Cochlear Baha BP100 Bedienungsanleitung

User Manual

2 30 58 86 115

TR BG RO FA

ZONE 6

BP100

BP110 Power

™ ®

BahaCochlear

BP100

™ ®

BahaCochlear

English Türkçe български Română

143

English

Welcome

Congratulations on your Cochlear™ Baha® BP100 or Cochlear™ Baha® BP110 Power.

You are now ready to use Cochlear’s highly advanced bone conduction sound

processor.

This user manual is full of tips and advice on how

to best use and care for your Baha sound processor.

By reading this manual and then keeping it handy

for future reference, you’ll ensure that you get the

most out of your Baha BP100 or Baha BP110 Power.

Direct Audio Input

Microphones

Visual

status

indicators

Battery compartment

door

Plastic snap

connector

Attachment point for

the safety line

Volume down

button

Volume up

button

Direct Audio Input

Microphones

Visual status indicators

Battery compartment

door

Plastic snap

connector

Attachment point for

the safety line

Volume down

button

Program button,

on/off button

Volume up

button

Program button,

on/off button

BP100 BP110 Power

4 5

English

Introduction

The Cochlear Baha BP100 and Cochlear Baha BP110

Power are sound processors that use direct bone

conduction to transmit sounds to the cochlea (inner

ear). They work by combining a sound processor

with an abutment and a small titanium implant

that is placed in the skull behind the ear. The

titanium implant integrates with the skull bone

through a process called osseointegration. This

allows sound to be conducted via the skull bone

directly to the cochlea, which improves hearing

performance.

You should have received your Baha sound

processor from your hearing care professional along

with the contents of this kit. To ensure optimal

performance, your hearing care professional will ﬁt

the processor to suit your needs. Be sure to discuss

any questions or concerns that you may have

regarding your hearing, or use of this system, with

your hearing care professional.

Both Cochlear Baha BP100 and Cochlear Baha

BP110 Power can be used with a Baha Softband

which does not require an implant. However, all

applicable instructions in this manual should still be

followed.

Your kit includes the following items:

• Cochlear Baha sound processor

• Abutment cleaning brush

• Pack of batteries

• Abutment cover

• Safety line

• Extra battery doors

• Magnetic battery removal tool

• Share the Experience test rod

• Document pack (user manual, warranty card,

registration card, MRI card)

Contacting customer service

We strive to provide the best possible products and

services to our clients.Your views and experiences

with our products and services are important to us.

If you have any comments you would like to share,

please contact us.

Customer Service – Cochlear Americas

13059 E. Peakview Avenue,

Centennial, CO 80111, USA

Toll free (North America) 1800 523 5798

Tel: +1 303 790 9010, Fax: +1 303 792 9025

E-mail: customer@cochlear.com

Customer Service – Cochlear Europe

6 Dashwood Lang Road

Bourne Business Park, Addlestone,

Surrey KT15 2HJ, United Kingdom

Tel: +44 1932 87 1500, Fax: +44 1932 87 1526

E-mail: info@cochlear.co.uk

Customer Service – Cochlear Asia Paciﬁc

1 University Avenue, Macquarie University

NSW 2109, Australia

Toll free (Australia) 1800 620 929

Toll free (New Zealand) 0800 444 819

Tel: +61 2 9428 6555, Fax: +61 2 9428 6352

or Toll free 1800 005 215

E-mail: customerservice@cochlear.com.au

Warranty

The warranty does not cover defects or damage

arising from, associated with, or related to

the use of this product with any non-Cochlear

processing unit and/or any non-Cochlear

implant. See “Cochlear Baha Global Limited

Warranty card” for more details.

6 7

English

Using your sound processor

The sound processor is equipped with buttons for

selecting different listening programs and adjusting

the volume level. Audio and visual indicators can be

activated to alert you to the different settings and

processor status.

Your sound processor is programmed to be used

speciﬁcally on either the right side or the left side of

your head.

Batch Code

Serial Number

Key to symbols

Throughout the manual you will see small symbols.

Please refer to the list below for explanations:

“Consult instructions for use” or

“Consult operating instructions”

“Caution, consult accompanying

documents” or “Attention, see

instructions for use”

Audible signal

CE-mark

Temperature limitation

Interference risk

1 Product name

2 Date of manufacture

3 Serial number

On/off and indicators

Turn on your sound processor by pressing and

holding down the middle button until the visual

indicator ﬂashes 3 times. To turn off your sound

processor, press the middle button and hold it

down for 2 seconds.

If the sound processor is turned off and then

turned on again within 15 minutes, it returns to

the last used program and volume level.

If the sound processor is turned off for longer

than 15 minutes, or if the battery is changed or

removed, it will return to the default program and

volume (as set by your hearing care professional)

when it is turned on again.

Also applicable to

BP110 Power

BP100 BP110 Power

8 9

English

Audible and visual status indicators

Your sound processor is equipped with audible and

visual status indicators 1 (beeps and LEDs). These

provide a simple and effective means of monitoring

the status of the sound processor, and they are

especially useful for caregivers to ensure that their

child’s sound processor is working at all times.

When you turn on your processor, the visible

indicators ﬂash. If they ﬂash orange, 2 your sound

processor is conﬁgured for the right side of your

head. If they ﬂash blue, 3 your sound processor is

for the left side. If you are a bilateral user, make sure

your processor is used on the correct side.

Note: Your hearing care professional has the

ability to disable the ﬂashing indicators and

beeps, if desired. However, the orange and blue

indicators at startup cannot be disabled.

BP110 PowerBP100

If your sound

processor ﬂashes

Then it is conﬁgured

for use on the

Orange Right side

Blue Left side

Connecting the sound processor

Use the tilt technique to safely and comfortably

connect and disconnect your sound processor, thus

reducing any undue pressure on the snap connector

and abutment. By tilting the sound processor onto or

off of the abutment, you will avoid any discomfort.

To connect your sound processor:

1 Move hair from the abutment.

2 Hold the sound processor with the buttons

positioned upwards, tilt it and gently snap it into

place.

3 To release, place one ﬁnger under the sound

processor and gently tilt until it releases.

Note: To avoid feedback (whistling), ensure that

the sound processor is not touching any other

items, such as glasses or a hat.

Also applicable to BP110 Power

10 11

English

Attaching the safety line

Before connecting the sound processor, attach the

safety line to the sound processor and clip the other

end of the safety line to your shirt or jacket.

Cochlear recommends connecting the safety line

when engaging in physical activities. Children should

use the safety line at all times.

Also applicable to BP110 Power

Changing the program

Your hearing care professional has, in discussion with

you, selected up to three programs for your Baha

sound processor:

Program 1:

Program 2:

Program 3:

(These programs are suitable for different listening

environments. Ask your audiologist to ﬁll in your

speciﬁc programs).

To switch programs, quickly press and release the

middle button. Audio and visual signals let you know

which program you have switched to:

Program 1: 1 beep/ﬂash

Program 2: 2 beeps/ﬂashes

Program 3: 3 beeps/ﬂashes

BP110 PowerBP100

12 13

English

Adjusting volume and setting the Keylock

–

+ +– –

BP100

BP110 Power

Adjusting volume

Your hearing care professional has set the volume

level for your sound processor. You are also able to

manually adjust the volume control.

To control your listening comfort in different

listening environments, you can adjust the volume:

1 For sound processor on right side, press the

front button to increase volume. Press the back

button to decrease volume.

2 For sound processor on left side, press the

front button to decrease volume. Press the back

button to increase volume.

A beep sounds each time a volume button is

pressed. When you reach your default volume,

2 short ﬂashes/beeps occur. When you reach the

minimum or maximum volume level, a long ﬂash/

beep occurs.

BP100

Keylock

Keylock protects program and volume level settings

and ensures they cannot be changed inadvertently.

• To activate Keylock, press and hold both volume

buttons for 5 seconds 1. The blue visual indicator

ﬂashes to show that Keylock is activated 2.

• To disable Keylock, press and hold both volume

buttons for 5 seconds 1. The orange visual indicator

ﬂashes to show that Keylock is disabled 3.

Note: Keylock remains in effect even when the

battery is removed. When Keylock is enabled,

the visual indicator will ﬂash 6 times when the

processor is turned on.

Note: Do not press and hold all three buttons at

the same time. This will put the sound processor

into a temporary programming mode with ﬂashing

indicators, and is not suitable for listening.

BP110 Power

Note: If both indicators ﬂash - stop. Take out and reinsert the battery.

Retry and make sure to press only the two volume buttons.

14 15

English

Supporting the processor

Once you are familiar with your program, you can

change the program and the volume level while the

sound processor is attached to the abutment. Make

sure you support the processor from the bottom with

your thumb as you press the buttons with your

index ﬁnger.

Also applicable to BP110 Power

Using the telephone

For best results when talking on the telephone, place

the receiver near the microphone inlet of the sound

processor instead of near your ear canal. Make sure

the receiver does not touch the sound processor as

feedback may result.

Using the abutment cover

The abutment cover protects the abutment when

the sound processor is not in place. This prevents dirt

from collecting in the abutment.

To attach the cover, gently press it onto the

abutment. Gently lift the cover to remove.

Also applicable to BP110 Power

16 17

English

Also applicable to BP110 Power

Direct Audio Input

The sound processor has a DAI (Direct Audio Input)

port that is used to connect external audio sources,

such as MP3 players (requires the use of the

optional Cochlear Baha Audio adapter), Bluetooth

devices, and the optional Cochlear Baha Telecoil

directly to your sound processor.

1 Match the accessory connector

with the sound processor’s DAI

connector.

2 Holding the sound processor

gently at the corners, carefully

push the accessory connector

into the DAI port.

Dedicated DAI program and

microphone mixing

An optional DAI program that is set by your hearing

care professional allows you to listen exclusively to

sounds from the DAI.

In all other programs, input from the DAI is

combined with input from the microphone.

Using the telecoil

The telecoil unit improves sound when using some

landline (ﬁxed) and mobile telephones. It also gives

you access to loop facilities in homes and public

buildings. Attach the telecoil to the DAI port.

Using the Audio adapter

The Audio adapter allows direct input from

computers, personal stereos, TVs, MP3 players

and other external audio equipment. One end

of the Audio adapter is connected to the sound

processor at the DAI. The other end is connected

to the audio device.

Warning: Connecting electrical equipment

directly to the sound processor is extremely

dangerous. Cochlear is not liable for any damage

arising as a result of connecting incorrect

equipment or incorrect use.

Using an FM receiver

An FM receiver enables the use of FM systems

that are commonly used in school classrooms.

Your hearing care professional can let you know

what FM receivers are available. Attach your FM

receiver to the DAI port.

Also applicable to BP110 Power

18 19

English

Care of abutment and sound

processor

Daily and weekly tasks are required to care for your

abutment and sound processor properly.

Cleaning the abutment

Skin debris or other dirt in the abutment can affect

the sound quality and lead to damage of your

sound processor. Therefore it is very important to

clean the abutment area thoroughly. Use the soft

abutment cleaning brush provided in your Baha

sound processor kit for cleaning.

Should you experience persistent irritation,

soreness or other signs of inﬂammation around

the abutment, contact your doctor or hearing care

professional.

1 Daily care

Clean the area around the abutment daily to avoid

the build up of debris. Bathing or showering is a great

opportunity to do this. Use plenty of mild soap and

warm water.

Brush on the side of the abutment rather than directly

on your skin. Your focus should be to remove crust and

debris from around the base of the abutment rather

than brushing your skin. Clean your soft brush with mild

soap and water after caring for your abutment.

Note: During the ﬁrst few weeks after dressing

removal, cleaning with the soft brush may feel

a little rough. Use an alcohol free baby wipe

(or similar) until your skin becomes less sensitive and

you can use the brush comfortably.

Once your abutment is clean, gently dry the area with

a clean towel or tissue. Remove any hair that may have

wrapped around the abutment. If you use a hair dryer

avoid overheating the abutment area.

Note: Ask a friend or relative to help you clean

the abutment. You can also use a hand mirror

or pictures from a digital camera to view the

abutment area from all angles to make sure it

gets cleaned properly.

Note: The abutment cleaning brushes should

be changed at regular intervals. Cochlear

recommends every 3 months.

2 Weekly care

Clean the inside of the abutment on a weekly basis,

using the cleaning brush as described previously.

If you use the abutment cover make sure it is cleaned

at least once a week. Use warm soap and water and

your soft brush to clean the cover.

Long-term care

You will have regular check-ups as determined by your

hearing health care professional. These check-ups help

ensure that the processor works and ﬁts properly and

that your implant area is healthy.

1 1 2

Andere Handbücher für Baha BP100

Inhaltsverzeichnis

Sprachen:

Andere Cochlear Aufnahmegeräte Handbücher

Cochlear

Cochlear CP900 Series Bedienungsanleitung

Cochlear

Cochlear Nucleus CP910 Bedienungsanleitung

Cochlear

Cochlear D1887457 Bedienungsanleitung

Cochlear

Cochlear Nucleus CP810 Bedienungsanleitung

Cochlear

Cochlear Baha BP100 Bedienungsanleitung

Cochlear

Cochlear Kanso CP950 Bedienungsanleitung

Cochlear

Cochlear Nucleus CP910 Bedienungsanleitung

Cochlear

Cochlear Nucleus CP910 Bedienungsanleitung

Cochlear

Cochlear Nucleus Kanso 2 Bedienungsanleitung

Cochlear

Cochlear Baha 5 SuperPower Bedienungsanleitung

Cochlear

Cochlear Nucleus CP810 Bedienungsanleitung

Cochlear

Cochlear Baha 6 Max Bedienungsanleitung

Cochlear

Cochlear Nucleus CP802 Bedienungsanleitung

Cochlear

Cochlear Baha 5 SuperPower Bedienungsanleitung

Cochlear

Cochlear CP900 Series Bedienungsanleitung

Cochlear

Cochlear Baha 5 SuperPower Bedienungsanleitung

Cochlear

Cochlear Baha 4 Bedienungsanleitung

Cochlear

Cochlear Baha 5 SuperPower Bedienungsanleitung

Cochlear

Cochlear Baha 5 Power Bedienungsanleitung

Cochlear

Cochlear Baha BP100 Bedienungsanleitung

Cochlear

Cochlear Baha 4 Montageanleitung

Cochlear

Cochlear Baha 5 SuperPower Bedienungsanleitung

Cochlear

Cochlear baha cordelle ii Bedienungsanleitung

Cochlear

Cochlear Nucleus 6 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch