the foregoing clauses are not allowed by applicable law, the
fullest extent permissible clauses by applicable law are validated
All content © 2018, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 4 of 80
Table of Contents
1. For your safety............................................................................................................ 8
2. Audience and intended use...................................................................................... 10
3. Scope of delivery and warranty................................................................................ 10
4. Introduction .............................................................................................................. 11
4.1. LBUS connector................................................................................................. 12
4.2. CAM interface..................................................................................................... 12
5. cPRO hand unit hardware layout.............................................................................. 13
5.1. Hardware layout overview .................................................................................. 13
5.2. Control interface................................................................................................. 14
5.2.1. Knob............................................................................................................ 14
5.2.1.1. Mechanical hard stops .................................................................... 14
5.2.1.2. Panic button .................................................................................... 15
5.2.1.3. Pre-marked focus rings ................................................................... 15
5.2.1.4. Datum line........................................................................................ 15
5.2.1.5. Knob illumination and status LEDs.................................................. 15
5.2.2. Slider ........................................................................................................... 16
5.2.2.1. Pre-marked iris strips....................................................................... 16
5.2.2.2. Slider illumination and status LEDs ................................................. 16
5.2.3. Joystick ....................................................................................................... 17
5.2.3.1. Position indicator display................................................................. 17
5.2.3.2. Joystick status LED ......................................................................... 17
5.2.4. Thumb wheel............................................................................................... 18
5.2.5. Buttons / camera status LED ...................................................................... 18
5.2.5.1. REC button and camera status LED................................................ 19
5.2.5.2. User buttons .................................................................................... 19
5.2.5.3. Back button ..................................................................................... 20
5.2.5.4. Menu buttons................................................................................... 20
5.2.5.4.1. MB2 (QUICK NAV) ..................................................................20
5.2.5.4.2. Quick navigation between main screens................................21
5.2.5.4.3. Quick navigation main screens to adjustment menu .............21
5.2.5.5. HOME button................................................................................... 21
5.2.5.6. System status LED .......................................................................... 21
5.2.6. Touch screen ............................................................................................... 22
All content © 2018, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 5 of 80
6. cPRO hand unit software layout............................................................................... 23
6.1. GUI main screen overview.................................................................................. 23
6.1.1. MAIN screen................................................................................................ 25
6.1.2. FIZ main screen........................................................................................... 25
6.1.2.1. Focus main screen........................................................................... 26
6.1.2.2. Iris main screen................................................................................ 26
6.1.2.3. Zoom main screen........................................................................... 27
6.1.2.4. Lens information main screen.......................................................... 27
6.1.3. Camera main screen ................................................................................... 27
6.1.4. Rangender main screens........................................................................... 28
6.1.4.1. Rangender overview screen .......................................................... 28
6.1.4.2. Rangender settings screen ............................................................ 29
6.1.5. Buttons main screens.................................................................................. 29
6.1.6. Controls main screen .................................................................................. 30
6.1.7. Motors main screens................................................................................... 31
6.2. Adjustment menu ............................................................................................... 32
6.2.1. Adjustment menu overview......................................................................... 32
6.2.2. Adjustment menu navigation....................................................................... 33
6.2.3. Menu ........................................................................................................... 33
6.2.3.1. MAIN................................................................................................ 34
6.2.3.1.1. Radio ......................................................................................34
6.2.3.1.1.1. RF .........................................................................34
6.2.3.1.1.2. Channel ................................................................34
6.2.3.1.1.3. Region ..................................................................34
6.2.3.1.2. Unit .........................................................................................35
6.2.3.1.3. Brightness...............................................................................36
6.2.3.1.3.1. Auto activate.........................................................36
6.2.3.1.3.2. Auto brightness ....................................................36
6.2.3.1.3.3. Display..................................................................36
6.2.3.1.3.4. Keypad brightness ...............................................36
6.2.3.1.3.5. Knob brightness ...................................................36
6.2.3.1.3.6. Slider brightness...................................................37
6.2.3.1.3.7. Joystick brightness...............................................37
6.2.3.1.4. Vibration..................................................................................37
6.2.3.1.4.1. Keypad .................................................................37
6.2.3.1.4.2. Touch screen ........................................................37
6.2.3.1.4.3. Thumb wheel ........................................................37
6.2.3.1.5. Touch screen ..........................................................................37
6.2.3.1.6. Thumb wheel ..........................................................................38
6.2.3.1.7. Stealth mode all......................................................................38
6.2.3.2. CONTROLS ..................................................................................... 38
6.2.3.2.1. Knob .......................................................................................39
6.2.3.2.1.1. Control..................................................................39
All content © 2018, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 6 of 80
6.2.3.2.1.2. Knob direction ......................................................39
6.2.3.2.1.3. Pre-marked rings..................................................39
6.2.3.2.1.4. Lock......................................................................40
6.2.3.2.2. Slider.......................................................................................40
6.2.3.2.2.1. Control..................................................................40
6.2.3.2.2.2. Pre-marked strips.................................................40
6.2.3.2.2.3. Lock......................................................................41
6.2.3.2.3. Joystick ..................................................................................41
6.2.3.2.3.1. Control..................................................................41
6.2.3.2.3.2. Sensitivity .............................................................41
6.2.3.2.3.3. Speed ...................................................................42
6.2.3.2.3.4. Lock......................................................................42
6.2.3.3. LENS................................................................................................ 42
6.2.3.3.1. Load........................................................................................43
6.2.3.3.2. Unload ....................................................................................43
6.2.3.3.3. Create .....................................................................................44
6.2.3.3.3.1. Motor calibration ..................................................44
6.2.3.3.3.2. Select manufacturer .............................................45
6.2.3.3.3.3. Set lens name.......................................................45
6.2.3.3.3.4. Set serial number .................................................46
6.2.3.3.3.5. Focus imperial / metric selection .........................46
6.2.3.3.3.6. Scale calibration ...................................................47
6.2.3.3.3.7. Focus scale ..........................................................47
6.2.3.3.3.8. Iris scale................................................................49
6.2.3.3.3.9. Zoom scale...........................................................50
6.2.3.3.3.10. Save.....................................................................52
6.2.3.3.4. Edit .........................................................................................53
6.2.3.3.5. Delete .....................................................................................54
6.2.3.3.6. Lens view................................................................................54
6.2.3.3.7. Set iris.....................................................................................55
6.2.3.3.8. Set zoom ................................................................................55
6.2.3.3.9. Circle of confusion..................................................................55
6.2.3.4. MOTORS ......................................................................................... 56
6.2.3.4.1. Calibration all..........................................................................56
6.2.3.4.2. Motor settings ........................................................................57
6.2.3.4.2.1. Axis.......................................................................57
6.2.3.4.2.2. Torque...................................................................57
6.2.3.4.2.3. Direction ...............................................................57
6.2.3.4.2.4. Ramp ....................................................................58
6.2.3.4.2.5. Calibrate ...............................................................58
6.2.3.4.3. Stealth mode ..........................................................................58
6.2.3.5. RANGEFINDER................................................................................ 59
6.2.3.5.1. Oset .....................................................................................59
All content © 2018, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 7 of 80
6.2.3.5.2. Limits ......................................................................................59
6.2.3.5.3. Sensitivity ...............................................................................60
6.2.3.5.4. Autofocus ...............................................................................60
6.2.3.5.5. Laser pointer...........................................................................60
6.2.3.6. BUTTONS ........................................................................................ 61
6.2.3.6.1. Assignable user buttons.........................................................61
6.2.3.6.2. User button functions.............................................................62
6.2.3.7. ABOUT............................................................................................. 63
6.2.3.7.1. cPRO hand unit ......................................................................63
6.2.3.7.2. LBUS devices .........................................................................64
6.2.3.7.3. Firmware update.....................................................................64
6.2.3.7.4. Factory reset...........................................................................66
7. Setting up the cPRO system .................................................................................... 67
7.1. using the cPRO motor........................................................................................ 67
7.1.1. Mounting and connecting cables:............................................................... 67
7.1.2. Setting up cPRO hand unit and cPRO motor ............................................. 67
7.1.2.1. Establishing a wireless RF connection ............................................ 67
7.1.2.2. Assigning the cPRO and other motor’s control axis........................ 68
7.1.2.3. Calibrating the cPRO / cforce motors ............................................. 68
7.2. using the cPRO camin with cforce motors......................................................... 69
7.2.1. Mounting and connecting cables:............................................................... 69
7.2.2. Setting up cPRO hand unit and cPRO camin ............................................. 69
7.2.2.1. Establishing a wireless RF connection ............................................ 69
7.2.2.2. Assigning the motor’s control axis................................................... 70
7.2.2.3. Calibrating the cforce motors .......................................................... 70
8. Compatibility............................................................................................................. 71
9. Power connection and disconnection ...................................................................... 71
9.1. Power connection .............................................................................................. 71
9.2. Power disconnection.......................................................................................... 71
10. Appendix .................................................................................................................. 72
10.1. Antenna connector ............................................................................................. 72
10.2. Specications..................................................................................................... 72
10.3. Dimensions and weight ...................................................................................... 73
10.4. Pinouts ............................................................................................................... 74
10.5. Part numbers...................................................................................................... 74
10.6. Service contacts................................................................................................. 78
10.7. International declarations ................................................................................... 79
All content © 2018, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 8 of 80
1. For your safety
Before use, please ensure that all users comprehensively read, understand, and follow the
instructions in this document.
Risk levels and alert symbols
Safety warnings, safety alert symbols, and signal words in these instructions indicate dierent
risk levels:
Danger!
DANGER indicates an imminent hazardous situation which, if not avoided, will result in death
or serious injury.
Warning!
WARNING indicates a potentially hazardous situation which, if not avoided, may result in
death or serious injury.
CAUTION!
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury.
NOTICE
NOTICE explains practices not related to physical injury. No safety alert symbol appears with
this signal word.
Note: Provides additional information to clarify or simplify a procedure.
All content © 2018, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 9 of 80
Vital precautions
Danger!
Risk of electric shock and re!
Short-circuits may result in serious damage to equipment, injury or death.
Before use, read and follow all valid instructions.
Use solely and exclusively as described in the instructions.
Never open. Never insert objects unless instructed to do so. E.g. battery, USB.
For operation, always use a power source as indicated in the instructions.
Always unplug the cable by gripping the plug, not the cable.
Never try to repair. All repair work should be done by a qualied cmotion Service Center.
Never remove or deactivate any safety equipment (incl. warning stickers or paintmarked
screws).
Always protect from moisture, cold, heat, dirt, vibration, shock, or aggressive substances.
Danger!
Risk of re!
Short-circuits and back currents to power supplies/batteries may result in serious damage to
equipment, injury or death.
Always use original ARRI/cmotion LBUS cables to external power sources (D-Tap, XLR)!
ARRI/cmotion LBUS cables to external power sources provide a protection circuit to prevent
back currents to power supplies/batteries.
All content © 2018, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 10 of 80
2. Audience and intended use
NOTICE
The product is solely and exclusively available for commercial customers and shall be used by
skilled personnel only. Every user should be trained according to cmotion guidelines. Use the
product only for the purpose described in this document. Always follow the valid instructions
and system requirements for all equipment involved.
Note: The cPRO hand unit is solely and exclusively for use on professional camera setups.
3. Scope of delivery and
warranty
NOTICE
Product and packaging contain recyclable materials. Always store, ship, and dispose of
according to local regulations.
cmotion is not liable for consequences from inadequate storage, shipment or disposal.
Delivery
On delivery, please check that the package and content are intact. Never accept a damaged or
incomplete delivery. A complete delivery includes:
■cPRO hand unit unit with antenna
■Plain white focus ring for cPRO hand unit
■Plain white iris strip for cPRO hand unit
■ctruss - connection point for cstrap
■User manual download card
■Original packaging
Warranty
For scope of warranty, please ask your local cmotion Service Partner. cmotion is not liable
for consequences from inadequate shipment, improper use or damage through third-party
products.
Inhaltsverzeichnis
Andere cmotion Kamerazubehör Handbücher
