Bluetooth Light Speaker Quick Start Guide
Introduction
This Bluetooth Light Speaker is a perfect combination of LED lamp and Bluetooth Speaker. It
can be controlled by iOS or Android system with application installed. You will be surprised to
match it well with your desk lamp. Enjoy it!
The Package Contents
1x Bluetooth Light Speaker
1x Quick Start Guide
Caution
1. Please read and follow all instructions before operating this product.
2. Heed all warnings on the product and in the operation instructions.
3. Please cut power off before install or uninstall the product.
4. When LED lamp on, suggest not touch the product surface in case being burned.
5. Suggest not use metal lampshade in case the wireless signal suffers from
attenuation.
6. With LED lamp on, if not plan to listen music, suggest to turn Bluetooth off by
pressing Bluetooth power button on application interface. It can save power, extend
Bluetooth lifetime and reduce interference to lamp from Bluetooth.
7. With LED lamp on and brightness not reaching 100%, there maybe some slight
background noise which is normal.
8. External dimmer does not work for the product. You can adjust lamp brightness by
using application on iOS or Android system.
9. Do not open the product to avoid electronic shock. Repair has to be performed by a
qualified technician.
10. Cut power off if not to use the product for a long period of time.
11. The product has a wireless transmission distance up to 33ft, but wireless
performance may be affected in different operating environment.
12. Keep the product out of extreme heat and humidity. Do not install it near heaters,
stoves or any other source of heat.
13. Do not use the product during lightning storms. Turn the power off to prevent damage
to the product due to lightning and power-line surges.
14. Please do not stare at the light source for a long time to protect your eyes.
15. If cleaning is required, use a soft dry cloth. Before cleaning, unplug the device from
the electrical source.
Product Installation
1. Take the Bluetooth Light Speaker and Quick start guide out of your package.
2. Before installing the Light Speaker into your lamp system, make sure the power is off.
3. Screw Light Speaker into E26 socket.
4. Turn the power on, white LED will be lit and speaker will enter Bluetooth pairing status with
indication LED blinking fast in blue.
