Compak CUBE TAMP Bedienungsanleitung
AUTOMATIC ELECTRONIC
COFFEE TAMPER
CUBE
TAMP
INSTRUCTION
MANUAL
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v 01/09/2022 | K08021H09
2
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 01/09/2022 | K08021H09
3
SAFET Y 4
DESCRIPTION 6
INSTRUCTIONS 7
IDENTIFICATION 8
TECHNICAL CHARACTERISTICS 9
EXTERNAL COMPONENTS 11
INSTALLATION 12
OPERATION 14
TROUBLESHOOTING 18
DECLARATION OF CONFORMITY 19
AUTOMATIC ELECTRONIC
COFFEE TAMPER
CUBE
TAMP
CONTENTS
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v 01/09/2022 | K08021H09
4
1. SAFETY
READ THE SAFETY AND USE
INSTRUCTIONS CAREFULLY
BEFORE FIRST USING
THE APPLIANCE
This device should
only be used for the
function for which
it was designed: tamping
ground coee.
Do not use the
device to press any
other types of food
such as nuts or granulated
foods such as sugar and
others.
This device may be
used by children
aged 8 years and
over, by people with
reduced physical, sensory
or mental capacities and
by people without prior
experience/knowledge,
provided they have received
supervision or instructions
on the safe use of the
device and understand the
associated risks.
Children should not
play with the device.
Cleaning and
maintenance of the
device should not be
carried out by children without
supervision.
Do not allowing
liquids to come
into contact with
internal or external surfaces
while the appliance is on or
o, except for those parts
expressly mentioned in the
“CLEANING” section.
If, for any reason, this happens,
disconnect the power supply
immediately and dry all
surfaces carefully.
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 01/09/2022 | K08021H09
5
When maintaining the
coee tamper, special
care should be taken
as it could cut the maintainer.
The use of suitable gloves
when handling it is
recommended.
NOTE: The manufacturer will not be liable for damages caused either
by the improper use of the device or by not following the stated safety
measures
1. SAFETY
USERS SHOULD PAY SPECIAL
ATTENTION TO AND SCRUPULOUSLY
OBEY THE FOLLOWING SAFETY
INSTRUCTIONS
Any other use will be
considered improper
and dangerous
Do not insert any
part of the body
between the coee
tamper and the holder.
If it is necessary to
access the interior,
where the electrical
components are located, go to
the nearest technical service
In the event of
any component
breaking, or for
any intervention we
recommend contacting a
technical services centre,
who will carry out the repair
or replacement, guaranteeing
that safety standards are
adhered to.
Only an authorised
supplier may replace
the mains cable of
any machine.
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v 01/09/2022 | K08021H09
6
2. DESCRIPTION
The coee tamper you have purchased
has been designed using the most
innovative technological systems.
The result is a high quality product
that ensures the best results.
Our products are manufactured entirely
by hand, one at a time, following the most
demanding quality requirements.
In its manufacturing process, quality
materials (aluminium, steel, etc.) are used,
which are suitable for contact with food.
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 01/09/2022 | K08021H09
7
3. INSTRUCTIONS
3.1. This manual provides the information
necessary for the correct installation,
handling and maintenance of the
equipment and highlights
the precautions that should
be taken by the operator.
To ensure you get the best out of the
machine, it is essential to carefully follow
the instructions given in this manual.
If there is any kind of problem,
contact the nearest technical service.
This manual should be kept until the
machine is replaced and must always be
available to the operator.
3.2. This manual uses some special terms,
such as:
• Text in bold to highlight the importance
of some terms.
• Numbers in parentheses after a word,
which match the numbering of the
items in the image to the side or in the
image of the external components.
Example: ( ) - Display
Icons:
Information Attention
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v 01/09/2022 | K08021H09
8
The technical characteristics
plate is indelibly marked with the
following information:
NOTE: The manufacturer reserves the right to change components/
configurations of any model, according to the dierent geographic market
demands.
4. IDENTIFICATION
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 01/09/2022 | K08021H09
9
5. TECHNICAL CHARACTERISTICS
5.1. SCOPE
The coee tamper that you have purchased
is intended for shops and communities
ground coee needs to be tamped
and it should only be used for this purpose.
Any other use is considered
improper and dangerous.
NOTE: The manufacturer will not be held responsible for any damages
resulting from improper use of the equipment, or for not following
the safety measures as outlined below.
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v 01/09/2022 | K08021H09
10
5. TECHNICAL CHARACTERISTICS
5.2. TECHNICAL DATA
110/220/240 V
50/60 Hz
Voltage/Frequency 65 W
Weight
Height
Width
Depth
Tamp diameter
6,3
290,3
167,7
185,0
See identification plate
Kg mm mm
Andere Handbücher für CUBE TAMP
1
Inhaltsverzeichnis
Andere Compak Kaffeemaschine Handbücher
