Comau Robotics C5G Betriebsanleitung

Comau Robotics

Instruction Handbook

Control Unit

Standard Version

Maintenance

Help to problem-solving

Preventive maintenance plan to guarantee the C5G functionality over time

Preventive and special maintenance procedures

Spare part list

CR00757598_en-00/0411

The information contained in this manual is the property of COMAU S.p.A.

Reproduction of text and illustrations is not permitted without prior written approval by COMAU S.p.A.

COMAU S.p.A. reserves the right to alter product specifications at any time without notice or obligation.

LB-RC-C5E-MAN_enTOC.fm

00/0000

SUMMARY

1. GENERAL SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...9

Responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Applicability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Operating Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2. MAINTENANCE PRESCRIPTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...19

Precautions before starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Precautions while carrying out maintenance activities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Precautions at the end of the maintenance activities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Maintenance staff. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Equipment and tools necessary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Torque wrench settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3. HELP IN TROUBLE SHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...21

Precautions before starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Methodology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Problem analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Diagnosis messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Identification items and abbreviations for connectors, cables and modules . . . . . . . . . . . . . 25

Traceability for replacement purposes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Replacing the components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Control Unit outline diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Comau Customer Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4. SWITCHING OFF THE POWER SUPPLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...30

Precautions and risks associated to the power supply off-switching . . . . . . . . . . . . . . . . . . . . . 30

Switching off the power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5. HOW TO REACH THE MODULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...34

Precautions before starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Risks associated with the module reaching procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Module location and reaching methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

_LB-RC-C5E-MAN_enTOC.fm

00/0000

Front door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Upper panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

6. HOW TO MOVE THE ROBOT WHEN THE CONTROL UNIT IS DAMAGED . . . . . . ..39

Precautions before starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Risks associated with the Robot handling with Control Unit disconnected . . . . . . . . . . . . . . . . 39

How to use the Brake Release module C5G-OBR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

7. PREVENTIVE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..43

Precautions before starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Equipment and tools required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Preventive maintenance plan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

ACC: door closing and seal efficiency check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

ACO: cleaning the condenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

ACO: emptying the condensate collectiong can . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

E110: fan cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

E111..E114: fan cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

UPS: replacing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

8. SPECIAL MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..56

Precautions before starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Equipment and tools required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Modules subject to special maintenance activities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

ACO: replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

AMS-APC820: module replacement and Compact Flash recovery . . . . . . . . . . . . . . . . . . . . . . 63

AMS-ASM32: module replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

AMS-IAM: module replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

AMS-PPS8: module replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

HMK: replacing the hour-counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

SDM: module replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

UPS: replacing the module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

9. SPARE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..91

Precautions about the spare part usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Where to procure the spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

LB-RC-C5E-MAN_enTOC.fm

00/0000

Spare part list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Spare parts for the C5G basic model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

10. SETTING OUT OF WORK AND DISMANTLING . . . . . . . . . . . . . . . . . . . . . . . . . . . ...97

Precautions before starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Staff to set the plant out of work and dismantle it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Equipment and tools required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Setting out of work and dismantling procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Removing the pile and battery from the Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Preface

HS-RC-C5E-0_01.fm

00/0211

PREFACE

This chapter deals with the following topics:

–Reference documents

–Content of the C5G Control Unit manuals

–Document preservation

–Manual content limits

–Symbols in the manual.

Reference documents

This document refers to the C5G Control Unit.

The complete set of manuals concerning the C5G control units consists of:

Those manuals are to be supplemented by the following documents:

Comau C5G Control Unit – Technical Specification

–Transport and installation

–Maintenance

– Control Unit use

Circuit Diagram – Circuit Diagram (ver. ACC1 and ACC3)

–Circuit Diagram (ver. ACC5)

–Circuit Diagram (ver. PAL)

Comau Robot – Technical Specifications *¹

– Transport and installation *¹

– Maintenance *¹

Programming – PDL2 Programming Language Manual

– VP2 - Visual PDL2

– Motion programming

Applications – According to the required application

type.

*¹ specific for the installed Robot type

The above mentioned manuals shall be preserved in good repair for the entire

Robot System operating life and shall always be available for the staff members

carrying out activities on the Robot System.

Preface

HS-RC-C5E-0_01.fm

00/0211

Content of the C5G Control Unit manuals

Document preservation

All documents forwarded shall be preserved nearby the Robot System and be at the

disposal of all staff members, who carry out activities on the Robot System. Moreover

the documents shall be preserved in good repair for the entire Robot System operating

life.

Manual content limits

The images in the instruction manuals are aimed at representing the product and may

differ from the items actually installed on the Robot System.

Device Manuals Contents

C5G Control

Unit

–Technical

Specification

– Description and main features of the Control Unit

– Guide to Control Unit model selection

– General description about the expanding possibilities in

relation to I/O signals, communication networks and safety

devices

– Description and purchase codes for the Control Unit and its

optionals.

–Transport and

installation

– Information about the preparing activities and

prearrangements required to install the C5G

– Dimensions and weights, transport and lifting methods

– Procedures to adapt the internal components and options for

the powering network

– Procedure to perform the connection to the mains

– Preliminary procedure to set the Control Unit at work

–Maintenance – Help to problem-solving

– Preventive maintenance plan to guarantee the C5G

efficiency over time

– Preventive and special maintenance procedures

– Spare part list

– Wiring diagram

HS-RC-C5E-0_01.fm

00/0211

Symbols in the manual

Find below the symbols highlighting WARNING, CAUTION and NOTES together with

their meaning

This symbol applies to operating procedures, technical information and

precautions that are to be complied with and/or properly performed to prevent

possible injuries.

This symbol applies to operating procedures, technical information and

precautions that are to be complied with and/or properly performed to prevent

possible equipment damages.

This symbol applies to operating procedures, technical information and

precautions that need necessarily to be highlighted.

This symbol concerns the material disposal procedures ruled by the RAEE

Directive.

This symbol reminds the user to avoid polluting the environment and stimulate a

sustainable attitude, i.e. disposing of the materials in the suitable waste collection

sites.

General Safety Precautions

ge-0-0-0_01.FM

00/0710

1. GENERAL SAFETY PRECAUTIONS

This specification deals with the following topics:

–Responsibilities

–Safety Precautions.

1.1 Responsibilities

– The system integrator is responsible for ensuring that the Robot System (Robot

and Control System) are installed and handled in accordance with the Safety

Standards in force in the country where the installation takes place. The application

and use of the protection and safety devices necessary, the issuing of declarations

of conformity and any CE markings of the system are the responsibility of the

Integrator.

– COMAU Robotics & Service shall in no way be held liable for any accidents caused

by incorrect or improper use of the Robot System (Robot and Control System), by

tampering with circuits, components or software, or the use of spare parts that are

not included in the spare parts list.

– The application of these Safety Precautions is the responsibility of the persons

assigned to direct / supervise the activities indicated in the Applicability sectionally

are to make sure that the Authorised Personnel is aware of and scrupulously follow

the precautions contained in this document as well as the Safety Standards in

addition to the Safety Standards in force in the country in which it is installed.

– The non-observance of the Safety Standards could cause injuries to the operators

and damage the Robot System (Robot and Control System).

It deals with a general specification that apply to the whole Robot System. Due to

ist significance, this document is referred to unreservedly in any system

instruction manual.

The installation shall be made by qualified installation Personnel and should

conform to all national and local codes.

General Safety Precautions

ge-0-0-0_01.FM

00/0710

1.2 Safety Precautions

1.2.1 Purpose

These safety precautions are aimed to define the behaviour and rules to be observed

when performing the activities listed in the Applicability section.

1.2.2 Definitions

Robot System (Robot and Control System)

The Robot System is a functional unit consisting of Robot, Control Unit, Programming

terminal and possible options.

Protected Area

The protected area is the zone confined by the safety barriers and to be used for the

installation and operation of the robot

Authorised Personnel

Authorised personnel defines the group of persons who have been trained and assigned

to carry out the activities listed in the Applicability section.

Assigned Personnel

The persons assigned to direct or supervise the activities of the workers referred to in

the paragraph above.

Installation and Putting into Service

The installation is intended as the mechanical, electrical and software integration of the

Robot and Control System in any environment that requires controlled movement of

robot axes, in compliance with the safety requirements of the country where the system

is installed.

Programming Mode

Operating mode under the control of the operator, that excludes automatic operation

and allows the following activities: manual handling of robot axes and programming of

work cycles at low speed, programmed cycle testing at low speed and, when allowed,

at the working speed.

Auto / Remote Automatic Mode

Operating mode in which the robot autonomously executes the programmed cycle at the

work speed, with the operators outside the protected area, with the safety barriers

closed and the safety circuit activated, with local (located outside the protected area) or

remote start/stop.

Maintenance and Repairs

Maintenance and repairs are activities that involve periodical checking and / or

replacement (mechanical, electrical, software) of Robot and Control System parts or

components, and trouble shooting, that terminates when the Robot and Control System

has been reset to its original project functional condition.

Andere Handbücher für C5G

Inhaltsverzeichnis

Andere Comau Robotics Steuereinheit Handbücher

Comau Robotics

Comau Robotics C5G Handbuch

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung