COMPRO CP180 Bedienungsanleitung

User’s Guide

V1-110607

P/N: 3GA0310721

Model No.

CP180

Before attempting to set up or operate this camera,

please read this user's guide and retain it for future

reference.

Analog Video Camera

Trademark

Compro Technology is the registered trademark of Compro Technology

Inc. All other company and product names mentioned in this document are registered

trademarks of the respective companies.

Restriction

No part of this document may be copied or reproduced in any form or by any means

without the prior written consent of Compro Technology, Inc.

Disclaimer

Compro Technology makes no warranties with respect to this documentation and

disclaims any implied warranties of merchantability, quality, or tness for any particular

purpose. The information in this document is subject to change without notice.

COMPRO reserves the right to make revisions to this publication without obligation to

notify any person or entity of any such changes.

Revision History

2011/01/27 Original version

Compro Technology Inc.

www.comprosecurity.com

Tel. +886 2 2918 0169, Fax +886 2 2915 2389

3F, No.12, Alley 6, Lane 45, Pao Shin Road,

Hsintien District, New Taipei City 231, Taiwan

Support e-mail: suppor[email protected]

Compro CP180 - User's Guide

Contents

Table of Contents

Important Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

IR Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Power Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installation & Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connecting Video and Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

D/N Mode Jumper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Operating the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Setup Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Camera Operation Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Technical Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Compro CP180 - User's Guide

2Important Notices

Regulatory Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) This device

must accept any interference received, including interference that may cause undesired

operation.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by one of the following

measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandreceiver.

• Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthe

receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

To assure continued compliance, any changes or modications not expressly approved

by the party responsible for compliance could void the user's authority to operate this

equipment.

Safety Rules

• Thecameraoughttobeinstalledbyaqualiedtechnician.

• Placethecameraonalevelsurfacewheneverpossible.

• Donotdropthecamerabodytotheground;itmaycausethedamagetomainparts.

• Pleasedonotdisassembleorremodeltheproduct;itmaycausedamageorre.

• Donotshake,moveordisturbthecamerawhenitisinoperation,assuchactions

may result in the malfunction of the device.

• Powerothecameraassoonasitisfoundsmokingorsmeltunusual.

• Pleasedonotplacethecameraaroundtheheatsources,suchastelevisionor

microwave oven.

Important Notices

Compro CP180 - User's Guide

Product Overview

Package Contents

Contact your local distributor should you nd anything missing from the package.

12 3 4

Analog camera (with body cap) x 1

Power terminal block x 1

IR terminal block x 1

User's guide x 1

Hardware Overview

Body cap – Remove the body cap to mount the lens you purchased.

Screw hole – For ceiling mount and bracket.

DC auto iris lens connector – Connect to the cable from your DC auto iris lens.

Operation buttons – Used to perform OSD settings.

Video output terminal – Connect to a BNC video cable.

IR connector – Connect to a switch to control IR-cut lter externally. Under external

D/N mode, when the positive and negative pole are connected (with a jumper or

otherwise),theIR-cutlterwillbeused;whentheyaredisconnected,theIR-cutlter

will be removed.

Power input terminal – A 3-pin power connector.

Product Overview

Compro CP180 - User's Guide

4Product Overview

Note:

The camera is configured in digital day/night mode by default,

which does not use IR cut filter during daytime and nighttime.

And once the positive and negative pole of the IR connector are

disconnected, camera image will turn monochromatic. To switch to

external day/night mode, refer to the 'D/N Mode Jumper' section.

IR Connector Pinout

The following describes the pinout of the IR connector used to control IR-cut lter.

2 1

Pin Function

3.3V DC or floating: camera switches to night

mode with IR-cut lter removed.

Ground or connection to pin-2: camera

switches to day mode with IR-cut lter in use.

2 Ground

Power Connector Pinout

The following describes the pinout of the terminal power connector.

Pin Function

1 + 12V DC

2COM

3 24V AC

Compro CP180 - User's Guide

Installation & Connections

Installing Lens

Installation & Connections

The following describes how to attach your lens to the camera.

1. Remove the body cap at the front of the camera.

2. Screw the lens into the camera body. While you’re gently turning the lens

clockwise, you will hear a 'click'. Then twist the lens by another one-third inch to

rmly secure the lens. If you are installing a DC auto iris lens, connect the lens'

control cable to the DC iris connector located at the back of the camera.

Connecting Video and Power

1. Use a BNC video cable to connect the terminal BNC connector from the camera

to a mating BNC connector.

2. Attach the Power adapter (optional accessory) to the terminal power connector

on the camera. The recommended adapter specications is DC 12V/500mA or AC

24V/500mA. Then connect the power plug to a power outlet.

Analog Camera

Power Adapter

Monitor

Compro CP180 - User's Guide

6Installation & Connections

D/N Mode Jumper

The D/N mode jumper lets you toggle between digital day/night mode (default) and

external day/night mode. In digital D/N mode, the IR-cut filter is always removed. In

external D/N mode, the IR-cut lter is used/removed by connecting/disconnecting the

positive pole and negative pole of the IR connector. If you wish to externally control the

IR-cut lter, follow the description below to switch to external D/N mode.

1. Power o the camera and loosen the four screws shown in the below gure to

remove the back panel. Then gently pull out the main circuit board connected to

the back panel to reveal the D/N jumper as circled in the gure below.

D/N Jumper (J7)

2 1 3 2

Digital D/N

(Default)

Ext. D/N

2. Reset the jumper (J7) to pins 2-3 to use external D/N mode. Then re-attach the

back panel.

3. Connect the IR connector on the back panel to an external switch or light sensor.

4. Connect the camera to a monitor and power. Press the setting button on the

back panel to enter the OSD menu. Select 'DAY/NIGHT' item and set it as 'COLOR'

(in digital D/N mode, set the 'DAY/NIGHT' item as 'AUTO').

Compro CP180 - User's Guide

Operating the Camera

Setup Menus

Prior to using this camera, enter the setup menu and make the appropriate settings

for each item in accordance with the condition of the camera's monitoring area. Listed

below is the structure of the setup menu.

Setup Item Description Available

Options Submenu Items

LENS

Lets you select the iris

adjustment mode of your

lens.

AUTO /

MANUAL

Under 'AUTO': type,

mode, speed

SHUTTER /

AGC

Allows you to congure

the shutter speed and

auto gain control function.

AUTO /

MANUAL

Under 'AUTO': mode

and brightness for

high/low luminance

Under 'Manual': mode,

shutter, AGC

WHITE BAL Provides adjustment on

white balance.

ATW / PUSH

/ USER1 /

USER2 /ANTI

CR / MANUAL /

PUSH LOCK

Under 'ATW': speed,

delay cnt, atw frame,

environment

Under 'USER1/2':

b-gain, r-gain

Under 'MANUAL': level

BACKLIGHT

Enables or disables the

back light compensation

function.

OFF / BLC / HLC N/A

PICT

ADJUST Species video properties.

MIRROR /

BRIGHTNESS

/ CONTRAST /

SHARPNESS /

HUE / GAIN

Under 'MIRROR': o, on

Under 'BRIGHTNESS/

CONTRAST/

SHARPNESS/HUE/

GAIN': 0~255

ATR

Lets you switch on/o

the ATR (Adaptive Tone

Reproduction) function.

OFF / ON Under 'ON': luminance,

contrast

MOTION

DET

Congures the motion

detection mode. OFF / ON

Under 'ON': detect

sense, block disp,

monitor area, area sel,

top, bottom, left, right,

right

Operating the Camera

Compro CP180 - User's Guide

8Operating the Camera

Setup Item Description Available

Options Submenu Items

PRIVACY Protects sensitive areas in

the scene. OFF / ON

Under 'ON': area sel,

top, bottom, left, right,

color, transp, mosaic

DAY /

NIGHT

Congures the day/night

function.

AUTO / COLOR/

B/W

Under 'AUTO': burst,

delay cnt, day > night,

night > day

Under 'B/W': burst

Provides settings for the

digital noise reduction

function.

NR MODE o, y, c, y/c

CAMERA ID

Creates a camera title

to be displayed on the

screen.

OFF / ON Under 'ON': key-in ID,

chr1, chr2, clr, pos

LANGUAGE Changes the language of

the setup menu

ENGLISH /

DEUTSCH /

FRANCAIS /

PУCCKИЙ /

PORTUGUĔS /

ESPAÑOL

N/A

CAMERA

RESET

Restores all the settings to

the default value N/A N/A

Inhaltsverzeichnis

Andere COMPRO Camcorder Handbücher

COMPRO

COMPRO CP480 Bedienungsanleitung

Beliebte Camcorder Handbücher anderer Marken

Toshiba

Toshiba CAMILEO Z100 Bedienungsanleitung

Panasonic

Panasonic NV-VS40B Bedienungsanleitung

Canon

Canon RC 260 Bedienungsanleitung

Sony

Sony Handycam DCR-DVD7E Bedienungsanleitung

Brinno

Brinno TimeLapse TLC200 Bedienungsanleitung

JVC

JVC GR-SXM68AC Kurzanleitung

Panasonic

Panasonic AG-HMC152EN Bedienungsanleitung

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Bedienungsanleitung

MYDLINK

MYDLINK DCS-6100LH Bedienungsanleitung

Sony

Sony video Hi8 Handycam CCD-TR555 Bedienungsanleitung

SECURECOM

SECURECOM V-5014B Bedienungsanleitung

Panasonic

Panasonic HDC-SD100 Bedienungsanleitung

Sharper Image

Sharper Image U-VIDEO Bedienungsanleitung

JVC

JVC AA-V15EG Bedienungsanleitung

Canon

Canon LEGRIA HV40 Bedienungsanleitung

Sony

Sony Handycam DCR-VX2000 Bedienungsanleitung

RCA

RCA CC616 Bedienungsanleitung

Panasonic

Panasonic NVM40 Bedienungsanleitung