Code Blue CB 1-s w Service-Handbuch

800.205.7186 •www.codeblue.com

Administrator Guide

Public Address System

PAS

Installation | Conﬁguration | Operation | Troubleshooting

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 2 of 26

Public Address System

Administrator Guide

WARNING

ONLY QUALIFIED PERSONNEL SHOULD INSTALL THESE UNITS. THE INSTALLATION

SHOULD CONFORM TO ALL LOCAL CODES. IN SOME COUNTRIES, A CERTIFIED ELECTRI-

CIAN MAY BE REQUIRED.

CAUTION

No caution is necessary for this product.

NOTICE TO USERS

whole or part, shall not be reproduced, translated or reduced to any machine-readable form without

prior written approval from Code Blue Corporation.

CODE BLUE CORPORATION PROVIDES NO WARRANTY WITH REGARD TO THIS GUIDE, THE

SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DIS-

CLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICU-

LAR PURPOSE WITH REGARD TO THIS GUIDE, THE SOFTWARE OR SUCH OTHER INFORMA-

TION. IN NO EVENT SHALL CODE BLUE CORPORATION BE LIABLE FOR ANY INCIDENTAL,

CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR

OTHERWISE, ARISING OUT OF OR IN CONNECTIONS WITH THIS GUIDE, THE SOFTWARE

OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

Code Blue Corporation reserves the right to make any modications to this guide or the information

contained herein at any time without notice. The software described herein may also be governed

by the terms of a separate user license agreement.

Code Blue®is a registered trademark of Code Blue Corporation.

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 3 of 26

Public Address System

Administrator Guide

Table of Contents

Section Page

2 Introduction.................................................................................... 4

3 Before You Start...............................................................................6

4 How to Update Connectors.............................................................7

5 Installation & System Setup.......................................................... 9

6 Software Conguration..................................................................17

7 Architectural Overview...................................................................18

8 Wiring Diagrams..............................................................................19

9 Troubleshooting..............................................................................24

10 Spare Parts......................................................................................25

11 Download Information.....................................................................26

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 4 of 26

Public Address System

Administrator Guide

2 Introduction

Thank you for choosing the Public Address option for your Code Blue application. Public Address is

a centralized amplier-based system designed to provide voice paging and broadcast alarm tones

during emergencies. The system can transmit alarm tones and voice messages in a reliable and

safe manner from a central location to all or selected areas of the facility via loudspeakers. The en-

tire operational area can be divided into one or more zones, which can be accessed independently

either for announcements or alarm broadcasting. Loudspeakers are installed in these zones. There

are no limitations to the number of zones in a system or number of loudspeakers in each zone. The

system is designed to o󰀨er clear reproduction of sound and intelligibility, even in high noise areas.

2.1 Overview

This manual contains all of the Code Blue PAS information needed on the CB 1 series with Public

Address, CB 5-s with Public Address, WM-180 Public Address System, CB 2-e with Public Address

and 360° PAS retrot top. This manual contains a general overview of the Code Blue PAS options

and its application, installation and wiring.

CB 5-s w/ PAS WM 180° CB 2-e w/ Public Address 360° PAS Retrot TopCB 1-s w/ PAS

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 5 of 26

Public Address System

Administrator Guide

2.2 PAS Options:

2.2.1 CB 1 Series with Public Address Units – Outdoor

• Large diameter towers; analog or IP

• An excellent choice when instant mass notication of a geographic area is essential.

The unique six-speaker design delivers optimal audio source dispersion utilizing state-

of-the-art ampliers and horn array.

2.2.2 CB 5-s with Public Address Units – Outdoor

• Small diameter towers

• Exclusively designed as an emergency communication system to deliver maximum

audio clarity and range to ensure notications are accurately broadcast to your intended

audience.

2.2.3 CB 2-e with Public Address Units – Indoor & Outdoor

• Wall or pole mount; analog or IP

• An excellent choice for parking decks, dorm entrances, hallways and public transit cen-

ters where instant mass notication of a geographic area is essential.

2.2.4 360 ° PAS Retrot Tops – Outdoor

• PAS top kit for existing standard CB 1 series towers in the eld to provide public ad-

dress capabilities.

• The unique six-speaker design delivers optimal audio source dispersion utilizing state-

of-the-art ampliers and horn array.

2.2.5 WM-180 Wall Mount PAS unit – Indoor & Outdoor

• Wall or pole mount option remotely adds public address capabilities to new or existing

CB units.

• By adding an analog or IP controller board, you enable the WM-180 to be directly man-

aged by Code Blue’s Blue Alert® MNS (Mass Notication System) soft¬ware, granting

the user messaging options. The controller also monitors the amplier and speaker for

various failures, which are reported to the appropriate maintenance personnel, and al-

lows the user to call a single WM-180 unit for a targeted message.

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 6 of 26

Public Address System

Administrator Guide

3 Before You Start

3.1 NFPA 72 Chapter 24

This regulation covers the application, installation, location, performance, inspection,

testing and maintenance of ﬁre alarm systems, supervising station alarm systems, public

emergency alarm reporting systems, ﬁre warning equipment and emergency communi-

cations systems (ECS), and their components.

3.2 UFC-4-021-1

This provides technical criteria for systems that implement mass notiﬁcation in compli-

ance with the Department of Defense’s antiterrorism requirements. Implement national

design standards and recommendations for mass notiﬁcation systems, as provided in

NFPA 72, including Annex E.

3.3 Precautions

Code Blue recommends professional services before the order and installation of all PAS

products.

For survey information, please email customerservice@codeblue.com.

3.3.1 PAS Site Survey – call for scheduling and pricing

• Ambient Noise Survey: Measures the sound energy ﬂowing into, or outward

from, a speciﬁed area.

• System Design Survey – Involves the placement, wiring and installation of PAS

equipment.

• Complete Survey – Includes ambient noise and system design of PAS equip-

ment.

3.4 In Case of Breakdown

Code Blue Technical Support

Email: tss@codeblue.com

Toll free: 800-205-7186, Opt. 3

3.5 In Case of Abnormal Operation

If the unit emits smoke or an unusual smell, water or other foreign materials enter the en-

closure, or the unit is dropped or the enclosure is damaged, power o immediately and

contact Code Blue Customer Service.

Email: customerservice@codeblue.com

Toll free: 800-205-7186, Opt. 2

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 7 of 26

Public Address System

Administrator Guide

4 How to Update Connectors

As of 2020, many Code Blue products come with Wago connectors. These connectors provide

ease of use and a much stronger connection. Below are the steps needed to change to the new

connectors.

Example:

Cut o both wires.

Strip all wires and twist tight.

Wago socket

connectors to

add to your wires.

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 8 of 26

Public Address System

Administrator Guide

Place small screwdriver into square hole and push down. Insert cut wire into

round hole and remove screwdriver. Repeat on the rest of the connectors.

Once all connectors have been switched, you are ready to apply power to the

LED.

Please contact [email protected] if you need further assistance.

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 9 of 26

Public Address System

Administrator Guide

5 Installation & System Setup

This section covers the following units:

• CB 1 Series with Public Address, including the 360° PAS Retroﬁt Kit

• CB 5-s with Public Address

• CB 2-e with Public Address

• WM-180°

5.1 CB 1 Series with Public Address, including 360° PAS Retrot Kit

The following models are covered in the installation instructions for CB 1 Series with

Public Address or the 360° PAS Retroﬁt Kit:

• CB 1-e

• CB 1-s

5.1.1 Tools Required

• Ladder – to reach the top of the unit.

• Security bit – to secure the PAS top to the adapter ring.

• 6mm Allen wrench – to secure the PAS adapter ring to the top of the unit.

• 3/8” socket set - to mount the mounting plate containing the new toroid

transformer.

5.1.2 Before You Begin

• Remove 120V AC power from the unit.

5.1.3 Install Adapter Ring

5.1.3.1 Remove the existing dome top assembly. Disconnect the red/black and

yellow/yellow wiring harnesses connected to the beacon/strobe mount-

ed in the dome top assembly.

5.1.3.2 Place the adapter ring on top of the bollard and tighten the three Allen

set screws to hold in place (see Figure 2 on Page 12).

5.1.4 Transformer Installation

Install new toroid transformer.

NOTE: Skip this section if you ordered a CB 1 Series with Public Address

as a complete unit.

5.1.4.1 Remove lower access door on the CB 1 bollard.

5.1.4.2 Remove the existing 120V AC step down transformer.

5.1.4.3 Install toroid transformer with mounting plate using supplied hardware

(see Figure 1 on Page 10).

5.1.4.4 Connect incoming 120V AC wiring to the transformer using the junc-

tion box on mounting plate. Refer to included wiring diagram for wiring

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 10 of 26

Public Address System

Administrator Guide

terminations (See Figure 5 on Page 18).

5.1.4.5 Run the supplied ampliﬁer wiring harness, beacon/strobe power har-

ness (red/black), beacon/strobe auxiliary harness (yellow/yellow), 7 pin

control cable and RJ-11 audio cable to the top of the bollard. Connect

the molded quick connector on the red/black harness to the manifold

connector on the transformer. Connect the yellow/yellow harness, 7 pin

control cable and RJ-11 to the phone board. Connect the large white

connector of the ampliﬁer wiring harness to the wiring connector on the

transformer. Refer to the included wiring diagram for wiring termina-

tions (See Figure 1 below).

5.1.5 Install 360° PAS Speaker Unit

5.1.5.1 Connect the red/black and yellow/yellow wiring harnesses to the red/

black and yellow/yellow wiring pigtails coming from the beacon/strobe.

5.1.5.2 Connect the 6 pin wiring harness, 7 pin control cable and RJ-11 audio

cable to the ports on the ampliﬁer.

5.1.5.3 Set the PAS speaker unit on the adapter ring, lining up the screw holes

at the bottom of the unit. Secure the speaker unit with the provided

security screws.

5.1.5.4 Reapply power to the unit.

Figure 1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Code Blue Sicherheitssystem Handbücher

Code Blue

Code Blue CB 1 Series Service-Handbuch

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung