Commax CDV-70MH(M) Bedienungsanleitung
Printed In Korea / 2016.07.104
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
PM0770NM0010
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
Fineview Video Phone CDV-70MHM
User Manual
2
Table of Contents
Please follow the things described below in order to prevent any danger or
property damage.
1. Warnings and caution
Warning
Caution
Prohibition.
No disassembly
No touch
Must follow strictly.
Shows plugging out the power cord
without an exception
Shows the warning and caution for an electricshock.
Shows the warning and caution for a fire.
It may cause a serious damage or
injury if violated.
It may cause a minor damage or
injury if violated.
Please don’t disassemble,
repair or rebuild this product
arbitrarily (please contact the
service center if a repair is
needed.
·It may cause an electric
shock or fire.
When cleaning the product,
please rub it with a soft and
dry cloth after plugging out
the power cable. (Please don’t
use any chemical products
such as wax, benzene, alcohol
or cleanser.)
If an abnormal sound, burning
smell or smoke is coming out
of the product, please plug out
the power cable and contact a
service center.
·It may cause an electric
shock or fire.
Please don’t insert any
metallic or burnable materials
into the ventilation hole.
·It may cause an electric
shock or fire.
Cleaning & Use
Warning &
Caution
1. Warnings and caution ···············································2
2. Parts Names ··························································3
3. Package Contents ···················································4
4. Wiring and Connection Instructions ······························4
5. Operation ······························································5
6. Start Menu ·····························································7
7. Installation ··························································· 17
8. Specications and Features······································ 18
9. Safe Operation guide·············································· 18
3
Power & Installation
Please don’t use several
products at the same time on
one power socket.
·It may cause a fire due to an
abnormal overheating.
Please don’t bend the power
cable excessively or it may
cause an electric shock.
·fire when using a damaged
power cable.
Please don’t handle the power
cable with a wet hand.
·It may cause an electric
shock.
Please plug out the power
cable from the socket when
not using it for a long period
of time.
·It may shorten the product
lifespan or cause a fire.
Please don’t install the
product in the place where
there is much oil, smoke or
humidity.
·It may cause an electric
shock or fire.
Please don’t install the
product with the lightening
and thunder.
·It may cause an electric
shock or fire.
Please don’t use and connect
this product with other
products with different rated
voltage
·It may cause a disorder or
fire.
When installing the product
that generates heat, please
install the product away from
the wall (10cm) for the
ventilation.
·It may cause a fire due to
the increased internal
temperature.
Warning &
Caution
Parts Names
2.
①HANDSET
⑤INTERPHONE BUTTON
②TFT-LCD
⑥DOOR OPEN BUTTON
③POWER LED
④MONITORING BUTTON
⑦MENU BUTTON
⑧POWER SWITCH
➈MICRO SD-CARD SLOT
4. Wiring and Connection Instructions
User Manual (1EA)
Connector (2EA)
Wall bracket mounting
screw (4EA)
Monitor fixing
screw (1EA)
Wall bracket
for monitor (1EA)
3. Package Contents
4
1. Red: Talk (Audio)
2. Blue: GND
3. Yellow: Power (+12V)
4. White: Video
▷Polarity of the camera connector
1. Red: Talk (Audio)
2. Blue: GND
3. Yellow: Power (+14V)
4. White: Call signal
▷Polarity of interphone connector
Each device should be connected by
separated cables.
If you use UTP CABLE[CAT.5] for
CAMERA1and CAMERA2, 2 lines of
UTP cable are required.
If you use UTP CABLE[CAT.5], connect
4 lines between monitor and interphone.
the rest 4 lines to GND after connecting
If you use UTP CABLE[CAT.5], connect
the rest 4 lines to GND after connecting
4 lines between monitor and interphone.
DOOR CAMERA & INTERPHONE Wiring
Dialog between the interphone and camera is possible only when the visitor's image is visible on the monitor screen.
A three-way
conversation can take
place if the monitor or
interphone is
picked up
simultaneously
A chime rings
simultaneously
from both the
monitor and
interphone
Hang-up the
handset
Open the door
End the dialog
Dialog begins
A visitor
calls from
the entrance
1. Calling of visitor
2. Communication with the optional Interphone
5. Operation
※ Caution : When you are holding the handset while the hook switch is off and someone may push
the button of camera, you may lose your hearing because of high volume of calling sound.
The visitor
presses the
call button on
the camera
A chime
sounds
To
check
The visitor’s
image appears
on the monitor
Hang-up the
handset
Ends the call
A view of the front door can be seen anytime the
monitoring button is pressed and a dialog can be
made with anyone at the front door.
Dialog duration
60 seconds at
atime
Open the door
The door release function
operates only when the visitor’s
image is displayed on the screen
Dialog begins
The display will be shown up
for 60 seconds and turned off
automatically
3. Parts Names
①HANDSET
⑤INTERPHONE BUTTON
②TFT-LCD
⑥DOOR OPEN BUTTON
③POWER LED
④MONITORING BUTTON
1. Red: Talk (Audio)
2. Blue: GND
3. Yellow: Power (+12V)
4. White: Video
▷Polarity of the camera connector
1. Red: Talk (Audio)
2. Blue: GND
3. Yellow: Power (+14V)
4. White: Call signal
▷Polarity of interphone connector
5. Wiring and Connection Instructions
User Manual (1EA)
Connector
CDV-43KM (1EA)
CDV-43KM2 (2EA)
Wall bracket mounting
screw (4EA)
Monitor fixing
screw (1EA)
Wall bracket
for monitor (1EA)
4
4. Package Contents
⑦MENU BUTTON
⑧POWER SWITCH
[ CDV-70NM ] [ CDV-70NM2 ]
MICRO SD-CARD SLOT
➈
4 5
* Call from the entrance
* Conversation with monitor
Dialog begins
Pick-up the
handset
Press
the call
button
"Tu-Tu-Tu"
Sound
Hang-up
the handset
End the
dialog
6
4.
GUI Description
3.. Monitoring : function to see the image of visitor in the entrance.
(stand-by mode) Operation
- By pressing the Monitoring button repeatedly, the monitor will work as following in order.
Camera 1 ( Camera 2 ) OFF Camera 1 ............
(On talking mode)Operation
- By pressing Monitoring button repeatedly, the monitor will work as following in order.
Camera1 ( Camera 2 ) Camera 1 ( Camera 2 ) ............
- During the call, User can record the images displaying on LCD monitor by pushing the
‘Menu’ button.
- Recorded images are defined two types, first as 'STILL IMAGE' and second as ‘VIDEO’
by SAVING TYPE.
- During recording ‘VIDEO’, User can stop recording by pushing the ‘Menu’ button.
Caution 1)
When there is no space left for recording ‘STILL IMAGE' or 'VIDEO’ inside of SD card
: The icon ‘FULL’ will be displayed on LCD monitor.
Then CDV-70MHM will be automatically deleting the oldest VIDEO(STILL IMAGE) and
saving the newest VIDEO(STILL IMAGE) instead.
Caution 2)
When there is no SD card inserted
: The icon’No SD’ will be displayed on LCD monitor.
STILL IMAGE can be saved in embedded memory. VIDEO can not saved in
embedded memory. Once SD card is inserted, then STILL IMAGE or VIDEO
can be saved.
6
6. Start Menu
6
4.
GUI Description
3 ..
(stand-by mode) Operation
- By pressing the Monitor button repeatedly, the monitor will work as following in order.
Camera 1 ( Camera 2 ) OFF Camera 1 ............
(On talking mode)Operation
- By pressing Monitor button repeatedly, the monitor will work as following in order.
Camera1 ( Camera 2 ) Camera 1 ( Camera 2 ) ............
Monitoring : function to see the image of visitor in the entrance.
: User can start Main Menu by touching Menu button from Standby mode in LCD
monitor.
: Main Menu consists of two features, first 'VISITOR' and second ‘CONFIG’
User can finish Main Menu by touching Menu button and LCD monot or will go back to
Standby mode.
(1) ‘VISITOR’
User can execute ‘VISITOR’ Menu by touching Interphone button
(2)’CONFIG’
User can execute ‘CONFIG’Menu by touching Open button
( User can go back to Stanby mode by touching Menu button. )
6-1. CHECKING VISITOR
User can see below image in LCD monitor by selecting the icon .
(1) Icon description
: Move(Monitoring button) – Move to left
: Move (Door open button) - Move to right
6 7
: Select (Interphone button) – Execute
: Previous (Menu button) – Go back to Main Menu
(2) ‘VIDEO’: User can check ‘VIDEO’.
(3) ‘STILL IMAGE’: User can check ‘STILL IMAGE’.
6-1-1 Recorded image checking
User can choose ‘CHECKING VISITOR’ Menu. User can choose then ‘VIDEO’ or ‘STILL
IMAGE’ based on need. Then User can see recorded image
< Recorded image display>
(1) Icon description
: Go back to previous image
- User can go back to previous image in’VIDEO’ or ‘STILL IMAGE’
: Move to next image – User can move to next image.
: Delete – User can see Pop-up image displaying ‘Delete’ current image
displayed.
( When deleting current images, User can select YES/NO by touching the buttons
, , , accordingly. )
: Previous – User can go back to ‘CHECKING VISITOR’
8
6-2. CONFIG
User can see below image in LCD monitor by selecting the icon in Main Menu.
(1) Icon descripton
:
Move to left
- User can select TIME, SETTING, LANGUAGE, DISPLAY based on ned
.
:
Move to right - User can select TIME, DISPLAY, LANGUAGE, SETTING based on need
.
: Select - User can select any feature. Then move to selected feature.
: Previous – Go back to Main Menu
(2) ‘TIME’: User can adjust time.
(3) ‘DISPLAY’: User can adjust display.
(4) ‘LANGUAGE’: User can select language.
(5)
‘
SETTING
’: User can select saving type, saving method, volume change, and
initialization
.
6-2-1. TIME SETTING
User can see below image in LCD monitor by moving and selecting the right icon ‘TIME’
in CONFIG.
8 9
(1) Icon decription
: Move to left – Move from YEAR, MINUTE, HOUR, DAY and lastly MONTH.
(Move from right after YEAR)
: Move to right – Move from YEAR, MONTH, DAY, HOUR and lastly MINUTE.
(Move from left after YEAR)
: Select – Select to feature to change. When selecting, the feature will be blinking.
Decrease (Monitoring button) / Increase (Door open button)
( After adjustment, complete theset with button. )
: Previous – User can go back to ‘CONFIG’.
6-2-2. DISPLAY SETTING
User can see below image in LCD monitor by moving and selecting the right icon
‘DISPLAY’ in CONFIG.
(1) Icon description
: Move to left - Move from Brightness, Color, Contrast.
(Move from right after Brightness)
: Move to right - Move from Brightness, Contrast, Color.
(Move from left after Brightness)
10
Andere Handbücher für CDV-70MH(M)
1
Inhaltsverzeichnis
Andere Commax Telefon Handbücher
Commax
Commax AP-2SAG Bedienungsanleitung
Commax
Commax Fineview CDV-70N Bedienungsanleitung
Commax
Commax TP-12RM Bedienungsanleitung
Commax
Commax Fineview CDV-70N2 Bedienungsanleitung
Commax
Commax Fineview CDV-70HM2 Bedienungsanleitung
Commax
Commax CIOT-1020M Bedienungsanleitung
Commax
Commax DRC-701LC/RF1 Bedienungsanleitung
Commax
Commax CAV-43T2 Bedienungsanleitung
Commax
Commax TP-12AM Bedienungsanleitung
Commax
Commax DRC-40BS Bedienungsanleitung
