Comelit IPSWP22N01A Bedienungsanleitung

SWITCH, 16 (PoE) + 4 UPLINK

GIGABIT PORTS + 2 SFP SLOTS

ART. IPSWP22N01A

Please read this manual thoroughly before use and keep it for future reference

- 1 -

Package contents

Check the contents of your package:

PoE switch x 1

User manual x1

Power cord x 1

Accessories

If any part is lost and damaged, please contact your dealer.

Introduction

The device have 16 (PoE) + 4 Fast uplink 10/100/1000Mbit/s RJ45 ports + 2 SFP slots that increase the speed of your

network server and backbone connections, made Gigabit connection to a server or uplink a network.

The PoE ports automatically detect and power the IEEE 802.3af/at compliant Powered Devices (PD). The power is

transmitted with the data in one single cable.

Hardware description

Front panel

The front panel consists of Ethernet RJ45 ports and the related leds.

LED indications

LED

Color

Function

PWR

Green

OFF: no power supply.

ON: power supply connected.

LNK/ACT

Green

OFF: no device connected to the corresponding port.

ON: the link through the port is successfully established at

1000Mbit/s.

Blink: the switch is sending or receiving data.

Orange

OFF: no device connected to the corresponding port.

ON: the link through the port is successfully established at

10/100Mbit/s.

Blink: the switch is sending or receiving data.

PoE

Orange

OFF: no PoE (PD) connected.

ON: PD successfully connected to the port.

Blink: abnormal PoE supply.

DIPswitch

Default: normal communication between the ports 1~20.

VLAN: 1-16 ports are divided into a single VLAN but can communicate with the ports 17-20.

CCTV: extend the PoE distance up to 250m to expand your network.

Note: after changing the mode, You need to restart the device.

- 2 -

Rear panel

In the rear panel there is an AC inlet power socket, which accepts input from 100 to 240VAC, 50/60HZ.

Power socket

Connect the female connector of the power cord here and the male connector to the AC power outlet. Please make

sure that the voltage meets the requirement of the switch input voltage.

: connect to the ground to prevent lightning strike

Installation

This part describes how to install the switch and make the connections. Please follow the instructions to avoid damages

and security problems.

Before cleaning the switch, unplug the power supply. Do not clean the switch with wet cloth or liquid

Do not place the switch near water or any damp area. Prevent water or moisture from entering into the chassis

Do not place the switch on an unstable place or desk. The switch might be damaged severely in case of fall

Ensure proper ventilation of the equipment and keep the ventilation vents free of obstructions

Make sure that the operating voltage is correct

Do not open the chassis while the switch is powered to avoid electrical shocks

Desktop Installation

Attach the rubber feet provided on the bottom at each corner. Allow adequate space for ventilation between the device

and the objects around it.

Rack-mountable installation

The switch can be installed on an EIA 19-inch rack. Install the mounting brackets on the switch’s side panels (one on

each side), secure them with the included screws, and then use the screws provided with the rack to mount the switch

on the 19-inch rack.

- 3 -

Turn ON the switch

When powered, the switch start automatically, the led lights up.

Note: make sure that the voltage is correct before power ON, otherwise the switch will be damaged.

Specifications

Supported standards

IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af,

IEEE802.3at

Network cables

10BASE-T: UTP category 3,4,5 cable (≤100m)

100BASE-TX: UTP category 5 cable (≤100m)

1000BASE-T: UTP category 5e cable (≤100m)

1000BASE-X: MMF or SMF SFP module

MAC address table

8K, auto-learning, auto-aging

Transfer mode

Store-and-Forward

Frame forward rate

10Base-T: 14881pps/port

100Base-TX: 148810pps/port

1000Base-T/X: 1488095pps/port

Switching capacity

40Gbit/s

Dimensions (L x H x D)

440 x 44 x 207mm

Fan

Power supply

100~240VAC, 50/60Hz

PoE ports

1~16

PoE power on RJ45

Mode A: pin 1/2 (+), pin 3/6 (-)

PoE power output

55VDC/32W (max)/port

PoE power budget

250W

Temperature

Operating: 0°C ~ 40 °C (32 °F ~104°F )

Storage: -40 °C ~ 70 °C (-40 °F ~158°F )

Humidity

Operating: 10% ~ 90% non-condensing

Storage: 5% ~ 90% non-condensing

Inhaltsverzeichnis

Andere Comelit Schalten Handbücher

Comelit

Comelit IPSWP06N100A Bedienungsanleitung

Comelit

Comelit IPSWC160A Bedienungsanleitung

Comelit

Comelit KSW3208LU Bedienungsanleitung

Comelit

Comelit 30001008 Bedienungsanleitung

Comelit

Comelit IPSWN08N01A Bedienungsanleitung

Comelit

Comelit IPSWP06N01A Bedienungsanleitung

Comelit

Comelit 1404 Bedienungsanleitung

Comelit

Comelit IPSWP06N02A Bedienungsanleitung

Comelit

Comelit IPSWP080A Bedienungsanleitung

Comelit

Comelit IPSWP10N01A Bedienungsanleitung

Comelit

Comelit IPSWP050A Bedienungsanleitung

Comelit

Comelit IPSWSP24A Bedienungsanleitung

Comelit

Comelit IX9150 Bedienungsanleitung

Comelit

Comelit IPSWP160A Bedienungsanleitung

Comelit

Comelit IPSWR030A Bedienungsanleitung

Comelit

Comelit Simplebus Color 1224A Bedienungsanleitung

Comelit

Comelit IPSWP08N100A Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch