Compaq Storageworks SAN Switch 8 Montageanleitung
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: A-FRNT.DOC Last Saved On: 9/30/99 12:27 PM
SAN Switch 8
Installation and Hardware Guide
First Edition (September 1999)
Part Number EK-BCP24-IA / 161355-001
Compaq Computer Corporation
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: A-FRNT.DOC Last Saved On: 9/30/99 12:27 PM
Notice
The information in this publication is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR
EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR
USE OF THIS MATERIAL. THIS INFORMATION IS PROVIDED “AS IS,” AND COMPAQ
COMPUTER CORPORATION DISCLAIMS ANY WARRANTIES, EXPRESS, IMPLIED, OR
STATUTORY AND EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, GOOD TITLE, AND AGAINST
INFRINGEMENT.
This publication contains information protected by copyright. No part of this publication may be
photocopied or reproduced in any form without prior written consent from Compaq Computer
Corporation.
© 1999 Compaq Computer Corporation.
All rights reserved. Printed in the U.S.A.
The software described in this guide is furnished under a license agreement or nondisclosure agreement.
The software may be used or copied only in accordance with the terms of the agreement.
Compaq, Deskpro, Fastart, Compaq Insight Manager, Systempro, Systempro/LT, ProLiant, ROMPaq,
QVision, SmartStart, NetFlex, QuickFind, PaqFax, and ProSignia are registered with the United States
Patent and Trademark Office.
TaskSmart, Netelligent, Systempro/XL, SoftPaq, QuickBlank, and QuickLock are trademarks and/or
service marks of Compaq Computer Corporation. Neoserver is a trademark of Compaq Information
Technologies Group.
Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
Pentium is a registered trademark and Xeon is a trademark of Intel Corporation.
Other product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies.
Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide
First Edition (September 1999)
Part Number EK-BCP24-IA / 161355-001
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: A-FRNT.DOC Last Saved On: 9/30/99 12:27 PM
Contents
About This Guide
Text Conventions ........................................................................................................ ix
Symbols in Text ........................................................................................................... x
Symbols on Equipment................................................................................................ x
Rack Stability.............................................................................................................. xi
Getting Help...............................................................................................................xii
Compaq Technical Support.................................................................................xii
Compaq Website.................................................................................................xii
Compaq Authorized Reseller.............................................................................xiii
Chapter 1
Introduction
Compaq StorageWorks SAN Switch 8.....................................................................1-1
Front Panel ................................................................................................................1-2
Compaq StorageWorks SAN Switch 8 Features.......................................................1-3
Performance ..............................................................................................................1-5
Manageability............................................................................................................1-5
Reliability..................................................................................................................1-6
Serviceability.............................................................................................................1-6
Switch Components ..................................................................................................1-7
GBIC Modules...................................................................................................1-8
Switching Function............................................................................................1-9
iv Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: A-FRNT.DOC Last Saved On: 9/30/99 12:27 PM
Chapter 2
Installation
Package Contents...................................................................................................... 2-1
Selecting an Operating Location............................................................................... 2-2
Cooling Requirements .......................................................................................2-2
Power Requirements.......................................................................................... 2-2
Selecting a Switch Mounting Method....................................................................... 2-3
Surface Mounting .............................................................................................. 2-3
Rack Mounting .................................................................................................. 2-3
Installing GBIC Modules..........................................................................................2-3
Cable Specifications.................................................................................................. 2-4
Fibre Channel Cables.........................................................................................2-4
Serial Cables ...................................................................................................... 2-5
Connecting the Storage Subsystem and Host ........................................................... 2-6
Connecting the Power Cable.....................................................................................2-7
Connecting the Serial Cable...................................................................................... 2-7
Connecting the Ethernet Cable .................................................................................2-8
Chapter 3
Setup
Powering Up the Switch ...........................................................................................3-1
Front Panel LED Indicators...............................................................................3-1
Making a Serial Connection......................................................................................3-2
Connecting Through a Workstation................................................................... 3-3
Verifying the Power-On Self-Test..................................................................... 3-3
Setting the IP Address........................................................................................3-3
Resetting Factory Defaults ................................................................................3-4
Initiating a Telnet Session.........................................................................................3-4
Contents v
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: A-FRNT.DOC Last Saved On: 9/30/99 12:27 PM
Chapter 4
Diagnostics
Diagnostic Overview.................................................................................................4-1
Isolating a System Fault.....................................................................................4-1
Removing Power................................................................................................4-2
Power-On Self-Tests..........................................................................................4-2
Diagnostic Commands..............................................................................................4-2
ramTest...............................................................................................................4-3
portRegTest........................................................................................................4-4
centralMemoryTest............................................................................................4-4
cmiTest...............................................................................................................4-5
camTest..............................................................................................................4-5
portLoopbackTest ..............................................................................................4-6
sramRetentionTest .............................................................................................4-7
cmemRetentionTest ...........................................................................................4-8
crossPortTest......................................................................................................4-8
spinSilk.............................................................................................................4-11
diagClearError..................................................................................................4-15
diagDisablePost................................................................................................4-16
diagEnablePost.................................................................................................4-16
diagShow..........................................................................................................4-16
setGbicMode....................................................................................................4-18
supportShow.....................................................................................................4-19
Diagnostic Error Messages .....................................................................................4-21
Chapter 5
Error Messages
System Error Message Formats ................................................................................5-1
Diagnostic Error Message Formats...........................................................................5-2
Error Message Numbers............................................................................................5-3
Error Message Table..........................................................................................5-8
Chapter 6
Repair and Replacement
Repair and Replacement Overview...........................................................................6-1
Field Replaceable Units ............................................................................................6-2
Replacing the Power Supply.....................................................................................6-3
Removing the Power Supply .............................................................................6-3
Installing the Power Supply...............................................................................6-4
Replacing a GBIC Module........................................................................................6-4
Removing a GBIC Module................................................................................6-5
Installing a GBIC Module..................................................................................6-6
Removing the Switch Cover .....................................................................................6-6
vi Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: A-FRNT.DOC Last Saved On: 9/30/99 12:27 PM
Repair and Replacement
continued
Replacing the Switch Cover......................................................................................6-6
Replacing the Fan Assembly ....................................................................................6-7
Removing the Fan Assembly............................................................................. 6-8
Installing the Fan Assembly ............................................................................6-10
Replacing the Motherboard.....................................................................................6-11
Removing the Motherboard.............................................................................6-11
Installing the Motherboard ..............................................................................6-12
Replacing the Chassis ............................................................................................. 6-13
Removing the Switch Components .................................................................6-13
Installing the Switch Components................................................................... 6-14
Appendix A
Regulatory Compliance Notices
Regulatory Compliance Identification Numbers..................................................... A-1
Federal Communications Commission Notice ........................................................ A-1
Class A Equipment ........................................................................................... A-2
Class B Equipment............................................................................................ A-2
Modifications.................................................................................................... A-3
Canadian Notice (Avis Canadien) ........................................................................... A-4
Class A Equipment ........................................................................................... A-4
Class B Equipment............................................................................................ A-4
Mouse Compliance Statement ................................................................................. A-4
European Union Notice............................................................................................ A-4
Japanese Notice........................................................................................................ A-5
Taiwanese Notice..................................................................................................... A-5
Laser Devices........................................................................................................... A-5
Laser Safety Warnings...................................................................................... A-6
Compliance with CDRH Regulations............................................................... A-6
Compliance with International Regulations ..................................................... A-6
Laser Product Label.......................................................................................... A-6
Laser Information ............................................................................................. A-7
Appendix B
Electrostatic Discharge
Grounding Methods ..................................................................................................B-2
Contents vii
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: A-FRNT.DOC Last Saved On: 9/30/99 12:27 PM
Appendix C
Specifications
General Specifications ............................................................................................. C-1
Fabric Management Specifications.......................................................................... C-2
Safety Specifications................................................................................................ C-2
Optical Port Specifications....................................................................................... C-3
Environmental Specifications .................................................................................. C-4
Dimensions............................................................................................................... C-4
Power Supply ........................................................................................................... C-5
Index
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: A-FRNT.DOC Last Saved On: 9/30/99 12:27 PM
About This Guide
This guide is designed to be used as step-by-step instructions for installation
and as a reference for operation, troubleshooting, and future upgrades.
Text Conventions
This document uses the following conventions to distinguish elements of text:
Keys Keys appear in boldface. A plus sign (+) between
two keys indicates that they should be pressed
simultaneously.
USER INPUT User input appears in a different typeface and in
uppercase.
FILENAMES File names appear in uppercase italics.
Menu Options,
Command Names,
Dialog Box Names
These elements appear in initial capital letters.
COMMANDS,
DIRECTORY NAMES,
and DRIVE NAMES
These elements appear in uppercase.
Type When you are instructed to type information, type
the information without pressing the Enter key.
Enter When you are instructed to enter information, type
the information and then press the Enter key.
x Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: A-FRNT.DOC Last Saved On: 9/30/99 12:27 PM
Symbols in Text
These symbols may be found in the text of this guide. They have the following
meanings.
WARNING: Text set off in this manner indicates that failure to follow directions
in the warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions
could result in damage to equipment or loss of information.
IMPORTANT: Text set off in this manner presents clarifying information or specific
instructions.
NOTE: Text set off in this manner presents commentary, sidelights, or interesting points
of information.
Symbols on Equipment
These icons may be located on equipment in areas where hazardous conditions
may exist.
Any surface or area of the equipment marked with these symbols
indicates the presence of electric shock hazards. Enclosed area
contains no operator-serviceable parts.
WARNING: To reduce the risk of injury from electric shock hazards,
do not open this enclosure.
Any RJ-45 receptacle marked with these symbols indicates a Network
Interface Connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the
equipment, do not plug telephone or telecommunications connectors
into this receptacle.
About This Guide xi
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide Comments:
Part Number: EK-BCP24-IA / 161355-001 File Name: A-FRNT.DOC Last Saved On: 9/30/99 12:27 PM
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
Power supplies or systems marked with these symbols indicate
the equipment is supplied by multiple sources of power.
WARNING: To reduce the risk of injury from electric shock,
remove all power cords to completely disconnect power from
the system.
Any product or assembly marked with these symbols indicates that
the component exceeds the recommended weight for one individual
to handle safely.
WARNING: To reduce the risk of personal injury or damage to the
equipment, observe local occupational health and safety
requirements and guidelines for manual material handling.
Rack Stability
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
■The leveling jacks are extended to the floor.
■The full weight of the rack rests on the leveling jacks.
■The stabilizing feet are attached to the rack if it is a single rack installation.
■The racks are coupled together in multiple rack installations.
■A rack may become unstable if more than one component is extended for
any reason. Extend only one component at a time.
Inhaltsverzeichnis
Andere Compaq Storageworks Schalten Handbücher
