DOOR INTERCOM SYSTEM
WITH 2.4” COLOUR LCD
Getting Started Guide
After Sales Support 1300 663 907
www.winplus.com.au
1. UNPACK
Unpack the Cocoon Door Intercom with 2.4” Colour LCD from the packaging and check you have all the components:
• 1 x Exterior Doorbell with Camera and Microphone
• 1 x Internal Handset with Monitor
• 1 x Mounting Bracket for Exterior Doorbell
• 1 x AC Adapter
• 1 x 10 metre cable
• 1 x Doorbell Seal
• 1 x Doorbell Mounting Kit (includes 4 screws, 4 screw
plugs and 4 screw covers)
2. CONNECT
Note: Please ensure your handset is not connected to power when connecting wires.
1. Connect the handset to the monitor base unit using the port on the bottom of the base unit.
2. Slightly loosen each screw for the connection points in the back of the handset base using a Philips head
screwdriver (not supplied).
3. Insert each prong of your 10 metre cable under the screw at the back of the handset base, ensuring the colour
of each connection matches its corresponding connection point (Refer to image below).
4. Tighteneachscrewsoyourconnectionisrmandwillnotcomelooseduringeverydayuse.
5. Connect your AC adapter to your handset by plugging it into the back of the handset base.
TO CAMERA
TO AC ADAPTOR
Note: Prior to installation, please ensure you test your product by connecting the doorbell to the Handset via the 4 pin
connector cable
