Cognex MX1100X-IOS Bedienungsanleitung
MX-1100
Quick Reference Guide
2020 June 05
Revision:1.0.0.10
Precautions
To reduce the risk of injury or equipment damage, observe the following precautions
when you install the Cognex product:
lRoute cables and wires away from high-current wiring or high-voltage
power sources to reduce the risk of damage or malfunction from the
following causes: over-voltage, line noise, electrostatic discharge (ESD),
power surges, or other irregularities in the power supply.
lChanges or modifications not expressly approved by the party responsible
for regulatory compliance could void the user’s authority to operate the
equipment.
lEnsure that the cable bend radius begins at least six inches from the
connector. Cable shielding can be degraded or cables can be damaged or
wear out faster if a service loop or bend radius is tighter than 10X the cable
diameter.
lThis device should be used in accordance with the instructions in this
manual.
lAll specifications are for reference purposes only and can change without
notice.
2
MX-1100 Layout
Layout
1Scanner head (rotatable by 45°)
2 Indicator LEDs
3 Side trigger buttons
4 Power button
5 Touch screen
6 Home button
7 Speaker vents
8 Recessed area for mobile camera
9 Slider to lock battery cover
10 Battery cover
11 Lanyard hook
12 End cap of pistol grip*
13 Trigger button on the pistol grip*
*Pistol grip is optional
3
MX-1100 Accessories
Accessory
Battery for reader (3120 mAh) DMA-MTBATTERY-01
Battery for pistol grip accessory (3070 mAh) DMA-HHBATTERY-01
Pistol grip
Note: The grip features its own
trigger button and an additional
battery which can be charged via the
charging station.
DMA-GRIP-01
Belt holster DMA-HOLSTER-01
DMA-HOLSTER-02
Charging station (inductive) DMA-MTBASE-US
DMA-MTBASE-EU
Charging station (non-inductive) DMA-MTBASEP-US
DMA-MTBASEP-EU
Multi-device charger DMA-MTBASE4-US
DMA-MTBASE4-EU
DMA-MTBASE4BKT-US
DMA-MTBASE4BKT-EU
Multi-battery charger DMA-MBC-US
DMA-MBC-EU
Wireless car charger DMA-VMCHARGER-00
Power supply for charging station 24V/24W DMA-24VPWR-US
DMA-24VPWR-EU
4
Accessory
USB Type-C battery charger kits
1. USB Type-C Battery Cover
(DMA-MXUSB-00) + USB
Type-C 3Amp Car Charger
(DMA-MXUSB-CHARGER)
2. USB Type-C Battery Cover
(DMA-MXUSB-00) + Handstrap
(DMA-MXSTRAP-00)
3. USB Type-C Battery Cover
(DMA-MXUSB-00) + USB
Type-C 3Amp Car Charger
(DMA-MXUSB-CHARGER) +
Handstrap (DMA-MXSTRAP-
00)
1. DMA-MXUSB-01
2. DMA-MXUSB-02
3. DMA-MXUSB-03
Passive car holder1DMA-VMHOLDER-00
1Using or storing the device outside of the recommended temperature ranges may damage or reduce the lifespan of
the battery. Leaving the MX Series Mobile Terminal with a mobile device in direct sunlight for an extended amount
of time can raise the temperature above the recommended limit.
5
Accessory
Top Cover DMA-COVERKIT-S6
DMA-COVERKIT-S7
DMA-COVERKIT-S8
DMA-COVERKIT-S9
DMA-COVERKIT-I5
DMA-COVERKIT-I6
DMA-COVERKIT-S4
DMA-COVERKIT-S5
DMA-COVERKIT-J3
DMA-COVERKIT-J327
DMA-COVERKIT-J330
DMA-COVERKIT-A3
DMA-COVERKIT-X4
DMA-COVERKIT-N42
DMA-COVERKIT-s10e
DMA-COVERKIT-iX
6
Dimensional Drawings
7
Field of View and Reading Distances
Working Distance Horizontal Values Vertical Values
Z1= 15 mm X1= 6.4 mm Y1= 4.09 mm
Z2= 210 mm X2= 148.31 mm Y2= 94.67 mm
Z3= 420 mm X3= 301.14 mm Y3= 192.22 mm
8
Distances in mm / 1D min code Distances in mm / 2D min code
25-105 5 MIL 15-70 5 MIL
25-158 7.5 MIL 15-105 7.5 MIL
25-210 10 MIL 15-140 10 MIL
25-420 20 MIL 15-275 20 MIL
Note: Due to tolerances, ranges can vary by +/- 5 mm for small codes to +/- a couple of centimeters for
large codes.
9
Assembling the Reader
1. Place the rubber insert on the base unit.
2. Plug the USBcable into the base unit.
3. Put the mobile device on the rubber
insert and connect it to the base unit with
the USB cable.
4. Attach the top cover.
5. Tighten the screws to fix the top cover.
6. Open the back cover to take out the
reader battery.
7. Plug the pistol grip cable into the grip
connector.
8. Insert the reader battery.
9. Assemble the reader with the pistol grip
and tighten the screws.
Note: For details, see the MX-1100 Reference Manual.
For a list of supported mobile devices, please contact Cognex.
10
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Cognex Handheld Handbücher
Cognex
Cognex MX-1502 Bedienungsanleitung
Cognex
Cognex MX-1000 Bedienungsanleitung
Cognex
Cognex MX-1502 Bedienungsanleitung
Cognex
Cognex MX-1000 Bedienungsanleitung
Cognex
Cognex MX-1100 Bedienungsanleitung
Cognex
Cognex MX-1502 Bedienungsanleitung
Cognex
Cognex MX-1000 Bedienungsanleitung
Cognex
Cognex DataMan 8072 Bedienungsanleitung
Cognex
Cognex MX-1000 Bedienungsanleitung
Cognex
Cognex MX-1500 Bedienungsanleitung
