Cochlear Baha BP100 Bedienungsanleitung

ZONE 7English 简体中文繁體中文 한국어 日本語

User Manual

BP100

™ ®

BahaCochlear

Direct Audio Input

Plastic snap

connector

Microphones

Visual status

indicators

Attachment point

for the safety line

Volume down

button

Program button,

on/off button

Volume up

button

Battery compartment

door

English 简体中文繁體中文 한국어 日本語

2 30 58 86 114

Welcome

Congratulations on your Cochlear™ Baha® BP100. You are now ready to use

Cochlear’s highly advanced bone conduction sound processor.

Your Cochlear™ Baha® BP100 User Manual is full

of tips and advice on how to best use and care

for your Baha BP100 sound processor. By reading

this manual and then keeping it handy for future

reference, you’ll ensure that you get the most out

of your Baha BP100.

4 5

English

Contacting customer service

We strive to provide the best possible products and

services to our clients.Your views and experiences

with our products and services are important to us.

If you have any comments you would like to share,

please contact us.

Customer Service – Cochlear Americas

13059 E. Peakview Avenue,

Centennial, CO 80111, USA

Toll free (North America) 1800 523 5798

Tel: +1 303 790 9010, Fax: +1 303 792 9025

Email: customer@cochlear.com

Customer Service – Cochlear Europe

6 Dashwood Lang Road

Bourne Business Park, Addlestone,

Surrey KT15 2HJ, United Kingdom

Tel: +44 1932 87 1500 Fax: +44 1932 87 1526

Email: info@cochlear.co.uk

Introduction

The Cochlear Baha BP100 is a sound processor

that uses direct bone conduction to transmit

sounds to the cochlea (inner ear). It works by

combining a sound processor with an abutment

and a small titanium implant that is placed in the

skull behind the ear. The titanium implant

integrates with the skull bone through a process

called osseointegration. This allows sound to be

conducted via the skull bone directly to the

cochlea, which improves hearing performance.

You should have received your Baha BP100 sound

processor from your hearing care professional

along with the contents of this kit. To ensure

optimal performance, your hearing care

professional will ﬁt the processor to suit your

needs. Be sure to discuss any questions or

concerns that you may have regarding your

hearing, or use of this system, with your hearing

care professional.

The Cochlear Baha BP100 can be used with a Baha

Softband which does not require an implant.

However, all applicable instructions in this

manual should still be followed.

Cochlear Baha BP100 kit

Your Cochlear Baha BP100 kit includes the following

items:

• Cochlear Baha BP100 sound processor

• Abutment cleaning brush

• Pack of batteries

• Abutment cover

• Safety line

• Extra battery doors

• Magnetic battery removal tool

• Share the Experience test rod

• Document pack (user manual, warranty card,

registration card, MRI card)

Customer Service- Cochlear Asia Paciﬁc

1 University Avenue, Macquarie University

NSW 2109, Australia

Toll free (Australia) 1800 620 929

Toll free (New Zealand) 0800 444 819

Tel: +61 2 9428 6555, Fax: +61 2 9428 6352

or Toll free 1800 005 215

Email: customerservice@cochlear.com.au

Warranty

The warranty does not cover defects or

damage arising from, associated with, or

related to the use of this Product with any

non-Cochlear processing unit and/or any

non-Cochlear implant. See “Cochlear Baha

Global Limited Warranty card” for more

details.

6 7

English

On/off and indicators

Turn on your sound processor by pressing and

holding down the middle button until the visual

indicator ﬂashes 3 times. To turn off your sound

processor, press the middle button and hold it

down for 2 seconds.

If the sound processor is turned off and then turned

on again within 15 minutes, it returns to the last

used program and volume level.

If the sound processor is turned off for longer than

15 minutes, or if the battery is changed or removed,

it will return to the default program and volume

(as set by your hearing care professional) when it

is turned on again.

Using your sound processor

The Cochlear Baha BP100 sound processor is

equipped with buttons for selecting different

listening programs and adjusting the volume level.

Audio and visual indicators can be activated to

alert you to the different settings and processor

status.

Your sound processor is programmed to be used

speciﬁcally on either the right side or the left

side of your head.

“Consult instructions for use” or

“Consult operating instructions”

“Caution, consult accompanying

documents” or “Attention, see

instructions for use”

Audible signal

CE-mark

Temperature limitation

Interference risk

Date of manufacture

Batch Code

Serial Number

Key to symbols

Throughout the manual you will see small symbols.

Please refer to the list below for explanations:

8 9

English

Connecting the sound processor

Use the tilt technique to safely and comfortably

connect and disconnect your sound processor, thus

reducing any undue pressure on the snap connector

and abutment. By tilting the sound processor onto or

off of the abutment, you will avoid any discomfort.

To connect your Cochlear Baha BP100:

1 Move hair from the abutment.

2 Hold the sound processor with the buttons

positioned upwards, tilt it and gently snap

it into place.

3 To release, place one ﬁnger under the sound

processor and gently tilt until it releases.

Note: To avoid feedback (whistling), ensure that

the sound processor is not touching any other

items, such as glasses or a hat.

Audible & visual status indicators

Your sound processor is equipped with audible and

visual status indicators 1 (beeps and LEDs). These

provide a simple and effective means of monitoring

the status of the sound processor, and they are

especially useful for caregivers to ensure that their

child’s sound processor is working at all times.

When you turn on your processor, the visible

indicators ﬂash. If they ﬂash orange, 2 your sound

processor is conﬁgured for the right side of your

head. If they ﬂash blue, 3 your sound processor is

for the left side. If you are a bilateral user, make sure

your processor is used on the correct side.

Note: Your hearing care professional has the

ability to disable the ﬂashing indicators and

beeps, if desired. However, the orange and blue

indicators at startup cannot be disabled.

If your Cochlear Baha

BP100 ﬂashes

Then it is conﬁgured

for use on the

Orange Right side

Blue Left side

10 11

English

Changing the program

Your hearing care professional has, in discussion with

you, selected up to three programs for your Cochlear

Baha BP100 sound processor:

Program 1:

Program 2:

Program 3:

(These programs are suitable for different listening

environments. Ask your audiologist to ﬁll in your

speciﬁc programs).

To switch programs, quickly press and release the

middle button. Audio and visual signals let you know

which program you have switched to:

Program 1: 1 beep / ﬂash

Program 2: 2 beeps / ﬂashes

Program 3: 3 beeps / ﬂashes

Attaching the safety line

Before connecting the sound processor, attach the

safety line to the sound processor and clip the other

end of the safety line to your shirt or jacket.

Cochlear recommends connecting the safety line

when engaging in physical activities. Children should

use the safety line at all times.

12 13

English

Keylock

Keylock protects program and volume level settings

and ensures they cannot be changed inadvertently.

• To activate Keylock, press and hold both volume

buttons for 5 seconds 1. The blue visual indicator

ﬂashes to show that Keylock is activated 2.

• To disable Keylock, press and hold both volume

buttons for 5 seconds 1. The orange visual indicator

ﬂashes to show that Keylock is disabled 3.

Note: Keylock remains in effect even when the

battery is removed. When Keylock is enabled,

the visual indicator will ﬂash 6 times when the

processor is turned on.

Note: Do not press and hold all three buttons at

the same time. This will put the sound processor

in an inappropriate mode.

Note: If both indicators ﬂash - stop. Take out and

reinsert the battery. Retry and make sure to press

only the two volume buttons.

Adjusting volume and setting

the Keylock

Adjusting volume

Your hearing care professional has set the volume

level for your sound processor. You are also able to

manually adjust the volume control.

To control your listening comfort in different

listening environments, you can adjust the volume:

1 For sound processor on right side, press the

front button to increase volume. Press the back

button to decrease volume.

2 For sound processor on left side, press the

front button to decrease volume. Press the back

button to increase volume.

A beep sounds each time a volume button is

pressed. When you reach your default volume, two

short ﬂashes/beeps occur. When you reach the

minimum or maximum volume level, a long ﬂash/

beep occurs.

+ +

–

– –

14 15

English

Using the telephone

For best results when talking on the telephone, place

the receiver near the microphone inlet of the sound

processor instead of near your ear canal. Make sure

the receiver does not touch the sound processor as

feedback may result.

Using the abutment cover

The abutment cover protects the abutment when

the sound processor is not in place. This prevents dirt

from collecting in the abutment.

To attach the cover, gently press it onto the

abutment. Gently lift the cover to remove.

Supporting the processor

Once you are familiar with your program, you can

change the program and the volume level while the

sound processor is attached to the abutment. Make

sure you support the processor from the bottom with

your thumb as you press the buttons with your

index ﬁnger.

16 17

English

Direct Audio Input

The sound processor has a DAI (Direct Audio

Input) port that is used to connect external audio

sources, such as MP3 players (requires the use

of the optional Cochlear Baha Audio Adapter),

Bluetooth devices, and the optional Cochlear

Baha Telecoil directly to your sound processor.

1 Match the accessory connector with the sound

processor’s DAI connector.

2 Gently push the accessory connector into the

DAI port.

Dedicated DAI program and

microphone mixing

An optional DAI program that is set by your hearing

care professional allows you to listen exclusively to

sounds from the DAI.

In all other programs, input from the DAI is

combined with input from the microphone.

Using the telecoil

The telecoil unit improves sound when using some

landline (ﬁxed) and mobile telephones. It also gives

you access to loop facilities in homes and public

buildings. Attach the telecoil to the DAI port.

Using the Audio Adapter

The Audio Adapter allows direct input from

computers, personal stereos, TVs, MP3 players

and other external audio equipment. One end

of the Audio Adapter is connected to the sound

processor at the DAI. The other end is connected

to the audio device.

Warning: Connecting electrical equipment

directly to the sound processor is extremely

dangerous. Cochlear is not liable for any damage

arising as a result of connecting incorrect

equipment or incorrect use.

Using an FM receiver

An FM receiver enables the use of FM systems

that are commonly used in school classrooms.

Your hearing care professional can let you know

what FM receivers are available. Attach your FM

receiver to the DAI port.

18 19

English

Care of abutment and sound

processor

Daily and weekly tasks are required to care for

your abutment and sound processor properly.

Cleaning the abutment

Skin debris or other dirt in the abutment can affect

the sound quality and lead to damage of your sound

processor. Therefore it is very important to clean the

abutment area thoroughly. Use the soft abutment

cleaning brush provided in your Cochlear Baha BP100 kit

for cleaning.

Should you experience persistent irritation, soreness

or other signs of inﬂammation around the abutment,

contact your doctor or hearing care professional.

Daily care

Clean the area around the abutment daily to avoid

the build up of debris. Bathing or showering is a great

opportunity to do this. Use plenty of mild soap and

warm water.

Brush on the side of the abutment rather than directly

on your skin. Your focus should be to remove crust and

debris from around the base of the abutment rather than

brushing your skin. Clean your soft brush with mild soap

and water after caring for your abutment.

Note: During the ﬁrst few weeks after dressing

removal, cleaning with the soft brush may feel

a little rough. Use an alcohol free baby wipe

(or similar) until your skin becomes less sensitive

and you can use the brush comfortably.

Once your abutment is clean, gently dry the area

with a clean towel or tissue. Remove any hair that

may have wrapped around the abutment. If you use

a hair dryer avoid overheating the abutment area.

Note: Ask a friend or relative to help you clean

the abutment. You can also use a hand mirror

or pictures from a digital camera to view the

abutment area from all angles to make sure it

gets cleaned properly.

Note: The abutment cleaning brushes should

be changed at regular intervals. Cochlear

recommends every 3 months.

Andere Handbücher für Baha BP100

Inhaltsverzeichnis

Sprachen:

Andere Cochlear Hörgerät Handbücher

Cochlear

Cochlear Freedom Bodyworn Bedienungsanleitung

Cochlear

Cochlear Nucleus 5 Bedienungsanleitung

Cochlear

Cochlear Baha 5 SuperPower Bedienungsanleitung

Cochlear

Cochlear Baha Series Bedienungsanleitung

Cochlear

Cochlear Baha 5 Wireless Phone Clip Bedienungsanleitung

Cochlear

Cochlear Baha Attract System Bedienungsanleitung

Cochlear

Cochlear Baha Attract System Bedienungsanleitung

Cochlear

Cochlear Nucleus CP802 Bedienungsanleitung

Cochlear

Cochlear nucleus 7 hybrid Bedienungsanleitung

Cochlear

Cochlear Baha SoundArc Bedienungsanleitung

Cochlear

Cochlear Baha Attract System Bedienungsanleitung

Cochlear

Cochlear fmGenie Stücklistenhandbuch

Cochlear

Cochlear baha cordelle ii Bedienungsanleitung

Cochlear

Cochlear baha cordelle ii Bedienungsanleitung

Cochlear

Cochlear Kanso Halo Bedienungsanleitung

Cochlear

Cochlear Nucleus Freedom Bodyworn Bedienungsanleitung

Cochlear

Cochlear Baha 5 Sound Processor Bedienungsanleitung

Cochlear

Cochlear Kanso Handbuch

Cochlear

Cochlear Baha 6 Max Bedienungsanleitung

Cochlear

Cochlear Wireless phone clip Bedienungsanleitung

Cochlear

Cochlear Nucleus 7 Bedienungsanleitung

Cochlear

Cochlear Baha BP100 Bedienungsanleitung

Cochlear

Cochlear Nucleus Freedom Bodyworn Bedienungsanleitung

Cochlear

Cochlear Baha 6 Max Bedienungsanleitung

Beliebte Hörgerät Handbücher anderer Marken

Sonic

Sonic Bliss miniBTE Bedienungsanleitung

Lexie

Lexie B1 Stücklistenhandbuch

Widex

Widex FM+DEX Bedienungsanleitung

Siemens

Siemens Triano Bedienungsanleitung

Camplicomms

Camplicomms HC-200 Bedienungsanleitung

Widex

Widex SUPER 220 S2-VSD Bedienungsanleitung

Phonak

Phonak Q90 Bedienungsanleitung

Williams Sound

Williams Sound SoundPlus WIR 237 Leitfaden

Oticon Medical

Oticon Medical Ponto SoundConnector Bedienungsanleitung

Siemens

Siemens Life micon Bedienungsanleitung

Starkey

Starkey Destiny Bedienungsanleitung

Audicus

Audicus The Icon Bedienungsanleitung

Advanced Bionics

Advanced Bionics Slim HP Standard Bedienungsanleitung

Widex

Widex DREAM440 THE DREAM SERIES Bedienungsanleitung

Phonak

Phonak myPilot Bedienungsanleitung

NIKEN

NIKEN NK-401 Bedienungsanleitung

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Bedienungsanleitung

Sonetik

Sonetik GOHEAR Bedienungsanleitung