Cocraft MB1931-UK Bedienungsanleitung

ENGLISHSVENSKANORSKSUOMIDEUTSCH

Important!

Read the entire instruction manual

carefully and make sure that you fully

understand it before you use the

equipment. Keep the manual for future

reference.

Viktig information:

Läs hela bruksanvisningen noggrant och

försäkra dig om att du har förstått den

innan du använder utrustningen. Spara

bruksanvisningen för framtida bruk.

Viktig informasjon:

Les disse anvisningene nøye og forsikre

deg om at du forstår dem, før du tar

produktet i bruk. Ta vare på anvisningene

for seinere bruk.

Tärkeää tietoa:

Lue nämä ohjeet huolellisesti ja varmista

että olet ymmärtänyt ne, ennen kuin

alat käyttää laitetta. Säilytä ohjeet

myöhempää tarvetta varten.

Wichtiger Hinweis:

Vor Inbetriebnahme die komplette

Bedienungsanleitung sorgfältig

durchlesen und aufbewahren.

HP 318

AUTOMATIC FEED. CUTTING WIDTH 318 MM.

1500 W

18-3051 • 30-9439

PLANER

PLANHYVEL PLANHØVEL

TASOHÖYLÄ DICKENHOBELMASCHINE

Ver. 20170802

Original instructions

Bruksanvisning i original

Originalbruksanvisning

Alkuperäinen käyttöohje

Original Bedienungsanleitung

Art.no Model

18-3051 MB1931-UK

30-9439 MB1931

ENGLISH

Planer

Art.no 18-3051 Model MB1931-UK

30-9439 MB1931

Please read theentire instruction manual before use and save it for future reference.

Wereserve theright for any errors in text or images and for making any necessary

technical changes to this document. Ifyou should have any questions concerning

technical problems please contact our Customer Services.

Safety

General safety instructions

Transportable motor-driven electric tools

Warning! Whenusing electrical tools fundamental safety rules should always be

followed in order to reduce therisk of ﬁre, electric shock and personal injury. Readall

theinstructions before using theproduct and savethem.

1. Keep theworking areaclean!

Cluttered surfaces and tables invite accidents.

2. Think about theworking environment.

Do not expose thetool torain. Donot use tools in damp or wetareas. Makesure

that thelighting is good in theworkplace. Neveruse thetools near ﬂammable

liquids orgases.

3. Avoid electricshock!

Avoid physical contact with earthed objects such as water mains, radiators, hobs

and refrigerators.

4. Keep other people at adistance!

Do not allow people who are not involved in theworking process to touch

themachinery or theextension cable, especially not children. Keepthem at

adistance from theworkplace.

5. Keep themachinery in asafeplace.

When themachinery is not being used, keep it in adry locked area out of reach to

children.

6. Do not overload themachinery.

Your work will be better and safer used at theintended feeding velocity.

7. Use thecorrecttool.

Do not push small tools to do big jobs which demand more powerfultools. Donot

push atool or attachment to perform anoperation it is not designed for; for

example, do not use acircular saw to cuttreebranches or timber.

ENGLISH

8. Wear correct clothing.

Do not wear loosely ﬁtting clothes or jewellery as they may get stuck in

therotatingparts. Non-slip shoes are recommended when working outdoors.

Wearahairnet or something similar if you have longhair.

9. Always wear protective goggles.

Wear protective goggles. Also, use dust ﬁlters or protective masks for dustyjobs.

10. Using suction equipment.

If themachine can attach suction equipment for dust removal, make sure

theequipment is connected and used correctly.

11. Do not handle theelectric cable roughly.

Do not jerk thecable, but instead pull theplug when you remove it from thewall

socket. Makesure electric cable does not come into contact with heat, oil or

sharpedges.

12. Fasten material correctly.

When possible, use clamps or vices to fasten theworkpiece. Itis safer than

securing theobject with yourhand.

13. Do not stretch toofar.

Make sure that you are standing securely and balanced thewholetime.

14. Keep themachine intrim.

Make sure it is clean and theedges are sharpened for optimal effect and good

results. Followthemanual’s recommendations for greasing and changing

attachments. Checktheelectrical cable regularly. Ifit is damaged it should be

changed by aqualiﬁed service technician. Inspectall theextension cables regularly

to make sure they are not damaged. Makesure that themachine handle and lever

are clean, dry and completely free from oil, greaseetc.

15. Turning thepoweroff.

Pull out theplug and push theemergency stop before servicing and changing

attachments, such as planing steel, drills, steel, sanding-belts or blades.

16. Remove all keys and servicetools.

Routinely check that all keys and service tools have been removed from

themachine before you turn thepoweron.

17. Avoid unintentional start-ups.

Do not carry amachine while your ﬁnger is on thepower switch if thecable is in

thesocket. Makesure thepower switch is set to OFF when you put theplugin.

18. Use thecorrect extension cables.

If you use extension cables outdoors, only use those intended for outsideuse.

Useextension cables with sufﬁcient conductor lead areas and unwind

thewholecable.

19. Use Common sense and be careful.

Think carefully before carrying out anoperation, to make sure you perform it safely.

Do not use themachine when you are tired, under medicationetc.

ENGLISH

20. Check thefollowing before starting machine:

• That all covers and other parts are undamaged and fulﬁl their function.

• That moving parts are able to rotate freely and are correctly aligned.

• That no moving parts can getstuck.

• That no defect has emerged.

• Other circumstances that may affect your work performance.

• Acover or some other part that is damaged should be repaired by thepanel

or exchanged. Damagedelectrical cables and circuit breakers should always

be changed by professionals. Neverusethemachine if you are unable to turn

it off or start it up in asatisfactory manner.

21. Use recommended attachments.

Using non-recommended attachments can cause accidents or increase risk of

personal injury.

22. Repairs should only be made by qualiﬁed technicians.

Themachine meets thestipulated safety demands. Repairsto themachine

should always be carried out by experts using original reserve parts; otherwise

themachine may cause accidents or increase risk of

personal injury.

Special safety regulations for planes

• Never use machine without correctly mounted and adjusted protective covers.

• Never use blunt planing irons as this increases risk of kickback.

• Theparts of thecutting steel not in use should be covered.

• When planing shorter pieces apusher should beused.

• When planing narrow pieces further precautions need to be taken to insure safe

work, such as appliances for pushing thework piece from above and springloaded

protection.

• Planes may not be used for folding, milling, making marks orpegs.

Safety symbols

Use ear protection.

Use protective glasses orvisor.

Use breathing protection.

Read through theentire manual before use and save for future reference.

ENGLISH

Regulations for safe work

Anti-kickback heels

Anappliance that stops thework piece from kickingback.

How to avoid kickback

• Make sure you have set thecorrect planing height.

• Inspect thepiece to be planed for nails screws or twigs, remove all theloose twigs,

never plane nails or screws or loose twigs in apiece.

• Make sure blades are sharp and correctlyset.

• Never plane damp or warped pieces.

• Stand straight and hold thepiece of work with both hands when feeding in orout.

Neverstand level with theworkpiece.

ENGLISH

103102

101

105

106

107

108

109

Product description

1. Circuit-breaker

2. Overload protector

3. Transportrolls

4. Lid to carbonbrush

5. Crank for lowering and raising of cutter

6. Carrying handle

7. Scale for depth setting

8. Assemblyhole

9. Transportroll

ENGLISH

1010

Theplane may be lifted with thehandles

on thesides of theframe. Makesure

theextension table is folded away before

moving theplane.

Mounting and starting

• Themachine is supposed to be used in closed environments and should be

placed onto astable and even surface.

• Themachine may be bolteddown.

• Fold away therolling boards for feeding in or out when theplane is not in use or in

storage.

Moving the plane

Assembly

From apackaging and transport

perspective themachine is not

fully assembled on delivery.

• If you discover transport

damage after unpacking,

contact your store immediately.

Donot use themachine.

• Dispose of thepacking in

anenvironmentally

friendly manner.

• Attach rubber feet (10) and

crank lever (5).

ENGLISH

101

Mounting on wooden blocks

If theplane is not mounted on astand

it ought to be mounted on two

wooden blocks to ensure best stability.

Choosetwo wooden blocks and

mount directly on thewooden surface

with four long screws.

Connecting to the mains

• Theelectric cable and possible extension cables should meet standard safety

requirements.

• Themains voltage should correspond to theinformation on themachine’s

identiﬁcationplate.

• Theconnections to themains should be ﬁtted with a10 Amp delayfuse.

• Connections and repairs on themower may only be carried out by qualiﬁed

personnel.

Chip/shaving extractor

Before using for theﬁrst time themachine should be connected to ashavings

extractor.

Starting machine

You start themachine with acircuitbreaker

(1). Ifthemachine should overheat due to

heavy overloading theoverload protector (2) is

automatically triggered. Theoverload protector

can be reset when themotor has cooleddown.

ENGLISH

Use

To consider before planing

Always check prior to planing that theplaning irons aresharp!

Direction of the grain

Always feed timber so that theplane moves in thesame direction as thewoodgrain.

Ifyou plane against thegrain thesurface may not be smooth.

Twigs and other unevenness

Wood with twigs and “wild” ﬁbres are often difﬁcult to create asmooth surface

upon and require extracare. Checkthat thetwigs aresolid. Donot plane wood

with loosetwigs. Planethinly. Keepanextra eye out for kickback and stop planing

immediately if thewood is not feeding evenly.

Snipe

If you do not hold theend of thewood when feeding in and out, and theend is bent

by its own weight, theplaning irons may plane alittle harder causing adent or hack or

hollowing-out of theend. Holdthewood ﬂat against thetable when planing to avoid

hacks and where necessary use support rollers and/or support tables both when

feeding and drawing out thewood. Ifhacks can not be avoided, use longer work

pieces than normal and saw after planing.

Marks following planing

If theplaning irons are damaged or in poor condition, long marks may build up along

theboard after planing. Re-plane or replace bothirons.

Warning! Alwaysinspect thewood before planingit. Neverattempt to plane second-

hand wood with nails in, painted or varnished wood, wood with old glue on, plywood,

hardboard or chipboard. Planingthis material will damage theplaning irons and lead to

serious injury!

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Cocraft Hobel Handbücher

Cocraft

Cocraft HP 720 Series Bedienungsanleitung

Beliebte Hobel Handbücher anderer Marken

Felisatti

Felisatti PF180/1500 Bedienungsanleitung

DeWalt

DeWalt DW 1150 Leitfaden

Triton

Triton TRP UL Kurzanleitung

Melbourne

Melbourne MTC-49407 Bedienungsanleitung

VARO

VARO POWERplus POW1520 Bedienungsanleitung

Powermatic

Powermatic 209 Service-Handbuch

Scheppach

Scheppach Plana 3.0 Montageanleitung

Grizzly

Grizzly G1033X Bedienungsanleitung

Stanley

Stanley STPP7502 Bedienungsanleitung

Palmgren

Palmgren 84115 Bedienungsanleitung

Draper

Draper PT610V Bedienungsanleitung

Makita

Makita PC5000C Bedienungsanleitung

Makita

Makita 1051D Bedienungsanleitung

Berner

Berner BP 40-82 C Bedienungsanleitung

Grizzly

Grizzly G0603X Bedienungsanleitung

King Industrial

King Industrial CT-381FX Bedienungsanleitung

FXA

FXA FXAJD8220 Bedienungsanleitung

Delta Rockwell

Delta Rockwell 22-101 Bedienungsanleitung