Cobra 601-2108 Bedienungsanleitung

23801 E. La Palma Ave., Yorba Linda, CA 92887 Ph. 714.692.8180 Fax. 714.692.5016

www.cobrausa-vtwin.com

01/20

*Cobra®recommends you always wear a helmet while riding. Please never operate your motorcycle while under

the influence of alcohol and/or drugs. Enjoy the new look of your motorcycle and please ride safely.

momotomot orcycle and please ride safely.

Items Supplied >

1 –FREEWAY BAR

2 –BOLT, BUTTONHEAD 3/8”-16 X 3/4”

2 –3/8 FLAT WASHER

1 –BOLT, BUTTONHEAD 5/16-18 X 1”

1 –5/16 FLAT WASHER

1 –NUT PLATE WITH 5/16-18 PEM

Application(s) >

HARLEY SOFTAIL:

FLSL SLIM 18-20

FXFB/FXFBS FAT BOB 18-20

FLDE DELUXE 18-20

FLSB SPORT GLIDE 18-20

FLFB/FLFBS FAT BOY 18-20

FLHC/FLHCS HERITAGE CLASSIC 18-20

FXBR/FXBRS BREAKOUT 18-20

NOTE: WILL NOT FIT 2019 FXDR 114 OR 18-20

SOFTAILS WITH EXTENDED REACH CONTROLS.

Instruction Manual >

Read all instructions carefully before installing your new Cobra®product!

NOTE: Cobra Freeway Bars add style to your motorcycle. They are not designed to withstand a serious

impact and may not protect you and/or your motorcycle in the event of a crash.

1. Remove any accessories that may prohibit the installation of your new freeway bar.

2. Cover the rear portion of the front fender with masking tape to prevent it from getting scratched during

installation.

3. Remove the small plastic plugs in the holes on the lower frame area where the freeway bar will attach. See

FIGURE 01.

4. If possible, use an assistant to help hold the freeway bar during installation. Carefully position the freeway bar

between the frame down tubes and front tire. Make sure not to capture or pinch any cables or wires with the

freeway bar.

5. Slide the lower freeway bar mounts over the outside of the lower frame down tubes and align the holes. Then

insert the 3/8-16 buttonhead bolts, with flat washers, through the lower freeway bar brackets and into the

threaded holes on the lower frame down tubes. See FIGURE 02. Snug the bolts but do not tighten at this time.

6. Carefully rotate the top of the freeway bar towards the upper frame until the upper freeway bar mount rests on

the frame support bracket. Then insert the 5/16-18 buttonhead bolt, with the flat washer, through the freeway

bar upper mount and through the lower hole of the frame support bracket. See FIGURE 03.

601-2108/601-2108B

Page 1 of 2

DOCUMENT NO. 0017 REV. B

LOWER MOUNTING HOLE

(REMOVE PLUG)

FIGURE 01

23801 E. La Palma Ave., Yorba Linda, CA 92887 Ph. 714.692.8180 Fax. 714.692.5016

www.cobrausa-vtwin.com

01/20

Instruction Manual >

601-2108/601-2108B

Page 2 of 2

7. Position the nut plate with the threaded PEM behind the frame support bracket so that the formed tab is

facing forward toward the front tire. The formed tab will rest on the underside of the frame support bracket

and keep it from turning while tightening the 5/16-18 buttonhead bolt. See FIGURE 03. Snug the 5/16-18

buttonhead bolt but do not tighten at this time.

8. Make sure the freeway bar is positioned correctly and is not interfering with or pinching any cables or wires.

Then fully tighten the upper 5/16-18 buttonhead bolt first and then the lower 3/8-16 buttonhead bolts last.

Retighten all (3) bolts after the first ride and every 500 miles after that.

DOCUMENT NO. 0018 REV. B

CLEANING INSTRUCTIONS:

To clean your black freeway bars use a liquid based soap detergent, such as dishwashing soap applied with

a soft cloth and rinse with clean water. Note: Avoid abrasive cleaning methods such as granular or dry

cleansers, simple green, Scotch-Brite or steel wool pads. Abrasives may breach the coating and shorten life.

3/8-16 X 3/4”

BUTTONHEAD

WITH FLAT WASHER

FIGURE 02

FREEWAY BAR

5/16-18 X 1”

BUTTONHEAD

WITH FLAT WASHER

FIGURE 03

FREEWAY BAR

SUPPLIED NUT PLATE

Dieses Handbuch passt für folgende Modelle

Andere Cobra Motorradzubehör Handbücher

Cobra

Cobra 6057 Bedienungsanleitung

Cobra

Cobra 602-2600 Bedienungsanleitung

Cobra

Cobra Fi2000 Bedienungsanleitung

Cobra

Cobra 06-3750 Bedienungsanleitung

Cobra

Cobra FLHC 2018 Bedienungsanleitung

Cobra

Cobra 602-2500 Bedienungsanleitung

Cobra

Cobra 602-2027 Bedienungsanleitung

Cobra

Cobra 602-2006 Bedienungsanleitung

Cobra

Cobra 602-2046 Bedienungsanleitung

Cobra

Cobra 602-2601 Bedienungsanleitung

Cobra

Cobra Ride Loud Bedienungsanleitung

Cobra

Cobra 602-2615 Bedienungsanleitung

Cobra

Cobra Fi2000 Powrpro Bedienungsanleitung

Cobra

Cobra Fi2000 Bedienungsanleitung

Cobra

Cobra 01-1105 Bedienungsanleitung

Cobra

Cobra Anything's Possible 601-2101B Bedienungsanleitung

Cobra

Cobra HONDA VLX 600 Bedienungsanleitung

Cobra

Cobra Fi2000 Bedienungsanleitung

Cobra

Cobra 601-2107 Bedienungsanleitung

Cobra

Cobra 06-0245-01B Bedienungsanleitung

Cobra

Cobra Fi2000 Bedienungsanleitung

Cobra

Cobra Fi2000 PowrPro Black Bedienungsanleitung

Cobra

Cobra FXLR Bedienungsanleitung

Cobra

Cobra 602-3000 Bedienungsanleitung

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

3M Speedglas 9100 MP Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

Sperian

Sperian Optrel p420 Bedienungsanleitung