GE 800 2. Additional Components
1.1/1209 7
2. Additional Components
General
Additionally to the Intercom Server for Start up of the system the following components are required:
1. Subscriber Cards
Subscriber cards handle the speech communication as well as subscriber specific functions. For
connection of IP-, Digital- and Analogue subscribers various cards in 4 feature level (B, C, D and P)
are available. The cards of the higher levels contain all the features of the lower ones plus additio-
nal features. With feature level P individual feature levels can be advised to each subscriber.
2. VoIP-Cards
Due to the support of wide spread standards such as the SIP or IAX protocol various VoIP telepho-
nes or entire VoIP telephone systems can be connected to the Intercom system as subscribers with
VoIP cards.
3. Input / Output Cards
Input / output cards are used for the reading in of floating contacts and / or operating of controls
such as door openers or barriers via floating relay contacts (depending on type
controls such as door openers or barriers via floating relay contacts (depending on type).
4. Interface Cards
For integration and connection of external systems such as telephones, PCs, mobile radios, etc.
5. Connection / Network Cards
For connection / networking of Intercom Servers via LAN/WAN (TCP/IP), 2-wire lines, ISDN, multi-
plexer/ mediaconverter or the public telephone network. Connection: restricted features. Networ-
king: full range of features, centrals operate as though in one location.
6. Installation Boards
For connection of the plug-in cards with the Intercom Terminals, Interfaces, Inputs, Outputs...
7. Licenses
With licenses the functionality of the Intercom Server and the plug-in cards can be expanded.
These components must be ordered separately according to customer requirements.
Please make sure all required components are at hand before beginning with assembly.
