8
IMPORTANT INFORMATION FOR USE
During operation all surfaces will be extremely hot and
should not be touched or handled.
During operation the door handle may become HOT.
Ensure that you use an oven mitt when touching the
handle.
Take care that the primary air intakes, located on the
burner tube of this appliance are not obstructed, or that
air ow is restricted by placing items or other appliances
close to or adjacent to the inlets.
Do not attempt to move or relocate the appliance when
it is operating, extinguish the burner and allow to cool,
disengage the gas cylinder then move the appliance.
This appliance is to be stored in a dry and well-
ventilated location free from direct sunlight. Do not store
when still connected to the cylinder.
Make sure that the cylinder is disconnected and is stored
in a well ventilated area, out of the reach of children,
free from direct sunlight, heat and ignition sources. If
being stored indoors, ensure that the location complies
with the standard AS/NZS 1596.
Never leave appliance unattended when operating.
Do not use a multiple appliances to heat a single utensil.
Only cooking vessels with a maximum diameter of 20cm
are to be used with this appliance.
Do not use as a space heater.
Use as a cooking appliance only, is not to be used as
heater or modify for any other reason.
Avoid boil over and spills on to burners.
After use, turn the gas cylinder valve off, wait for
the ame to go out, then turn the appliance control
valve(s) off.
Avoid twisting or kinking the exible hose.
To check if gas remains in the cylinder, disconnect from
the appliance and hold the cylinder in a vertical position
then shake from side to side, if there is a sound or feel of
liquid movement inside, the cylinder contains gas.
Do not place anything e.g. re proof
mat between pan support, as serious
damage to the appliance may result.
Do not remove the pan support and
enclose the burner with a wok stand as
this will concentrate and deect heat
onto the hotplate.
Do not use large pots or heavy weights
which can bend the pan support or
deect ame onto the hotplate.
Locate pan centrally over the burner so
that it is stable and does not overhang
the appliance.
Use only wok support supplied or
recommended by the manufacturer of
the appliance.
