Comeup Walrus 20.0 Bedienungsanleitung

Self-Recovery Winch

Model: Walrus 20.

PN: 282020 282024 24V

Introduction

XFeature

Line pull: 9,072 kg / 20,000 lb wire rope first layer

Wire rope: 12.7 mm × 25 m (1/2"×82′) 6 × 29 - IWRC

Brake: Patented cone brake holds full load

Clutch: Turn the T-handle for rapid wire rope payout

Control: Handheld pendant switch powers the winch

XUnpacking

．Winch assembly……………………………………………………....... 1 pc

．Potted contro box..…………………………………............................. 1 pc

．Remote control………………………………………………………….. 1 pc

．Wire rope with hook…………………………………………………….. 1 pc

．Roller fairlead……………………………………………………………. 1 pc

．Cable Tensioner…………………………………………………………...1 pc

．1.8 m (6′) 2 gauge battery lead……………………………………….. 1 pc

XRead this manual carefully

You should carefully read and understand this manual before operating it.

Careless winch operation may result in personal injury hazards or property

damage.

Installation

Before using the winch, make sure all electrical components have no

corrosion or damaged; the environment should be clear and dry.

XWinch and roller fairlead mountings

xIt is very important that the winch will be

mounted on a flat and hard surface of

mounting channel in order to make sure the

motor, drum and gearbox housing are aligned

correctly.

xRoller fairlead does not mount to the winch

directly.

xThe wire rope shall be wound in an under-wound orientation only.

xEight (8) M12 x 1.75 pitch 8.8 grade w/76 N-m torque setting (maximum)

high tensile steel bolts must be used in order to sustain the loads imposed

on the winch mounting.

xTwo (2) M12 x 1.75 pitch 8.8 grade w/76 N-m torque setting (maximum)

high tensile steel bolts must be used for fastening the roller fairlead into

the mounting channel.

XWiring Diagram

Attach the black lead firmly to the negative (–) battery terminal and red lead

to the positive (+) battery terminal. The voltage drop for the winch motor must

not exceed 10% of the nominal voltage of 24V DC.

XNut fastening for motor & contactor

1. Holding the lower nut on the stub and fastening the upper nut clockwise.

2. The torque setting for nut is 14 N-m/124 lb-in.

Warning

．The winch is not intended to be used in any manner for the movement or

lifting of personnel.

．The rated line pull shown is based on the first layer of rope on the drum.

．The rope winding on the drum shall remain 5 wraps from the drum.

Parts List

Item No. Description Part No. Qty

1 Waterproof motor w/control box 882199 1

2 Tie bar kit 882200 3

3 Motor coupling 882201 1

4 Drum bushing 880048 1

5 Drum kit 882203 1

6 Drum bushing 882204 1

7 Gearbox support rack 882205 1

8 Grounding lead 880009 1

9 Wire rope 881929 1

10 Clevis hook 881996 1

11 1st shaft 882207 1

12 3rd ring gear kit 882208 1

13 3rd stage carrier 882210 1

14 2nd stage carrier 882211 1

15 1st stage carrier 882212 1

16 1st pinion 882213 1

17 Clutch kit 882214 1

18 Gear box kit 882215 1

19 Cone brake disc kit 882216 1

20 Brake clutch base 882217 1

21 Brake cover kit 882423 1

22 Roller fairlead 882218 1

23 Cable tensioner 882219 1

24 Mounting hardware 882371 1

25 Remote control 881671 1

26 Handsaver strap 880026 1

Winch Assembly

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Comeup Winde Handbücher

Comeup

Comeup Blazer M2 Bedienungsanleitung

Comeup

Comeup CWS-80 Bedienungsanleitung

Comeup

Comeup H-2500 Bedienungsanleitung

Comeup

Comeup CWG-30375 Bedienungsanleitung

Comeup

Comeup CWG-10077 Bedienungsanleitung

Comeup

Comeup CP-200 Bedienungsanleitung

Comeup

Comeup CWL-200L Bedienungsanleitung

Comeup

Comeup DH-300 Bedienungsanleitung

Comeup

Comeup CWG-30075 Bedienungsanleitung

Comeup

Comeup Rhino 12 Pro Bedienungsanleitung

Comeup

Comeup CWG-500TH Bedienungsanleitung

Comeup

Comeup Cub3 Bedienungsanleitung

Comeup

Comeup Baby Winch CWS-300 Bedienungsanleitung

Comeup

Comeup CWS-230 Bedienungsanleitung

Comeup

Comeup GTD-2200 Bedienungsanleitung

Comeup

Comeup Seal Gen2 9.5s Bedienungsanleitung

Comeup

Comeup CWS-160 Bedienungsanleitung

Comeup

Comeup Seal Gen2 12.5rs Bedienungsanleitung

Comeup

Comeup CEP-1000-14M Bedienungsanleitung

Comeup

Comeup Seal MadX 8.0s Bedienungsanleitung

Comeup

Comeup CWG-10151 Bedienungsanleitung

Comeup

Comeup DV-3500i Bedienungsanleitung

Comeup

Comeup CWL-80 Bedienungsanleitung

Comeup

Comeup CWG-10151 Bedienungsanleitung

Beliebte Winde Handbücher anderer Marken

WARRIOR

WARRIOR Trojan 40PUS12 Kurzanleitung

SVERO

SVERO 16 Bedienungsanleitung

Warrior Winches

Warrior Winches C10000NH Bedienungsanleitung

Badland Winches

Badland Winches 68146 Bedienungsanleitung

Bush

Bush II Series Bedienungsanleitung

Badland

Badland APEX 5500 Bedienungsanleitung

Quadratec

Quadratec Q9000 Synthetic Handbuch

C-Max

C-Max VIGO Bedienungsanleitung

Orvea

Orvea Italwinch 805 Bedienungsanleitung

Prowinch

Prowinch PWJTHF300 Bedienungsanleitung

Clas Ohlson

Clas Ohlson LD2000-A Bedienungsanleitung

Topex

Topex 97X080 Bedienungsanleitung

Eastbound

Eastbound MotoWinch 1707001 Bedienungsanleitung

Runva

Runva EWD8000 Kurzanleitung

Ingersoll-Rand

Ingersoll-Rand LIFTSTAR FG 1500/CN Series Installationsanleitung

Granit

Granit 11157675 Bedienungsanleitung

TREX

TREX TB75 Bedienungsanleitung

Badland

Badland ZXR 2500 Bedienungsanleitung