Comtrend Corporation WAP-5903 Bedienungsanleitung

! ! ! ! !Page 1

Quick Install Guide

WAP-5903 AC1200 Dual Band WiFi Mesh-Enhanced Extender

Understanding the WAP-5903 WiFi Mesh-Enhanced Extender

LED Color

LED Status

Description

Green

The device is connected via Ethernet cable

Blinking

The mesh system is processing

Blue

The device is connected to WiFi, and the connection quality is good

Blinking

The mesh system is processing

Red

The device is connected to WiFi, and the connection quality is weak

Blinking

The mesh system is processing

Green &Blue

Blinking

1. The device is booting up and on stand-by

2. The device has lost the uplink connection

Green & Blue &

Red

Blinking

1. The device is upgrading the firmware

2. The device is under reset to default process

Port/Button

Description

Reset

Factory Reset Function: Press and hold this button for over 10 seconds

UPLINK

Connect this port to the LAN port of the Comtrend Gateway/modem/router.

This port it used for Ethernet Pairing in a Comtrend WiFi mesh scenario.

LAN

Optional: Use this port to connect an Internet- enabled device (e.g. laptop, set-top-box, etc.).

Ethernet Port

Front

Back

POWER PORT

LAN

UPLINK

Bottom

RESET

LED

! ! ! ! !Page 2

Choose One

Scenario!I:

Setup with a Comtrend Gateway that supports WifiXtend2.0™

(Continue to Step B)

Scenario II:

Setup with either a non-Comtrend Gateway or

a Comtrend Gateway that does not support WifiXtend2.0™

(Continue to Step E)

WifiXtend2.0™ is Comtrend’s WiFi Mesh technology for enhanced whole-home WiFi coverage. The WAP-5903 and

select Comtend Gatways support WifiXtend2.0™. When WifiXtend2.0™ technologies are being utilized, the WiFi

network will automatically become a single network with one SSID and Password per band.

Scenario I: Setting up the WiFi Mesh Extender with a Comtrend Gateway that

Supports WifiXtend2.0™

1. Use the included Ethernet cable to connect one

end into the LAN port of the Comtrend Gateway

that supports WifiXtend2.0™ and the other end into

the UPLINK port of the WAP-5903.

2. Power on the WAP-5903 by connecting one end of

the Power Adapter into the Power Port of the WAP-

5903 and the other end into an outlet. The Ethernet

Pairing will automatically start processing and the

WAP-5903’s LED will begin blinking green.

3. Wait until the WAP-5903’s LED is solid green. This

means that the WAP-5903 is paired and grouped in

the same WiFi mesh network as the Comtrend

gateway.

4. If you are setting up more than one WAP-5903, then please follow instructions 1-3 with the additional WAP-

5903 units.

Comtrend Gateway

WAP-5903

Power Plug

Ethernet Cable

! ! ! ! !Page 3

Deploy the WiFi Mesh Extender

5. After the WAP-5903 is paired, move it to the nearest outlet where additional WiFi coverage is needed. Once

it is plugged in, wait for the LED to light up solid blue, which means it is ready.

The WiFi Mesh Network is Ready to Use!

6. The WiFi mesh network is automatically using the original WiFi configuration on the Comtrend Gateway. If

you would like to further change the network settings, then please refer to the Comtrend Gateway’s User

Manual to make changes directly to the Gateway.

Scenario II: Setting up the WiFi Mesh Extender with a Non-Comtrend

Gateway/Comtrend Gateway that does not Support WifiXtend2.0™.

Note: This scenario requires at least two WAP-5903 units to create a connection.

1. Optional: Disable the WiFi on the non-Comtrend

modem/router. This will help improve the performance

of the WiFi Mesh Extender and avoid confusing the

Internet-enabled devices.

2. Use the included Ethernet cable to connect one end

into the LAN port of the existing home modem/router

and the other end into the UPLINK port of the first WAP-

5903.

3. Power on this WAP-5903 by connecting one end of the

Power Adapter into the Power Port of the WAP-5903

and the other end into an outlet.

LED

Description

Solid

Blue

The WAP-5903 is placed in an ideal location

and is receiving a good WiFi signal.

Solid

Red

The WAP-5903 is placed too far away from

the Comtrend Gateway, and is receiving a

weak WiFi signal. Action Required: Move

the WAP-5903 closer to the Comtrend

Gateway.

WAP-5903

Power Plug

Ethernet Cable

Existing Modem/Router

! ! ! ! !Page 4

Setup the WiFi Network

4. You can now use your computer’s wireless configuration utility to search for a

Wireless Network name such as: Extender2368 or Extender2368-5G. (The default

SSID of this extender device is ‘Extender2368’, and 2368 is for reference. It is the

last 4 digits of the device’s MAC number.)

5. When you are prompted to input the security key, the WiFi Key (password) can

be found on the label at the back of the WAP-5903 device.

6. Click the OK button to connect to the network.

! ! ! ! !Page 5

7. Open your web browser, and input ‘http://extender-setup/’ in the address bar.

8. The system will prompt you to input the username and password. Default username is ‘root’ and password is

‘12345’. Click the OK button to continue.

9. After logging into the Web page, input the new SSID for both the 2.4GHz and 5GHz fields. The user can

setup a new password by inputting it in both the Key fields. Click the Apply/Save button to complete setup.

10. After applying the wireless setting the WAP-5903 will reboot. When the WAP-5903’s LED is solid green it means

it is ready.

! ! ! ! !Page 6

11. You can now connect the additional WAP-5903. Power on the additional WAP-5903 by connecting one end

of the Power Adapter into the Power Port of the WAP-5903 and the other end into an outlet. The Ethernet

Pairing will automatically start processing and the WAP-5903’s LED will begin blinking green.

12. Wait until the WAP-5903’s LED is solid green. This means that the WAP-5903 is paired and grouped in the

same WiFi mesh network as the first WAP-5903.

13. You can now move the additional WAP-5903 extender to the nearest outlet where more WiFi coverage is

needed. Once plugged in, wait for the LED to light up solid blue, which means it is ready.

14. Repeat steps 11-13 to add more WAP-5903 extenders to the mesh network.

The WiFi Mesh Network is Ready to Use!

FOR MORE HELP: For instructions on advanced features, FAQ, etc., please visit our online Product Webpage.

For more information:

YouTube: https://www.youtube.com/user/ComtrendConnection

Facebook: https://facebook.com/Comtrend

Website: http://us.comtrend.com/

Support: Visit our website or call (949) 753-9640

LED

Description

Solid

Blue

The WAP-5903 is placed in an ideal location

and is receiving a good WiFi signal.

Solid

Red

The WAP-5903 is placed too far away from

the first WAP-5903 (i.e. the one connected

to the modem/router), and is receiving a

weak WiFi signal. Action Required: Move the

WAP-5903 closer to the first WAP-5903.

! ! ! ! !Page 7

Federal Communication Commission Interference Statement

Radio

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and

your body.

Safety

Power Specifications(Alimentation ) :

Input: 12Vdc / 1.5A

Certification :

FCC / IC standard

Part 15B / ICES-003

Part 15C / RSS-247( 2.4GHz )

Part 15E / RSS-247( 5GHz )

1. For indoor user only

2. Do NOT use near water

3. Keep away from the fire

4. For use in ventilated environment / space

5. Do NOT open the casing

1. Cet appareil est conçu pour l'usage intérieur

seulement

2. N'utilisez pas cet appareil près de l'eau

3. N'approchez pas du feu

4. Veuillez utiliser dans un environnement aéré

5. N'ouvrez pas le boîtier

! ! ! ! !Page 8

Supplier’s Declaration of Conformity

Company: Comtrend Corporation - North America

Address: 530 Technology, Suite 100, Irvine CA 92618

Certify and declare under our responsibility that the following equipment:

Product Name: AC1200 Dual Band WiFi Mesh Extender

Model Name: WAP-5903

Brand Name: COMTREND

Is tested with the declaration described above, and is in conformity with the relevant FCC (Federal

Communication Commission) standards, and technical specifications have been applied:

Notes:

15.19(a)(3) Regulations :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

Class B :

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

EMC:

47 CFR FCC Rules and Regulations Part 15 Subpart B, Class BDigital Device

Andere Handbücher für WAP-5903

Inhaltsverzeichnis

Andere Comtrend Corporation Extender Handbücher

Comtrend Corporation

Comtrend Corporation WAP-60AX Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-5903 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-5836 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation PoE-9213 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-5883 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-5883 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-5834 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-5920 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-5920 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-5922 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung