Coleman BackHome Select 9392-136 Bedienungsanleitung

BackHome®Pavilion

11’3”x11’3”

Instructions apply to Part Number 9392-136

Things you should know:

Read all instructions before set-up.

Pavilion can be staked down or bolted down.

Initial frame set-up may be done upright or upside down.

Dual Track w/ End Cap

Part: B2 (Qty.: 2)

Part No.: 9392-2531

Dual Track w/out End Cap

Part: A1 (Qty.: 2)

Part No.: 9392-2501

Dual Track w/out End Cap

Part: A2 (Qty.: 2)

Part No.: 9392-2511

Fluted Columns w/ End Caps

Part: C (Qty.: 4)

Part No.: 9392-2541

Dual Track Corner Brace – Small

Part: D (Qty.: 4)

Part No.: 9392-2551

Dual Track Corner Brace – Large

Part: E (Qty.: 4)

Part No.: 9392-2561

Center Hub

Part: G (Qty.: 1)

Part No.: 9392-2581

Corner Brackets

Part: J (Qty.: 4)

Part No.: 9392-2611

Planter Hooks

Part: K (Qty.: 4)

Part No.: 9392-2621

Track/Column Brace

Part: F (Qty.: 8)

Part No.: 9392-2571

Corner Roof Pole

Part: H (Qty.: 4)

Part No.: 9392-2591

Side Roof Pole

Part: I (Qty.: 4)

Part No.: 9392-2601

Dual Track w/ End Cap

Part: B1 (Qty.: 2)

Part No.: 9392-2521

Parts List

Decorative Plates

Part: L (Qty.: 4)

Part No.: 9392-2631

Mounting Plates

Part: M (Qty.: 4)

Part No.: 9392-2641

Allen Wrench/

Phillips Screwdriver

Included

Other Suggested Tools:

Power screwdriver with

Phillips Head attachment

For more permanent

mounting, utilize the

appropriate anchor bolts

for your particular

application (not provided).

Canopy – (Qty.: 1)

Part No.: 9392-2651

Privacy Walls (Qty.: 4)

Part No.: 9392-2661

Tie Backs (Qty.: 4)

Part No.: 9392-2691

Phillips Head Machine

Screws – Large (Qty.: 46)

Part No.: 9392-2701

Note: Extra fastener are included for your convenience.

Phillips Head Machine

Screws – Small (Qty.: 26)

Part No.: 9392-2711

Phillips Head Sheet

Metal Screws – Small

(Qty.: 75)

Part No.: 9392-2721

Long Hex Head Cap

Screw (Qty.: 21)

Part No.: 9392-2731

Acorn Nuts (Qty.: 51)

Part No.: 9392-2741

Track Hooks

(Qty.: 101)

Part No.: 9392-2751

Screen Walls (Qty.: 4)

Part No.: 9392-2671

Roof Vent Cover (Qty.: 1)

Part No.: 9392-2681

Stakes

(Qty.: 32)

Part No.:

9392-2761

Sort Dual Track Pieces: Layout so that the tracks are all going the the same direction.

A1 (male) matches to A2 (without end cap) and B1 to B2 (with end cap).

Add track hooks. Insert 12 hooks

per track per frame side (24 hooks

each side). It will be easier to

attach the side walls if the hooks

are inserted with the opening to the

grooved side of the track. (illus. 2)

Connect the matching Dual Track pieces A1 to A2 and B1 to B2 and secure with 4 Phillips Head Sheet

Metal Screws – Small. Track Side should be facing the same way on both pieces. Repeat for all other

Dual Track sections.

illus. 1

illus. 2

illus. 3

Set Up Instructions

Phillips Head Sheet Metal Screws _ Small

Attach the Dual Track sections to the Columns with the Long Hex Cap Screws (16) by

lining up the pre-drilled holes and hand tightening the screws. There are screw holes on

two sides of the column, make sure that one set of screw holes is facing out and one set

is pointing up. DO NOT FULLY TIGHTEN. Assembled Dual Track A sections will go on

opposites side from each other. (see illus. 5)

Dual Track side with hooks

End cap

Long Hex

Cap Screw

B1&B2 B1 & B2

A1 & A2

illus. 4

illus. 5

Notice that A and B sections are both opposite each other. Leave frame hand tightened

only at this point.

Dual Track Corner Brace – Small (D)

Attach the Small corner brace to the

column with 2 Phillips Head Machine

Screws – Small.

From the outside of the frame insert 4

Phillips Head Machine Screws – Large

through the Dual Track and Small

Corner Brace and secure with 4

Acorn Nuts. (illus. 6)

Repeat for other 3 corners.

Dual Track Corner Brace – Large (E)

From the outside of the frame insert 4

Phillips Head Machine Screws – Large

through the Dual Track and Small

Corner Brace and secure with 4

Acorn Nuts. (illus. 7)

Repeat for other 3 corners.

Track/Column Brace (F)

Position the Track/Column Brace (F)

on the inside of the Dual Track and the

outside of the Column. Secure to the

Column with Phillips Head Machine

Screw – Small. Insert Phillips Head

Machine Screw – Large through the Dual

Track from the outside and attach Acorn

Nut on open end. Repeat for second

Track/Column Brace on other side of

corner (illus. 8).

Repeat for other 3 corners.

illus. 6

illus. 7

illus. 8

(E)

(D)

(F)

Phillips Head Machine

Screws – Large

Phillips Head Machine

Screws – Small

Phillips Head

Machine

Screws – Small

Note: Brace attaches to the inside of the dual track

and to the outside of the column.

Phillips Head Machine

Screws – Large

Phillips Head Machine

Screws – Large

Tool tighten all the Long Hex Head Cap

Screws connecting the Dual Tracks and the

Columns. Tool tighten all bolts and nuts.

Completed frame upside down. (illus. 9)

Flip frame upright. Requires 2 to 4 people

Note: Frame can be assembled in upright

position from the beginning if preferred.Simply

follow the same directions, but note that the

illustrations to this point are upside down.

(illus. 10)

Center Hub (G)

Corner Roof Pole (H)

Side Roof Pole (I)

Attach the 4 Corner Roof Poles (H)

and the 4 Side Roof Poles (I) by

inserting the button end into the Hub

until it locks into position.

Alternate Corner Roof, Side Roof,

Corner Roof...until the Hub is

complete. (illus. 11)

illus. 9

illus.10

illus.11

(G)

(H) (I)

Roof Vent Cover

Drape the Roof Vent Cover over

the Hub positioning the peak over

the center on the Hub.

Lift the corner of the Roof Vent

Cover and pull over the short

end of the Corner Roof Pole to

insert the pole into the underside

corner pocket. Repeat for all

corners. (illus. 12)

Corner Brackets (J)

Insert the Corner Roof pole end into

the end of the Corner Bracket until in

locks into position. (Illus. 13)

Repeat for all Corner Roof Poles.

Planter Hooks (K)

Insert end with pop up button into

open end of the Corner Bracket.

(Illus. 14)

Repeat for all corners.

Canopy

Drape Canopy over Hub assembly.

Pull the corners out over the Corner

Roof Pole, Bracket and Planter

assembly end and insert in corner

pocket on Canopy. (Illus. 13 & 15)

Repeat for all corners.

Underneath, attach hook & loop

fastener to the Roof Vent Cover

mesh. (illus. 15)

(J)

(K) (J) (H)

(H)

(H) (I)

Hook & Loop fastener

illus.12

illus.13

illus.14

illus.15

The Corner Brackets (J) on the

roof assembly will fit over and

around the corner of the frame

assembly. (illus. 16 & 17)

From inside, underneath the roof

assembly, gently lift the Side Roof

Pole (I) and insert the end tab into

the slot in the center of the Dual

Track section. Repeat for each side.

Then secure into position with the

Phillips Head Sheet Metal Screw-

Small. (illus. 16 & 18)

Use the Phillips Head screwdriver

end of the Allen Wrench to insert

the Phillips Head Sheet Metal

Screw – Small, into the opening on

the Planter Hook and attach to the

Column. (illus. 16 & 19)

Repeat for all corners.

On the underside

of the Canopy pull

the elastic down

and hook into the

ridge on the

outside of the Dual

Track frame.

(illus. 16 & 20)

Lift the roof assembly up into position

over the frame.

Requires two or more people.

illus.16

illus.17

illus.18

illus.19

illus. 20

Decorative Plate (L) and Mounting Plate (M)

Lift the Column leg slightly and insert it through Decorative

Plate opening.

Lift the Column leg slightly and insert the Mounting Plate.

Four vertical tabs will go into the Column.

(illus. 21)

Repeat for all Columns and Decorative Plates.

Mounting Plate (M)

Line the holes on the Mounting

Plate tabs up with the pre-drilled

screw holes on the Column.

Secure with 4 Phillips Head

Sheet Metal Screws – Small

(illus. 22)

Repeat for all Columns and

Mounting Plates.

Stake Down

Insert the Stakes through the

4 outer holes.

For more permanent

attachment, you can use

screws or bolts (not included)

instead of the stakes to

secure to a deck or patio.

Repeat for all Mounting

Plates.

illus. 21

illus. 22 illus. 23 illus. 24

(L)

(M)

Decorative Plate cover (L)

Slide the Decorative Plate

down to cover the

Mounting Plate.

Repeat for all Columns.

Inhaltsverzeichnis

Andere Coleman Zelt Handbücher

Coleman

Coleman SUNDOME 9180-121 Bedienungsanleitung

Coleman

Coleman Monterey 6 14'x8' Bedienungsanleitung

Coleman

Coleman SUNDOME 2000002058 Bedienungsanleitung

Coleman

Coleman WEATHERMASTER 6 SCREENED TENT Bedienungsanleitung

Coleman

Coleman VESPUCCI 4 FE Bedienungsanleitung

Coleman

Coleman Cimarron 4 10'x7' Bedienungsanleitung

Coleman

Coleman RONDEAU 2000002816 Handbuch

Coleman

Coleman 2126169 Handbuch

Coleman

Coleman Echo Lake 6p Fast Pitch Handbuch

Coleman

Coleman GALILEO 9276-202 Bedienungsanleitung

Coleman

Coleman Outsider 9261-131 Bedienungsanleitung

Coleman

Coleman MOUNTAINEER DOM 9160-808 Bedienungsanleitung

Coleman

Coleman 2000002250 Bedienungsanleitung

Coleman

Coleman 2000010013 Handbuch

Coleman

Coleman X-CURSION TEPEE/210 Bedienungsanleitung

Coleman

Coleman RANGEVIEW 5 9230-110 Bedienungsanleitung

Coleman

Coleman TIOGA 10 14'x14' Bedienungsanleitung

Coleman

Coleman Weather Master Handbuch

Coleman

Coleman 2000002120 Bedienungsanleitung

Coleman

Coleman Eagle Rock 9277C957 Bedienungsanleitung

Coleman

Coleman 2000010194 Handbuch

Coleman

Coleman MONTANA 14'x7' Bedienungsanleitung

Coleman

Coleman CRESTLINE 9’10”x7’ Bedienungsanleitung

Coleman

Coleman MONTANA 2000001593 Bedienungsanleitung

Beliebte Zelt Handbücher anderer Marken

OZTENT

OZTENT JV SIGNATURE EDITION Bedienungsanleitung

GigaTent

GigaTent Summer Chalet Mini Tent Bedienungsanleitung

ShelterLogic

ShelterLogic 107153 Bedienungsanleitung

Outsunny

Outsunny 84C-230 Bedienungsanleitung

Napier

Napier SPORTZ COVE 61 Series Bedienungsanleitung

EuroTrail

EuroTrail ATLANTIS PRO Bedienungsanleitung

Reimo

Reimo Marina Bedienungsanleitung

TiiTENT

TiiTENT TB300 Bedienungsanleitung

Ozark Trail

Ozark Trail W784.1 Kurzanleitung

SlingFin

SlingFin CrossBow 2 Bedienungsanleitung

Palram

Palram Arizona 5000 Wave - WINGS Bedienungsanleitung

COVERPRO

COVERPRO 56184 Montageanleitung

Vango

Vango Zenith 100 Bedienungsanleitung

Costway

Costway PATIOJOY OP70818 Bedienungsanleitung

Clarke

Clarke PUC 88 Bedienungsanleitung

Crivit Outdoor

Crivit Outdoor 96716 Bedienungsanleitung

Outsunny

Outsunny 84C-063 Bedienungsanleitung

Sojag

Sojag 500-9166781 Bedienungsanleitung