DC Battery Connection
User may connect EC5 connector with rechargeable battery.
COMP-RB1220, 12V 20A battery can support 2 hours operation
COMP-RB1210, 12V 10A battery can support 1hour operation, connect with vehicle 12V charging
will extend the cooling time.
Power Adapter Connection
User may connect it with Power adapter COMP-PA280-11012, powered by AC110V wall plug.
Cooling Garment Connection
User may connect the chiller with Compcooler Cooling Vest or Cooling pad by quick release
fittings. One extension tubing was provided with chiller.
Chiller unit is compatible with all Compcooler garment, if you want to try other brand garment,
please remove the quick fitting from extension hose and replace the new fittings to compatible
with other cooling garment.
Circulation Liquid
User needs to fill circulation liquid by twice.
The first time, remove the filler cap from top side, add liquid to full by funnel, connect the cooling
garment, turn on the pump and circulates the liquid from reservoir to cooling garment.
The second time, keep running and allow the liquid cooling garment fill with water for 30-60
seconds (without cooling), refill again to full (maybe couple times, be patient), then tight the filler
cap.
Clean or distilled water is fine if ambient more than 1℃
Deionized water for isolation request.
Anti-freeze liquid for ambient below 0℃.
DO NOT use salt water, caustic, corrosive or flammable fluids!
Refrigeration or Pre-cool Testing
User may turn on the system and start refrigeration, no pump circulation, temperature will down
in minutes. Cooling unit will be in standby mode once liquid temperature reaches to setting point.
