Comm Box Interactive Classic Bedienungsanleitung
CommBox Interactive
Classic User Manual
Date: 15-Mar-2016
Table of Contents
1 Preparations 3
1.1 Parts List 3
1.2 Control product 3
1.2.1 • You can control thetouchscreen by using the control buttons on the right side of
the frame. Remote Sensor / Power indicator - 3
1.2.2 Control buttons – 4
1.3 Input/output connection 5
1.3.1 Connector name and description 5
1.3.2 USB Multi media playback format 6
1.4 Remote Controller Button Description 6
1.4.1 Button Description 6
2 Setup 9
2.1 Remote Control Setup 9
2.1.1 Inserting batteries into the remote 9
2.1.2 NOTICE: 9
2.2 Touchscreen Setup 9
2.2.1 Turning on the power 9
2.2.2 Changing language of the menu 9
2.3 10
3 11
3.1 11
3.2 11
4 13
4.1 13
4.2 14
5 17
6 20
Cleaning
Connect to a PC or Laptop
HDMI Connection
VGA Connection
Menu Control
Input selection
User function
Trouble Shooting
Supported Resolutions
+61 2 9975 6001 3
1 Preparations
1.1 Parts List
If these items are missing, contact your dealer or service center:
Power Cable (Option)
Remote Controller
HDMI Cable
AAA 1.5V Battery x 2
Touch USB Cable & Extension cable
1.2 Control product
1.2.1 • You can control thetouchscreen by using the control buttons on
the right side of the frame. Remote Sensor / Power indicator -
Power on Green
Stand-by Red
Power Saving (Eco) Red
Power Saving (Normal) Orange or Red/Green Blinking
4+61 2 9975 6001
1.2.2 Control buttons –
Up When a menu is visible on-screen, this button operates identically to the up-
arrow.
Down When a menu is visible on-screen, this button operates identically to the down-
arrow.
Vol- Press this button to decrease the volume. When a menu is visible on-screen, this
button operates identically to the left-arrow button.
Vol+ Press this button to decrease the volume. When a menu is visible on-screen, this
button operates identically to the right-arrow button.
Source Press this button to open and close source menu.
Menu Press this button to display the on-screen display OSD, or to exit the on-screen
display and return to the previous one.
Power Turns the power on/off.
+61 2 9975 6001 5
1.3 Input/output connection
1.3.1 Connector name and description
No.
Connector Description
Earphone To connect audio output
SPDIF To connect SPDIF
Composite To connect composite for DVD etc.
Audio In To connect audio input (3.5)
VGA In To connect VGA video input
Component To connect component for DVD etc.
HDMI 3 In To connect HDMI 1.4 video & audio input - 3
6+61 2 9975 6001
HDMI 2 In To connect HDMI 1.4 video & audio input - 2
HDMI 1 In To connect HDMI 1.4 video & audio input – 1
USB In To connect with USB device
Audio Out To connect audio output
Touch In To connect Touch
RS-232C In To connect RS232 input cable with control device (D-sub 9pin)
Power Input Power connector (AC 100-240V, 50/60Hz)
1.3.2 USB Multi media playback format
Media File Ext. Detail
Music WMA, MP3,M4A, AAC .wma, .mp3, .m4a
Photo JPG, BMP, PNG .jpg, .bmp, .png
Movie MPEG1, MPEG2, MPEG4, H264, RM,
RMVB, MOV, MJEPG, VC1, Divx, FLV .avi, .mpg, .dat, .vob, .div, .mov, .mkv, .
rm, .rmvb, .mp4, .mjpeg, .ts,
.trp, .wmv, .asf, .flv
TXT .TXT
NOTE
• If the product does not operate even though the power is connected, check the power
switch on the touchscreen is turned on.
1.4 Remote Controller Button Description
1.4.1 Button Description
+61 2 9975 6001 7
POWER Power on/off button
SOURCE Select input signal
ASPECT Adjust the window's ratio
Move to the upper menu
Move to the lower menu
Move to the left menu
Move to the right menu
OK Select to change menu
MENU Display or hide menu on the screen
+Volume up
-Volume down
+61 2 9975 6001
8
1. a.
b.
c.
d.
2 Setup
2.1 Remote Control Setup
2.1.1 Inserting batteries into the remote
• Press the tab on the battery case and open it.
• Insert the battery (1.5V AAA) into the battery case.
• Replace the battery case and push it down until clack sounds.
2.1.2 NOTICE:
• When loading the battery, check if the polarity of the batteries is correct.
• If you are not using the remote for long time, remove the batteries to prevent damage
caused by leaking battery fluid.
• Don't expose the battery to direct sunlight or excessive heat such as a fire.
• If anything obstructs the front of the IR receiver the remote may not work.
2.2 Touchscreen Setup
2.2.1 Turning on the power
1. Connect the power cable of the product into outlet with AC 100-240V 50 / 60Hz.
2. Turn on the main AC power switch.
3. If the power indicator is green, the screen turns on automatically.
4. If the power light is red not green, press the power button on the remote or on the bottom
right hand side of the touchscreen to turn on the power.
2.2.2 Changing language of the menu
• The menu's language is set to English as the default.
• Users can select alternative languages if required.
• To change the menu language,
Press the Menu button to open the menu.
Select Setup from the main menu.
Select Language of the Setup menu..
Scroll to the language you want to select and click OK, and then exit the menu.
9
+61 2 9975 6001
2.3 Cleaning
After disconnecting the power cable, clean the product screen lightly with a dry and soft
cloth.
Do not clean the product with a wet cloth or spray.
If washed with any cleaning agent including brighteners, abrasives, waxes, benzene,
alcohol, solvent or surface active agent, the surface of the product may be damaged.
If cleaning inside the product is required, please contact your dealer or service center.
+61 2 9975 6001
10
3 Connect to a PC or Laptop
3.1 HDMI Connection
HDMI input is recommended because it receives a digital signal input from an external
device with HDMI output to ensure high quality of digital signal.
Use the cable provided with the product. Otherwise, no image may be shown on the screen
or normal display may not be shown.
If connecting the product to the PC, it supports the VESA Display Data Channel (DDC)
standard. This standard supports "plug and play" function which helps the PC recognize the
product automatically to output the optimal resolution.
In order to operate the 'plug and play' after connecting the product, connect the video cable
of the PC to the product before turning on your PC, and turn on the power of this product
first and then turn on the power of the PC.
When the incompatible resolution of the input signal is input to the product no image is
shown on the screen or normal display is not shown.
For touch functionality to work you are also required to connect the Touchscreen's USB
Cable to the laptop you will be using with the touch system.
3.2 VGA Connection
To see the video, connect D-Sub 15P cable of the PC to the VGA In port of the product. For
VGA or DVI, you will also need to connect audio output to PC Audio.
If connecting the product to the PC, it supports the VESA Display Data Channel (DDC)
standard. This standard supports "plug and play" function which helps the PC recognize the
product automatically to output the optimal resolution.
In order to operate the 'plug and play' after connecting the product, connect the video cable
of the PC to the product before turning on your PC, and turn on the power of this product
first and then turn on the power of the PC.
When the incompatible resolution of the input signal is input to the product no image is
shown on the screen or normal display is not shown. For touch functionality to work you are
also required to connect the Touchscreen's USB Cable to the laptop you will be using with
the touch system
Andere Handbücher für Interactive Classic
1
Inhaltsverzeichnis
Andere Comm Box Monitor Handbücher
