Compac C4000 Futra Bedienungsanleitung
Compac Industries Ltd.
52 Walls Road. Penrose. Auckland 1061. New Zealand.
PO Box 12 417. Penrose. Auckland 1642. New Zealand.
www.compac.co.nz
Connecting a 3rd Party Meter
Version No 1.4
Model: C4000
Date: 13/06/2019
1.
Scope
Scope
This instruction sheet is for connecting a 3rd party meter to the C4000. Please note that the
Triscan interface board has been used previously for pulse applications. However, in this
application it is used as a barrier to connect a 3rd party meter. Connections in each
application are different and attention should be paid to the location and connections of this
application.
See the following photo for the location of the Triscan interface board in this application.
Wiring
To hold the Electrical certificate for the C4000 the meter must be connected to the C4000 via
a barrier. The below is the wiring to connect the C4000 Power supply to a 3rd party Open
collector output meter.
NOTE: the meter must be powered by its own power supply.
2.
Wiring
There are 4 connections that are made when conecting a 3rd party meter to the C4000 power
supply. These are Meter power, (12 to 15 volts) Channel A, Channel B and Ground.
J12 Connector
From 3rd party meter Channel A
From 3rd party meter GND
From 3rd party Power 12 to 15 volts
From 3rd party meter Channel B
J12
DTR
CTS
TXDP
GND
3.
Wiring
Brodie Meter Connections
The Brodie meter can be connected to the C4000. Shown is the Brodie connection board:
And shown are the connections:
Brodie meter
C4000
Pin 1 12 volt power supply
From 3rd party Power 12 to 15 volts
Pin 2 Ground
From 3rd party meter GND
Pin 3 Channel A
From 3rd party meter Channel A
Pin 5 Channel B
From 3rd party meter Channel B
The jumper connections are as follows:
J1
Keep default
J2
Keep default
J3
A
J4
A
Refer to page 2 for diagrams of the connections.
Andere Handbücher für C4000 Futra
4
Andere Compac Steuereinheit Handbücher
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
