CBT0020 Elite Pro Touch Controller User/Engineer Guide February 2024
Heating Solutions Ltd
5
The thermostat has three program modes: Weekday/Weekend, 7-day and 24-hour
programming. There is also a manual programming option.
• For Weekday/Weekend programming, the four comfort levels are the same for Mon-
Fri but can be different for Sat-Sun.
• For 7-day programming, each day of the week can have four different levels.
• In 24-hour mode, all days are programmed with the same comfort levels.
The thermostat is supplied with factory-programmed comfort levels; these can be
changed easily. The default times and temperature settings are:
07:00 - 21°C (Wake), 9:00 - 16°C (Leave), 16:00 - 21°C (Return), 22:00 - 16°C (Sleep)
Unused levels must be set to --:-- so that the thermostat will skip these and continue to
the next programmed time. To do this, set the time to 00:00 and press UP/DOWN keys.
• Press the EDIT key
• Use the DAY key to select the day/period of the week (the selection will flash)
• Press NEXT to confirm selection
• WAKE will now flash, and the current time and temperature settings will be shown
• Use the UP/DOWN key at the top to set the hours and minutes
• Use the UP/DOWN key in the centre to set the temperature
• Press the RIGHT arrow key
• LEAVE will flash, displaying the current settings
• Repeat these steps above to set all comfort levels
• For any unused periods, set time to --:--
• Press DONE to confirm and save the settings
You can program up to a maximum of 6 levels. Enable this in the feature menu.
The UP/DOWN keys allow you to adjust the set temperature; when either key is pressed,
you will see the SET TEMP and the desired temperature value. Press DONE to confirm
the temperature setting and return to the main display.
Press the UP/DOWN key to cancel this override, then CANCEL.
4. SETTING HEATING TIME AND TEMPERATURE
5. TO PROGRAM THE COMFORT LEVELS
6. TEMPERATURE CONTROL
