Code CR7020 Bedienungsanleitung
1
Note from the Code Team
Thank you for purchasing the CR7020! Approved by infection control specialists, the CR7000 series
is fully enclosed and built with CodeShield® plastics, known to withstand the harshest chemicals used
in the industry. Made to protect and extend the battery life of Apple’s iPhone® 8 and SE (2020), the
CR7020 will keep your investment safe and clinicians on the go. The DragonTrail™ glass screen
provides another layer of quality for the highest level of protection on the market. Easily swappable
batteries keep your case running as long as you are. Don’t wait for your device to charge again—
unless that’s how you prefer to use it, of course.
Made for enterprises, the CR7000 series product ecosystem provides a durable, protective case,
flexible charging methods, and a battery management solution so you can focus on what matters.
We hope you enjoy your enterprise mobility experience. Have any feedback? We’d love to hear from
you.
Your Code Product Team
2
Table of Contents
Case and Accessories .............................................................................................................3
Product Kits ...................................................................................................................................3
Battery Charging Kits......................................................................................................................3
Cables............................................................................................................................................3
Accessories ....................................................................................................................................3
Services..........................................................................................................................................3
Product Assembly ..................................................................................................................4
Unpacking and Installation .............................................................................................................4
Inserting iPhone.................................................................................................................................................... 4
Inserting/Removing Batteries .............................................................................................................................. 7
Charger Assembly and Mounting......................................................................................................................... 7
Battery Charging and Best Practices .................................................................................................................. 11
Maintenance and Troubleshooting ......................................................................................12
Approved Disinfectants ................................................................................................................12
Routine Cleaning and Disinfection ................................................................................................12
Troubleshooting...........................................................................................................................12
Contact Code for Support .............................................................................................................12
Warranty.............................................................................................................................13
Legal Disclaimer ..................................................................................................................13
Statement of Agency Compliance.........................................................................................14
3
The following tables summarize the parts included within the CR7000 series product
line. More product details can be found on Code’s website.
Product Kits
Description
CRA-A172
CRA-A175
CRA-A176
Cables
Part Number
CRA-C34
CRA-C70
Accessories
Part Number
CRA-B718
CRA-P31
CRA-P4
Services
Part Number
SP-CR720-E108
*Other CR7000 series service and warranty options can be found on Code’s website
Part Number
iPhone 8/SE
CR7020-PKX2U-8SE
CR7020-PKX2X-8SE
CR7020-PKXBX-8SE
CR7020-PKXXU-8SE
CR7020-PKXXX-8SE
Part Number
CRA-B718B
Case and Accessories
Code Reader Kit - CR7020 (iPhone 8/SE Case, Light Gray, Palm), Battery,
Spare Battery, 3-ft. Straight USB Cable
Code Reader Kit - CR7020 (iPhone 8/SE Case, Light Gray, Palm), Battery,
Spare Battery
Code Reader Kit - CR7020 (iPhone 8/SE Case, Light Gray, Palm), Battery
Blank
Code Reader Kit - CR7020 (iPhone 8/SE Case, Light Gray, Palm), Battery,
3-ft. Straight USB Cable
Code Reader Kit - CR7020 (iPhone 8/SE Case, Light Gray, Palm), Battery
Description
CR7018/CR7020 5-Bay Charging Station and 3.3 Amp US Power Supply
CR7018/CR7020 10-Bay Charging Station and 3.3 Amp US Power Supply
Code Reader Accessory for CR7018/CR7020 - Charger Upgrade Package
(Split Cable Adapter, 5-Bay Battery Charging Station)
Description
Straight cable for CR7000 series, USB to Micro USB, 3 ft (1 m)
Split Cable Adapter for 10-Bay Charger
Description
CR7018/CR7020 Battery
Code Reader Accessory for CR7018/CR7020 - Battery Blank
3.3 Amp US Power Supply
US Power Supply - 1 Amp USB Wall Adapter
Description
Code Reader Accessory for CR7020 - Replacement Top Plate for iPhone 8/SE
(2020), 1 count
4
Product Assembly
Unpacking and Installation
Read the following information before unpacking or assembling the CR7020 and its accessories.
Inserting iPhone
The CR7020 houses Apple’s iPhone 8/SE (2020) models.
The CR7020 case will arrive with the top and bottom carriage connected. With a thumb on
the right and left side of the speaker opening, push up approximately 5 millimeters to clear
the lightning connector.
iPhone 8/SE top plate
5
Pull the top plate toward you, away from the bottom carriage. Do NOT try to slide it all the
way up.
Before inserting the iPhone, thoroughly clean the iPhone screen and both sides of the glass
screen protector. Screen responsiveness will be hindered if the screens are dirty.
Insert the iPhone into the top plate; it will click into place.
6
Replace the top plate into the bottom carriage directly above the lightning connector, similar
to the removal process; the top plate will be inserted approximately 5 millimeters from the
edge of the bottom carriage. Push down on the top plate to secure the iPhone onto the
lightning connector and seal the case.
Do NOT try to slide it down from the top.
Your CR7020 case will come with two screws and a 1.3 mm hex key. For larger
deployments, it is recommended to procure a specialized tool for quick assembly.
Insert the screws to secure phone and case.
The following URLs will direct you to
recommended tools for installing the provided
screws.
•Ultra-Grip Screwdriver
ohttps://www.mcmaster.com/7400A27
•8 Piece Hex Screwdriver Set
ohttps://www.mcmaster.com/57585A61
7
Inserting/RemovingBatteries/Battery Blanks
Only Code’s CRA-B718 batteries are compatible with the CR7020/CR7018 cases.
Insert a B718 battery or B718B Battery Blank into the cavity; it will click into place.
The fuel gauge LEDs will light up, indicating the battery’s state of charge. If the LEDs do
not light up, fully charge the battery before using.
To verify the battery is properly connected, a lightning bolt will be
located on the iPhone’s battery, signifying a charge status and
successful battery installation. To remove the battery, push both
battery compartment latches inward until the battery pops out. Pull the
battery from the cavity.
8
Charger Assembly and Mounting
The CR7020/CR7018 chargers are designed to charge the B718 batteries. Customers can
purchase 5 or 10-bay chargers. Two 5-bay chargers are mechanically interlinked to create
the 10-bay charger. 5 and 10-bay chargers use the same power supply (CRA-P31), but
have different cables: the 5-bay charger has a single, linear cable where the 10-bay
charger requires a two-way splitter cable (CRA-C70).
Note: Use only cables supplied by Code to ensure proper communication and adequate
charge rates. Only Code cables are guaranteed to work. Damage caused using third-party
cables will not be covered under warranty.
5-Bay Charger Installation
The 5-bay charging station will hold and charge 5 batteries from zero to full charge within 3
hours. The CRA-A172 charger kit comes with a 5-bay charger, cable and power supply.
Insert the cable into the female port on the bottom-side of the charger. Route the cable
through the grooves and connect it to the power supply.
LED charge indicators reside on both sides of each battery bay to quickly check the charge
status from any angle.
Note: There is a delay of up to thirty minutes between the battery gauge indicating it’s fully
charged and the charger LEDs switching from blinking to solid. LED indicator definitions are
presented in the “Inserting Batteries into the Charger” section.
9
10-Bay Charger Installation
The 10-bay charging station will hold and charge 10 batteries from zero to full within five
hours. The CRA-A175 charger kit will come with two 5-bay chargers, a splitter cable adapter
and power supply.
Interlink the two 5-bay chargers by sliding one into the other.
The split cable adapter will have one longer end. Insert
the longer end of the cable into the charger’s female
port furthest from the power supply. Route the cable
through the groove on the bottom side of the charger.
Dieses Handbuch passt für folgende Modelle
8
Inhaltsverzeichnis
Andere Code Handy-Zubehör Handbücher
Beliebte Handy-Zubehör Handbücher anderer Marken
Zartek Mobile
Zartek Mobile ZA-350 Bedienungsanleitung
Playbrush
Playbrush Playbrush Bedienungsanleitung
Sony
Sony SCR44 Bedienungsanleitung
Nautilus
Nautilus V5 Bedienungsanleitung
BigPantha
BigPantha Phone Mount Bedienungsanleitung
PRYME Radio Product
PRYME Radio Product PRYMEBLU BT-PTT-M Bedienungsanleitung
