Commax TP-1L Bedienungsanleitung
DOOR PHONE TP-1L
User Manual
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
1
1. Introduction .....................................................2
2. Important Safeguards .....................................3
3. Overview.........................................................4
4. Operation .......................................................5
5. Connection .....................................................6
6. Wiring..............................................................7
7. Specifications..................................................8
Contents
2
Your unit is designed so it can be flush mounted on the or used. When flush mounted on the wall, the stand permils you to the
unit for an gular of unit view. The model number is located on the bottom and record the serial number in the space provided
below(available). Refer to these numbers whenever you call upon your COMMAX dealer regarding this product.
Model No. Serial No.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
This symbol is intended to alert the use to the presence of uninsulated
“
“dangerous Voltage”
”
within the product’s enclose that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the use to the presence of important operating and maintemance(servicing) instructions in the
literature accompanying the appliance
1. Introduction
CAUTION : To reduce the risk of electric shock, do not remove cover(or back) no user-serviceable
part inside refer servicing to qualified service personnel
caution
Risk of electric shock
do not open
3
▲
Damage Requiring Service: This equipment from the power source and source and refer servicing to qualified service per-
sonnel under the following conditions:
ⓐwhen the power is damaged.
ⓑif liquid has been spilled or objects have fallen into the unit
ⓒif the equipment has been exposed to rain or water.
ⓓif the equipment has been dropped or otherwise damaged.
ⓔwhen the equipment exhibits a distinct change in performance- this indicates a need for service.
▲
Water and Moisture: Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
▲
Accessories: The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Any
mounting of the manufacture’s instructions, and should use a mounting accessory recommended by the manu-
facturer.
▲
Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
▲
Lightning: For added protection for this product before a lightning storm, or when it is left un attached and un used for long
periods of time, unplug it from the wall outlt and disconnect the other system. This will prevent damage to the prod-
uct due to lightning and power-line surges. If you live in an area heavily prone to lightning storms, it is recom-
mended that you invest in power-line, telephone-line, RFcable and actuator/ polarization surge protectors to protect
your appliance system from possible damage
2. Important Safeguards
4
3. Overview
Controls and functions
①Volume Switch
②Handset
③Call Button
④Handset Cord
5
1. Depress the battery lid to open and install 4 standard AA type 1.5V batteries by connect-
ing the snap-on lead to the battery terminals.
2. When you want to talk with the other party, raise the handset and press the call button,
this sends a call tone to the other station.
3. When the bell is ringing, raise the handset and speak with the other party like telephone.
4. On completion of the conversation, replace the handset.
NOTE :
1) Can control the sound of bell rings by use volume switch. As example, you may setting on
the volume switch at “L” position, volume is low but setting at “H” position, volume is high-
er.
2) If you don't want to use dry battery, you can use 6V DC adaptor(over than 200mA) as an
alternative.
3) On completion of the conversation, power is automatically cut off when the handset is
replaced in the cradle; always ensure that the handset is properly located to avoid exces-
sive battery drain.
4.
Operation
6
5. Connection
7
6. Wiring
The unit may also be used with 6VDC power supply.
It is required to use Voltage Regulation DC Power Supply for safety operation.
⇧
Intercom
⇧
Battery
⇧
Power Supply
8
7. Specifications
Operating voltage 6V
Output 0.2W at 8Ω
Idling current 10 mA
Maximum current 40 mA
Effective distance 2Km(O.65mm) /1 .25miles(22 AWG)
Dimensions 98(W) x 208(D) x 65(H)mm
Printed In Korea / 2013.07.105
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133
Web site : www.commax.com
Andere Handbücher für TP-1L
1
Inhaltsverzeichnis
Andere Commax Gegensprechanlage Handbücher
Commax
Commax CDV-70U Bedienungsanleitung
Commax
Commax DP-2T Bedienungsanleitung
Commax
Commax DP-LA01M Bedienungsanleitung
Commax
Commax DR-2PN Bedienungsanleitung
Commax
Commax CIOT-700M Bedienungsanleitung
Commax
Commax CDV-50P Bedienungsanleitung
Commax
Commax WDC-244L Bedienungsanleitung
Commax
Commax CAV-40NG Bedienungsanleitung
Commax
Commax DP-2S Bedienungsanleitung
Commax
Commax DRC-703S Bedienungsanleitung
Commax
Commax CDV-704MA Bedienungsanleitung
Commax
Commax CDV-40QM Bedienungsanleitung
Commax
Commax CDV-50A Bedienungsanleitung
Commax
Commax CDV-73BE Bedienungsanleitung
Commax
Commax CDV-70P Bedienungsanleitung
Commax
Commax CMV-70MX Bedienungsanleitung
Commax
Commax CMV-70M Bedienungsanleitung
Commax
Commax DRC-40CK Bedienungsanleitung
Commax
Commax CDV-35U Bedienungsanleitung
Commax
Commax DR-3PK Bedienungsanleitung
