Comm-Tec DaisyNET II Bedienungsanleitung
Version: V1.0.6
DaisyNET II
User Manual
Important Safety Instructions
1. Do not expose this apparatus
to rain, moisture, dripping or
splashing and that no objects
filled with liquids, such as vases,
shall be placed on the apparatus.
6. Clean this apparatus
only with dry cloth.
2. Do not install or place this unit
in a bookcase, built-in cabinet or
in another confined space.
Ensure the unit is well ventilated.
3. To prevent risk of electric
shock or fire hazard due to
overheating, do not obstruct
the unit’s ventilation openings
with newspapers, tablecloths,
curtains, and similar items.
4. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
5. Do not place sources of naked
flames, such as lighted candles,
on the unit.
7. Unplug this apparatus
during lightning storms or
when unused for long
periods of time.
8. Protect the power cord
from being walked on or
pinched particularly at
plugs.
9. Only use attachments /
accessories specified by
the manufacturer.
10. Refer all servicing to
qualified service
personnel.
1
Warnings of FCC
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
2
Table of Contents
Introduction ...............................................................................................3
Overview .............................................................................................3
Features...............................................................................................4
Package Contents ................................................................................5
Specifications ......................................................................................6
Panel Layout......................................................................................11
Quick Start................................................................................................14
Connections and Installation....................................................................18
Application Diagram.................................................................................20
Web Control .............................................................................................22
Status.................................................................................................23
Configuration.....................................................................................25
Advanced...........................................................................................34
Device List Window............................................................................39
EDID Management ...................................................................................40
Warranty Terms and Conditions.................................................................1
3
Introduction
Overview
DaisyNET II is a 100m 4K Daisy-chain Presenter with HDBaseT in
and HDBaseT out, and utilizes HDBaseT technology as
daisy-chain medium to cascade multiple A/V sources, displays or
any devices with HDBaseT connection together in a chain to set
up an A/V distribution system.
DaisyNET II supports three video inputs including HDMI, Display
Port and VGA plus 3.5mm audio in, with HDBaseT input and
HDBaseT output for cascading. A local HDMI out with audio
de-embedder is provided in the rear side to connect local monitor
or zone displays. It has a 2-Port Ethernet Switch built-in so that
Ethernet could pass through over HDBaseT for LAN control, or to
feed LAN access to sources or displays. RS232 port is used to
pass through RS232 commands or control display device. USB
charger is also provided to charge mobile devices. It offers
ShowME button and Contact Closure to switch sources, and
rotary switch for EDID management.
DaisyNET II offers a future-ready Ultra HD A/V switching and
distribution solution, and cutting-edge HDMI 2.0 and HDCP 2.2
compatibility. With user-friendly WEB GUI and Telnet API to
configure advanced functionality including CEC controller, RS232
controller and Daisy-chain Grouping, it is perfectly suitable for
collaboration or presentation in conference and education
application.
4
Features
HDMI, DisplayPort and VGA plus stereo switching inputs,
local HDMI bypass out with audio de-embedder
HDBaseT input and output to cascade multiple A/V sources
and displays
HDMI 2.0 and input supports HDCP 2.2
Supports 4K@60Hz 4:2:0 8-bit up to 70m over Cat5e/Cat6, or
up to 100m over Cat6a/Cat7
Built in CEC controller and RS232 controller for smart control
Automatic CEC and RS232 command to Power ON/Standby
Display, by detecting input signal status
Daisy-chain Grouping mode offered to match flexible
application
LAN control with user-friendly WEB GUI and Telnet API
ShowMe and Contact Closure for source switching
Built in 2-Port Ethernet Switch for LAN control or LAN access
Built in USB Charger up to 5V/1.5Ato charge mobile devices
Independent rotary switch for EDID management
Advanced signal re-locking and cable equalization for
multiple daisy-chains
5
Package Contents
1 x DaisyNET II
1 x Power Supply (DC 12V 3A)
2 x Phoenix Male Connector (3 Pin 3.5mm)
2 x Phoenix Male Connector (4 Pin 3.5mm)
2 x Phoenix Male Connector (2 Pin 3.5mm)
1 x Mounting Brackets (Pair)
6
Specifications
Video
Input
1 x HDMI IN, 1 x DisplayPort IN,
1 x VGA IN, 1 x HDBaseT IN
Input Signal Type
HDMI: HDMI 2.0 w/HDCP 2.2,
DP: DP 1.2 w/HDCP2.2
Input Resolution
Support
HDMI:
4096 x 2160@24/25/30/50/60Hz,
3840 x 2160@24/25/30/50/60Hz,
1080p@24/25/30/50/60Hz,
1080i@50/60Hz, 720p@50/60Hz,
1920 x 1200@60Hz,
1680 x 1050@60Hz,
1600 x1200@60Hz, 1600 x 900@60Hz,
1440 x 900@60Hz, 1400 x 1050@60Hz,
1366 x 768@60Hz, 1360 x 768@60Hz,
1280 x 1024@60H, 1280 x 960@60Hz,
1280 x 800@60Hz, 1280 x 768@60Hz,
1024 x 768@60Hz, 800 x 600@60Hz
DisplayPort:
800x600@60 Hz, 1024x768@60Hz ,
1280x768@60Hz, 1280x800@60Hz,
1280x960@60Hz, 1280x1024@60Hz,
1360x768@60Hz, 1366x768@60Hz,
1440 x900@60Hz, 1600 x900@60Hz,
1600 x1200@60Hz,
1680 x1050@60Hz,
1920 x1080@60Hz,
7
1920 x1200@60Hz,
1280x720P@50Hz, 1280x720P@60Hz,
1920x1080P@50Hz,
3840x2160@50Hz, 3840x2160@60Hz,
4096x2160@50Hz, 4096x2160@60Hz.
VGA:
800x600@60 Hz, 1024x768@60Hz ,
1280x768@60Hz, 1280x800@60Hz,
1280x960@60Hz, 1280x1024@60Hz,
1360x768@60Hz, 1366x768@60Hz,
1440 x900@60Hz, 1600 x900@60Hz,
1600 x1200@60Hz,
1680 x1050@60Hz,
1920 x1080@60Hz,
1920 x1200@60Hz,
1280x720P@50Hz, 1280x720P@60Hz,
1920x1080P@50Hz,
Output
1 x HDMI OUT, 1x HDBaseT OUT
Output Signal Type
HDMI 2.0 with 4k, HDBaseT
Output Resolution
Support
HDMI:
4096 x 2160@24/25/30/50/60Hz,
3840 x 2160@24/25/30/50/60Hz,
1080p@24/25/30/50/60Hz,
1080i@50/60Hz, 720p@50/60Hz,
1920 x 1200@60Hz,
1680 x 1050@60Hz,
1600 x 1200@60Hz,
1600 x 900@60Hz, 1440 x 900@60Hz,
1400 x 1050@60Hz, 1366 x 768@60Hz,
8
1360 x 768@60Hz,
1280 x 1024@60H, 1280 x 960@60Hz,
1280 x 800@60Hz, 1280 x 768@60Hz,
1024 x 768@60Hz, 800 x 600@60Hz
DisplayPort:
800x600@60 Hz, 1024x768@60Hz ,
1280x768@60Hz, 1280x800@60Hz,
1280x960@60Hz, 1280x1024@60Hz,
1360x768@60Hz, 1366x768@60Hz,
1440 x900@60Hz, 1600 x900@60Hz,
1600 x1200@60Hz,
1680 x1050@60Hz,
1920 x1080@60Hz,
1920 x1200@60Hz,
1280x720P@50Hz, 1280x720P@60Hz,
1920x1080P@50Hz,
1920x1080P@60Hz,
3840x2160@50Hz, 3840x2160@60Hz,
4096x2160@50Hz, 4096x2160@60Hz.
VGA:
800x600@60 Hz, 1024x768@60Hz ,
1280x768@60Hz, 1280x800@60Hz,
1280x960@60Hz, 1280x1024@60Hz,
1360x768@60Hz, 1366x768@60Hz,
1440 x900@60Hz, 1600 x900@60Hz,
1600 x1200@60Hz,
1680 x1050@60Hz,
1920 x1080@60Hz,
Andere Handbücher für DaisyNET II
3
Inhaltsverzeichnis
Andere Comm-Tec Extender Handbücher
