Cocoon HE150272 Bedienungsanleitung

.
INSTRUCTION MANUAL
Model Number: HE150272
.

.
.

.
Warranty Note
If you experience any issues with this product, or it’s
performance is not what you had expected, please contact
us at Winplus before returning the item to the store.
It is likely that we can resolve any problems for you via
phone or email.
We can be reached on:
Phone: 1300 663 907 (Mon - Fri; 8:30am - 6:00pm EST)
Email: customercar[email protected]om.au
Web: www.winplus.com.au
Important
Getting the most out of your 3D Printer:
Read the manual carefully
It will help you get set up with ease
Visit www.cocooncreate.com.au
We’ve got additional support videos and guides
Call After Sales Support - 1300 663 907
Available Monday - Friday, 8:30am - 5:30pm AEST
We’re always happy to help
.

.
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period
of 12 monthsfrom the date of purchase. Defects that occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion.
The benefits conferred by this warranty are in addition to all rights and remedies in respect
of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian ConsumerLaw.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage.You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
YEAR WARRANTY
1
customercare@winplus.com.au1300 663 907
AUS
3D Printer
MODEL: HE150272 PRODUCT CODE: 52914 02/2016
create
.
.

5
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period
of 12 monthsfrom the date of purchase. Defects that occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion.
The benefits conferred by this warranty are in addition to all rights and remedies in respect
of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian ConsumerLaw.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage.You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
YEAR WARRANTY
1
customercare@winplus.com.au1300 663 907
AUS
3D Printer
MODEL: HE150272 PRODUCT CODE: 52914 02/2016
create
Safety Instructions
Before you get started, please read these important safety instructions.
CAUTION: The Cocoon Create 3D Printer generates high temperatures and includes moving parts
that can cause injury. Never reach inside of the Cocoon Create 3D Printer while it is in operation,
and allow time for the printer to cool down after operation.
Vapours/fumes may be irritating at operating temperatures. Always use the Cocoon
Create 3D Printer in an open, well ventilated area.
Do not leave the Cocoon Create 3D Printer unattended during operation
Contact with extruded material may cause burns. Wait for printed objects to cool before
removing them from the build platform.
Always take care when using the Scraper. Never direct the Scraper towards your ngers.
• The printer must not be exposed to water or rain, or damage will occur.
• The printer is designed to be used with ambient temperature ranging 15°C - 30°C, and humidity
ranging 20% - 50%. Operating outside these limits may result in low quality models.
• In case of emergency, turn o the 3D printer at the power outlet.
• It is recommended that you use eye protection when cleaning/sanding printed models to avoid
small particles contacting eyes.
HOT SURFACE MOVING PARTS
.

6
Contents
Warranty Details 4
Safety Instructions 5
Parts List 8
Technical Specications 9
Product Overview 10
Printer Front View 10
Printer Rear View 11
Print Bed 12
Control Box 13
Quick Guide 14
Construct and Connect 14
Levelling the Bed 15
Printing a File 16
Introduction 18
1.1 What is 3D Printing? 18
1.2 From 3D Design to Printed 3D Object: 18
1.3 Good 3D Printing Practices 20
Installation 21
1.4 Unboxing and Assembly 21
1.5 Control Panel 23
1.5.1 Main Display 23
1.5.2 Menu Map 23
1.5.3 Default Conguration 25
Setup 26
2. Levelling the Heated Print Bed 26
3. Filament 27
3.1 Filament Types 27
3.2 Inserting Filament: 28
3.3 Removing Filament: 29
3.4 Storage: 29
4. Using the Micro SD Card 29
4.1 Loading les from your Computer: 29
4.2 Printing from the Micro SD Card: 30
5. Removing 3D Objects from the Bed 30
.

7
Using Cura 31
6. Creating a GCODE File using Cura 31
6.1 Installing Cura 31
6.2 Adding your Cocoon Create 3D Printer to Cura 32
6.3 Loading a 3D Design into Cura 32
6.4 Viewing and Positioning your 3D Model in Cura 32
6.5 Quick Print Settings 35
6.5.1 Exporting your GCODE File: 36
6.6 Advanced Print Settings 36
6.6.1 Basic Tab Options 36
6.6.2 Advanced Tab Options 39
6.6.3 Plugins Tab 42
6.6.4 Start/End GCODE Tab 42
6.6.5 Expert Settings 43
Servicing 48
7. Servicing your 3D Printer 48
7.1 Replacing the Print Mat 48
7.2 Nozzle Cleaning 48
7.3 Routine Component Check 49
7.4 Storing 49
Finishing 50
8. Finishing Techniques 50
8.1 Useful Tools/Equipment 50
8.2 Removing Support Material 50
8.3 Sanding 51
8.5 Surface Coating 51
Troubleshooting 52
9. Troubleshooting 52
9.1 Printing Problems 52
10.2 Connectivity Problems 53
10.3 Other Problems 54
10. Useful Terms 54
Appendix 56
References 56
Repair and Refurbished Goods or Parts Notice 58
.

8
Parts List
1 x Cocoon Create 3D Printer
(Control Box, Extruder Tower,
Heated Print Bed)
1 x Filament Spool Holder
1 x Filament Spool Stand
1 x Power Cable
1 x USB Cable
1 x 4GB MicroSD Card
1 x Scraper
1 x PTFE Tube
1 x Hex Key Set
6 x Hex Bolts
2 x Cable Ties
1 x 10m PLA Filament
2 x Print Bed Mats
1 x Instruction Manual
1 x Getting Started Guide
1 x Warranty Card
.

9
Technical Specications
Printing
Print Technology: Fused Filament Fabrication (FFF)
Build Volume: 200 x 200 x 180mm
Layer Resolution: 0.1 – 0.4mm
Positioning Accuracy: X 0.012mm
Y 0.012mm
Z 0.004mm
Extruder Quantity: Single Extruder
Extruder Diameter: 0.4mm
Print Speed: 10mm/s - 70mm/s
Travel Speed: 10mm/s - 70mm/s
Supported Print Materials: Cocoon Create Branded PLA, ABS, PVA,
HIPS, PLA Wood, PLA Flex, Conductive
Temperature
Ambient Operating Temperature: 15°C – 30°C
Operational Extruder Temperature: 170°C - 260°C
Operational Print Bed Temperature: 30°C - 120°C
Software
Slicer Software: Cura V14.07
Cura Input Formats: .STL, .OBJ, .DAE, .AMF
Cura Output Format: .GCODE
Connectivity: Micro SD Card, USB port (Expert users only)
Electrical
Input Rating: 100-240V AC, 50/60Hz, 3.5A
Physical Dimensions
Printer Frame Dimensions: 400 x 410 x 400mm
Weight: 10KG
.

10
Product Overview
Printer Front View
1. X Rail
2. X Belt Drive
3. Extruder Spring Lever
4. Extruder Cooling Fan
5. X Stop (Micro Switch)
6. Filament Cooling Fan
7. Extruder Driving Motor
8. Filament Spool Holder
Assembly
9. Tower Frame
6
2
9
8
1
4 7
3
5
.
Inhaltsverzeichnis
Andere Cocoon 3D-Drucker Handbücher





















