Heavy Duty Hoist
Model: D
500
PN: 752805 12V DC
752850 12V DC
Introduction
Feature
Lifting capacity:500 kg / 1,102 lb wire rope top layer
Lifting height: 12 m
Lifting speed: 3 M/min
Motor output: 300 W x 50 A at DC12V
Brake: Mechanical ratchet pawl provides instant and failsafe brake
Control: Handheld pendant switch powers the hoist
Unpacking
．Hoist assembly…………………………………………………………… 1 pc
．Control ass’y …………....................................................................... 1 pc
．Pendant switch CPB-161 w/cord 0.75 mm x 3C x 4.4 m……………. 1 pc
．Wire rope 6.35 mm x 12 m.....……………………………………………1 pc
．Weight hook CHW-0005………………………………………………… 1 pc
Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless hoist operation may result in personal injury hazards or property
damage.
Information requesting or parts ordering
Please specify the following information:
．Hoist PN ．Part description
．Serial number ．Replacement part number
．Quantity for each part
Installation
Before using the hoist, make sure all electrical components have no corrosion
or damaged; the environment should be clear and dry.
Wire Rope Replacement
．Feed the end of the wire rope into hole on the
drum and lock it with a set screw securely.
．Make sure the first layer of wire rope is tight and
maintain a freeboard at least 1.5 x rope
diameter.
．Wire rope shall be wound in an under-wound
orientation only.
．To compensate for uneven spooling and the
decrease in line lifting capacity as the drum fills
up, use as short a wire rope as practical.
Wiring Diagram
Attach the black lead firmly to the negative (–)battery terminal and white lead
to the positive (+) battery terminal. The voltage drop for the hoist motor must
not exceed 10% of the nominal voltage of 12V DC.
．Recommended battery: 650 CCAminimum for hoisting
Performance Date
Layer Lifting Load
kg Line Speed
mpm
1st 619 2.4
2nd 553 2.7
3rd 500 3.0
At no load 5.0
