Comnet NetWave NW7 Bedienungsanleitung
INSTALLATION AND OPERATION MANUAL
ENVIRONMENTALLY HARDENED
HIGH THROUGHPUT 802.11A/N WIRELESS ETHERNET DEVICE
Thank you for purchasing NetWave® from ComNet. This installation guide applies to
the following models:
NW7: Individual Hardened Single Radio, Two Gb Ethernet Ports, One internal 19dBi
17° beamwidth directional antenna, Includes power injection module, power
supply and mounting assembly, Port 1 Supports 802.3af/at PD PoE Power, Port
2 provides IEEE802.3at PSE PoE Power, FCC certified for use in the NA Region.
NW7E: Individual Hardened Single Radio, Two Gb Ethernet Ports, One internal 19dBi
17° beamwidth directional antenna, Includes power injection module, power
supply and mounting assembly, Port 1 Supports 802.3af/at PD PoE Power, Port
2 provides IEEE802.3at PSE PoE Power, ETSI certified for use in the EU Region.
The NetWave® NW7[E] environmentally hardened high throughput (HT) wireless
Ethernet transmission device can be configured through the embedded User Interface
as a Client or as an Access Point. This single radio model was designed for high
throughput point-to-point or multi-point applications and comes with an integrated
19dBi, 17° beamwidth antenna. The NW7[E] supports up to 240Mbps throughput using
MIMO technology. The units can be powered by an 802.3af/at PoE Compliant device or
through a supplied power injection module with the second Ethernet port serving as an
IEEE802.3at power source. The NW7 is FCC certified for use in North America and the
NW7E is ETSI, DFS and TPC certified for use in the European Union.
This manual serves the following
ComNet Model Numbers:
NW7
NW7E
INS_NW7[E]_REV– 06/10/13 PAGE 2
INSTALLATION AND OPERATION MANUAL NW7/NW7E
TECH SUPPORT: 1.888.678.9427
About This Guide
This guide is intended for different users such as engineers, integrators, developers, IT managers,
and technicians.
It assumes that users have some PC competence and are familiar with Microsoft Windows
operating systems and web browsers such as Windows Internet Explorer and Mozilla Firefox, as
well as have knowledge of the following:
»Installation of electronic equipment
»Electrical regulations and guidelines
»Knowledge of Local Area Network technology
Related Documentation
The following documentation is also available:
»NW7/NW7E Datasheets
»NW7/NW7E Quick Start Guides
Website
For information on ComNet’s entire product line, please visit the ComNet website at
http://www.comnet.net
Support
For any questions or technical assistance, please contact your sales person (sales@comnet.net) or
the customer service support center (techsupport@comnet.net)
Safety
»Only ComNet service personnel can service the equipment. Please contact ComNet Technical
Support.
»The equipment should be installed in locations with controlled access, or other means of
security, and controlled by persons of authority.
INS_NW7[E]_REV– 06/10/13 PAGE 3
INSTALLATION AND OPERATION MANUAL NW7/NW7E
TECH SUPPORT: 1.888.678.9427
Contents
About This Guide 2
Related Documentation 2
Website 2
Safety 2
Overview 4
Legal Information 4
1.0 Introduction 5
2.0 Point to Multi-Point – NW7 and NW7E 6
3.0 Point-to-Point Systems – NW7 and NW7E 7
4.0 PoE Pass-through Port – NW7 and NW7E 8
5.0 Cabling Requirements 9
6.0 Hardware Installation 10
6.1 NW7 and NW7E Outdoor Ethernet Gland Installation 10
6.2 NW7 and NW7E Indicating LED Details 12
6.3 NW7 and NW7E Outdoor Standard Mounting Hardware 13
6.4 NW7 and NW7E Outdoor Upgrade Mounting Hardware 14
7.0 Detailed Power Requirements 15
8.0 Key Default Configurations 16
9.0 Quick Configuration 17
10.1 STATUS Page – Access Point 18
10.2 STATUS Client Page - Client 21
10.3 WIRELESS SETTINGS Page – Access Point 24
10.4 WIRELESS SETTINGS - Client Page - Client 29
10.5 NETWORK SETTINGS – Client or Access Point 33
10.6 SYSTEM TOOLS Page – Client and Access Point 36
10.7 ADMIN Page – Client or Access Point 41
11.0 Agency Compliance 46
12.0 GPL (General Public License) Statement 48
INS_NW7[E]_REV– 06/10/13 PAGE 4
INSTALLATION AND OPERATION MANUAL NW7/NW7E
TECH SUPPORT: 1.888.678.9427
Overview
Legal Information
No part of this document may be reproduced or transmitted in any form or by any means,
electronic and mechanical, for any purpose, without the express written permission of ComNet.
Copyright
Copyright © 2013 ComNet. All rights reserved.
Disclaimer
ComNet reserves the right to make changes in specifications at any time without notice. The
information furnished by ComNet in this material is believed to be accurate and reliable. However,
ComNet assumes no responsibility for its use.
INS_NW7[E]_REV– 06/10/13 PAGE 5
INSTALLATION AND OPERATION MANUAL NW7/NW7E
TECH SUPPORT: 1.888.678.9427
1.0 Introduction
The NetWave® environmentally hardened high throughput (HT) wireless Ethernet transmission
device can be configured through the embedded User Interface as a Client or as an Access
Point. This single radio model was designed for high throughput point-to-point or multi-
point applications and comes with an integrated 19dBi, 17° beamwidth antenna. The NW7[E]
supports up to 240Mbps throughput using MIMO technology. The units can be powered by an
802.3af/at PoE Compliant device or through a supplied power injection module with the second
Ethernet port serving as an IEEE802.3at power source. The NW7 is FCC certified for use in
North America and the NW7E is ETSI, DFS and TPC certified for use in the European Union.
This manual contains detailed operational and configuration information not covered in the
quick start guides.
This guide applies to the following models:
NW7 – Individual Hardened Single Radio, Two Gb Ethernet Ports, one internal 19dBi 17°
beamwidth directional antenna, Includes power injection module, power supply
and mounting assembly, Port 1 Supports 802.3af/at PD PoE Power, Port 2 provides
IEEE802.3at PSE PoE Power, FCC certified for use in the NA Region.
NW7E – Individual Hardened Single Radio, Two Gb Ethernet Ports, one internal 19dBi 17°
beamwidth directional antenna, Includes power injection module, power supply
and mounting assembly, Port 1 Supports 802.3af/at PD PoE Power, Port 2 provides
IEEE802.3at PSE PoE Power, ETSI certified for use in the EU Region.
INS_NW7[E]_REV– 06/10/13 PAGE 6
INSTALLATION AND OPERATION MANUAL NW7/NW7E
TECH SUPPORT: 1.888.678.9427
2.0 Point to Multi-Point – NW7 and NW7E
These individual units allow the user to configure for either multipoint access point or client
operation. The NW7[E] supports integrated 19dBi 17° directional antenna or an optional 8dBi 70°
internal antenna. See the ComNet website for the latest information regarding antenna support.
PC NVR NW7/IA870
(240 Mbps
Access Point)
NW1 (Client)
PoE
PIM or other
PSE device
Power
IP Camera
Ethernet Ethernet
NW1 (Client)
PoE
PIM or other
PSE device
Power
IP Camera
Ethernet Ethernet
NW1 (Client)
PoE
PIM or other
PSE device
Power
IP Camera
Ethernet Ethernet
P1
PoE
1Gbps
Ethernet
Multiple Remote Camera Topologies
NW1 (Client)
PoE
PIM or other
PSE device
Power
IP Camera
Ethernet Ethernet
NW1 (Client)
PoE
PIM or other
PSE device
Power
IP Camera
Ethernet Ethernet
NW1 (Client)
PoE
PIM or other
PSE device
Power
IP Camera
Ethernet Ethernet
NWAVBSA1
External Antenna
PIM or any
PSE device
NW7
(Access Point)
NW8
(Client)
ComNet Gigabit
Managed Switch
providing 30W PoE
Connected to Network
P1
P1
PoE
PoE+
1Gbps
Ethernet
PORT 1 PD
PORT 2 PSE
P1
P2
LEGEND
WIRELESS
CAT5
POWER
ETHERNET 50Ω COAX
INS_NW7[E]_REV– 06/10/13 PAGE 7
INSTALLATION AND OPERATION MANUAL NW7/NW7E
TECH SUPPORT: 1.888.678.9427
3.0 Point-to-Point Systems – NW7 and NW7E
In a point-to-point design, the client has the added feature of MAC Address Locking which
is not available in a point to multipoint design. MAC Lock enables higher operating EIRP and
increased security for FCC versions.
High Throughput Point-to-Point Topology (Shown with PoE Cameras)
PoE Camera
.
.
.
.
.
.
PoE Camera
NW7
(Access Point)
NW7
(Client)
ComNet Gigabit
Managed Switch
providing 30W PoE
Connected to Network
ComNet Gigabit
Managed Switch
providing 30W PoE
P1 P1
NW7
(Client)
NW7
(Access Point)
Point-to-Point Topology (Shown with 24VAC and PoE Powered Cameras)
ComNet Managed
Switch with 30W PoE
Connected to Network
PIM or any
PSE device
PoE Camera
PoE Camera
Power
P1
P2
PoE
1Gbps
Ethernet
PoE
1Gbps
Ethernet
PoE
Ethernet Ethernet
PoE
Ethernet
PoE
Ethernet
PoE
Ethernet
PoE
1Gbps
Ethernet
PORT 1 PD
PORT 2 PSE
P1
P2
LEGEND
WIRELESS
CAT5
POWER
ETHERNET 50Ω COAX
INS_NW7[E]_REV– 06/10/13 PAGE 8
INSTALLATION AND OPERATION MANUAL NW7/NW7E
TECH SUPPORT: 1.888.678.9427
4.0 PoE Pass-through Port – NW7 and NW7E
The NetWave NW7 and NW7E come with dual Gigabit Ethernet ports. Port 1 supports
IEEE 802.3af/at PD PoE power and Port 2 is a Power over Ethernet IEEE 802.3at PSE (Power
Sourcing Equipment) port that acts as a voltage source and supplies PoE PD devices with
power via the Ethernet cable.
A. OUT port of the Power Injection
Module (PIM)
B. IN port of the PIM
C. Power socket of the PIM.
D. External PoE device, typically a
camera as shown
E. Drip Loop (recommended)
A
E
E E
P2P1
B
C
Ethernet
Network
D
NW7
PoE Camera
ComNet Gigabit
Managed Switch
providing 30W PoE
P1
P2
PoE+
PoE+
Ethernet
INS_NW7[E]_REV– 06/10/13 PAGE 9
INSTALLATION AND OPERATION MANUAL NW7/NW7E
TECH SUPPORT: 1.888.678.9427
5.0 Cabling Requirements
Shielded CAT 5 or better should be used for all out of plant Ethernet connection and should
be properly grounded through the PoE AC ground. Industrial grade shielded Ethernet cable is
recommended to help prevent ESD damage commonly experienced with outdoor installations.
Visit www.comnet.net/comnet-products/cables
Gigabit Ethernet
Port 1 (PoE IN)
Gigabit Ethernet
Port 2 (PoE OUT)
INS_NW7[E]_REV– 06/10/13 PAGE 10
INSTALLATION AND OPERATION MANUAL NW7/NW7E
TECH SUPPORT: 1.888.678.9427
6.0 Hardware Installation
6.1 NW7 and NW7E Outdoor Ethernet Gland Installation
There will be two cable glands and a weather seal cap included with each outdoor enclosure.
The provided weather seal cap should be used when Port 2 is not in use to prevent damage to
the port and the wireless device.
Below is an image of the individual parts of the gland with an Ethernet cable routed through.
Note: The split rubber washer allows a pre-terminated Ethernet cable to be used.
Once the cable has been routed through the weather connection as shown, push the split
rubber gasket into place and loosely screw the cap that goes over the rubber washer.
Below is an image with the Ethernet connection made to the node and the gland assembly
about to be installed.
Once the RJ45 connection has been made, screw in the gland into the housing making sure it is
tight enough for a water tight seal but not so tight to cause the rubber seal to squeeze off.
Andere Handbücher für NetWave NW7
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Comnet Tor Handbücher
Beliebte Tor Handbücher anderer Marken
LST
LST M500RFE-AS Bedienungsanleitung
Kinnex
Kinnex Media Gateway Bedienungsanleitung
2N Telekomunikace
2N Telekomunikace 2N StarGate Bedienungsanleitung
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung
Telsey
Telsey CPVA 500 - SIP Bedienungsanleitung
