Cochlear Baha BP100 Bedienungsanleitung

How to fit Micro Receiver DT20 to Cochlear™ Baha® BP100 and BP 110 Power

Required parts

1. Micro Receiver DT20

2. Programme DT20

3. Cochlear™ Baha®

Before fitting Micro Receiver DT20 to Cochlear Baha® BP100 or BP110

Please ensure that each step below is carefully followed before making any attempt to connect Micro Receiver

DT20 to the Sound processor.

1. Preparing the Micro Receiver DT20

In this step you are asked to use the Step-By-Step guide in the Programmer DT20 in order to configure the

Micro Receiver DT20 for an optimal usage with Phonak iCom.

a. Turn on the Programmer DT20 and attach the Micro Receiver DT20 into its Euro-plug.

b. Select the Step-By Step menu .

c. Select whether the DT20 is fitted to the right

or to the left ear .

d. Skip the Scan instruction animation and scroll to the next step by pressing .

e. Check that the Comfort Digisystem Michrophone is turned off.

On Programmer DT20 select and press .

f. In this step the radio environment will

automatically be scanned by the DT20

Programmer´s built-in spectrum analyser

and the value of the radio interferences

will be presented on the screen ❶.

Ensure that there are no radio interferences

in your radio environment, before you go to the next step.

Green colour indicates acceptable radio interference level.

If any radio interferences higher than -91 dBm are indicated in your radio environment, you need to find the interference sources and

eliminate them.

g. There is no need to scan Cochlear Baha 100/110, due to

low radio interference from these devices.

Press to go to the next step.

h. In this step ❷select and

press .

i. Select and press .

j. Select and press .

k. Turn on your Comfort Digisystem Microphone

and configure it with an appropriate radio channel.

On Programmer DT20 select and press .

❶

❷

l. Press DT20´s Push button and hold it down for

more than 2 sec in order to set Micro Receiver

DT20 in pairing mode.

You will then automatically be guided

to the next step.

m. Send the pairing information from Comfort

Digisystem Microphone to Micro Receiver DT20.

n. Depending on whether the pairing procedure

has been successful ❶ or not ❷, one of

the symbols shown in the pictures to the

right will appear and you will be guided to:

i. The Step o if the pairing has been successful.

ii. The Step l if the pairing has not been successful.

Press to go to the next step.

o. Press to skip the Volume Adjustment Animation.

p. Adjust the volume of R-mode = 0 dB .

Select and press .

You will be presented a chequered flag.

Press to go to the next step.

You will now be guided to the Main menu.

q. In the Main Menu check that all settings are

correctly selected.

Make sure that volume of R+M = Off.

Choose if “Pairing by push button” may be

enabled or disabled .

Select High sensitivity .

r. The settings can be transferred and saved

in any computer via USB.

Connect Programmer DT20 to the computer.

Select and press .

2. Preparing the Sound processor

a. Ensure that the sound processor is configured for DAI (Direct Audio Input) program. This program allows the user to

hear only the audio signal from DAI. In other programs the audio signal from the internal microphone and the DAI will

be mixed.

b. Cochlear Baha® BP100 or BP110 can be configured for Mic relative DAI setting.

The audio signal from DAI will be increased by +6 dB compared to the audio signal from the sound processor´s

internal microphone.

This feature can be enabled by the responsible hearing care professional at the hearing centre.

❶

❷

3. Fitting Micro Receiver DT20 to Cochlear Baha® BP100 or BP110

a. Turn on the Sound processor by pressing and holding down the middle button on the sound processor in approx. 3

seconds.

c. Select a normal listening program and conduct a listening test in quiet, at a Speaker-to-Listener Distance of 1 metre.

If needed, manually adjust the volume control on the sound processor in order to obtain an optimal volume level.

d. Select the DAI program on the sound processor and attach Micro Receiver DT20 into the sound processor´s DAI port.

Micro Receiver DT20 will automatically be detected.

Conduct a listening test in quiet, at a Speaker-to-Listener Distance of several metres this time.

e. The user´s speech recognition performance should be almost the same in the both cases.

If not, use Programme DT20 to optimize the output level of Micro Receiver DT20 until almost the same performance

is obtained.

Note: The DAI program is recommended for use in noise. The other programs can be selected for use in the quiet.

Andere Handbücher für Baha BP100

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cochlear Hörgerät Handbücher

Cochlear

Cochlear Baha 5 Sound Processor Bedienungsanleitung

Cochlear

Cochlear Baha SoundArc Bedienungsanleitung

Cochlear

Cochlear ESPrit ear level Bedienungsanleitung

Cochlear

Cochlear Baha Bedienungsanleitung

Cochlear

Cochlear Nucleus 7 Aqua+ Bedienungsanleitung

Cochlear

Cochlear Nucleus CP802 Bedienungsanleitung

Cochlear

Cochlear Kanso Handbuch

Cochlear

Cochlear Osia 2 Aqua+ Bedienungsanleitung

Cochlear

Cochlear Nucleus 6 Bedienungsanleitung

Cochlear

Cochlear Nucleus 6 Bedienungsanleitung

Cochlear

Cochlear Baha SoundArc Bedienungsanleitung

Cochlear

Cochlear Nucleus 7 Betriebsanleitung

Cochlear

Cochlear Baha Bedienungsanleitung

Cochlear

Cochlear Freedom Bodyworn Bedienungsanleitung

Cochlear

Cochlear Nucleus Freedom Bodyworn Bedienungsanleitung

Cochlear

Cochlear Nucleus 7 CP1000 Bedienungsanleitung

Cochlear

Cochlear Baha Bedienungsanleitung

Cochlear

Cochlear Freedom Bedienungsanleitung

Cochlear

Cochlear Nucleus 8 Bedienungsanleitung

Cochlear

Cochlear Baha Intenso Bedienungsanleitung

Cochlear

Cochlear Baha Attract System Bedienungsanleitung

Cochlear

Cochlear nucleus 7 hybrid Bedienungsanleitung

Cochlear

Cochlear baha cordelle ii Bedienungsanleitung

Cochlear

Cochlear Baha Attract System Bedienungsanleitung

Beliebte Hörgerät Handbücher anderer Marken

Sonic

Sonic Bliss miniBTE Bedienungsanleitung

Lexie

Lexie B1 Stücklistenhandbuch

Widex

Widex FM+DEX Bedienungsanleitung

Siemens

Siemens Triano Bedienungsanleitung

Camplicomms

Camplicomms HC-200 Bedienungsanleitung

Widex

Widex SUPER 220 S2-VSD Bedienungsanleitung

Phonak

Phonak Q90 Bedienungsanleitung

Williams Sound

Williams Sound SoundPlus WIR 237 Leitfaden

Oticon Medical

Oticon Medical Ponto SoundConnector Bedienungsanleitung

Siemens

Siemens Life micon Bedienungsanleitung

Starkey

Starkey Destiny Bedienungsanleitung

Audicus

Audicus The Icon Bedienungsanleitung

Advanced Bionics

Advanced Bionics Slim HP Standard Bedienungsanleitung

Widex

Widex DREAM440 THE DREAM SERIES Bedienungsanleitung

Phonak

Phonak myPilot Bedienungsanleitung

NIKEN

NIKEN NK-401 Bedienungsanleitung

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Bedienungsanleitung

Sonetik

Sonetik GOHEAR Bedienungsanleitung