Conair MAN XPET CLIP Bedienungsanleitung

TOOL TIPS

for the hair clipper with premium performance

& advanced technology, for EXPERT results.

VSM990A

CRAFT A

REPUTATION,

MY MAN

HERE YOU ARE.

RIGHT WHERE YOU NEED TO BE, MAN.

FROM THE STREETS OF

BROOKLYN, NEW YORK

WE ARE CHANGE

MAKERS & STYLE CREATORS.

WE’VE FOUGHT OUR WAY INTO

YOUR HANDS TO HELP YOU CRAFT

A REPUTATION, NOT JUST ENGAGE

IN SOME BRILLIANT GROOMING.

KNOW YOUR WORTH, INVEST IN IT MAN & CHECK OUT OUR INSIDER

KNOWLEDGE, TIPS & TRICKS TO MAKE THE MOST OF THE STYLE PATH

YOUR FEET ARE FIRMLY PLANTED ON. GIDDY UP, IT’S GROOMING TIME.

CHECK OUT CONAIRMAN.COM.AU FOR GROOMING TIPS

& KNOW HOW TO LET YOU CRAFT A REPUTATION

XPERT CLIP / TOOL TIPS

CRAFT A

REPUTATION,

MY MAN

XPERT CLIP / TOOL TIPS

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially when children are present, basic

safety instructions should always be followed, including the following:

Polythene bags over product or package may be dangerous. To avoid danger of

suffocation, keep this wrapper away from babies and children. This bag is not

a toy.

DANGER: When the unit is used in a bathroom, unplug it after use

since the proximity of water presents a hazard even when the

appliance is switched off

WARNING: Do not use or leave the AC power adaptor in a position where it

can become wet or there is a danger of it falling into a basin or other vessels

containing water. Keep the appliance dry, unless it otherwise specified. Do

not use this appliance in or near bathtubs, showers, basins or other vessels

containing water.

- Do not immerse appliance in water or other liquids.

- Do not reach for an appliance that has fallen into water. Unplug immediately.

- Take care to avoid contact between the moving blades of the unit and the

skin, paying particular attention to the face, neck and hands.

- This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the

appliance.

- For purposes of recharging battery, only use detachable supply unit provided

with this appliance

XPERT CLIP / TOOL TIPS

IMPORTANT: Always unplug the appliance when not in use or before cleaning.

Do not leave unattended when plugged in or switched on. Do not place on any

heat sensitive surface.

- Do not use any attachments other than those supplied by Conair Australia

Pty Ltd.

- Use this appliance only for its intended use as described within this

instruction booklet.

- Always unplug the appliance when fully charged.

- This appliance is not intended for commercial use.

- Never drop or insert any object into an opening.

- Do not use the appliance with damaged or broken attachment combs or with

any teeth missing from the blades, as injury may occur.

- Do not place on any surface while it is operating.

- Keep the cord away from heated surfaces

- Never twist or pull on the power cord.

- Do not use an extension cord with this appliance.

- After use do not wrap the cord around the appliance as in time this may cause

the cord to fracture. Coil cord loosely by the side of the appliance in storage.

- Do not use outdoors or operate where aerosol (spray) products are being

used or where oxygen is being administered.

- Do not use the appliance if it is damaged. In the event of damage, discontinue

use immediately and contact your dealer for instructions on returning it for

examination or exchange. If the supply cord is damaged, it must be replaced

by the manufacturer, its service agent or similarly qualified person in order

to avoid a hazard.

- Always ensure that the voltage to be used corresponds to the voltage marked

on the unit.

- For additional protection, the installation of a residual current device

(RCD) with a rated operating current not exceeding 30mA is advisable in

the electrical current circuit supplying the bathroom. Ask your installer for

advice.

XPERT CLIP / TOOL TIPS

1. Cord/cordless use

2. LED screen shows battery

life remaining, taper control

length setting & lock symbol

3. Lithium-ion power for long-

lasting 160min runtime

4. Ultra-premium Japanese

steel blades

5. 5 position fine adjustment

twist taper control

6. 8x Control comb guides –

grades #1, #2, #3, #4, #5,

#6, #7, #8

7. Left & right ear comb guide for

finishing around the ears

8. Premium hard case

9. Barber comb

10. Scissors

11. Cleaning brush

12. Oil

XPERT CLIP

HEY MAN, IT’S CLIPPING TIME.

The XPERT CLIP is the hair clipper with premium performance &

advanced technology for EXPERT results.

XPERT CLIP / TOOL TIPS

PREPPING YOUR

NEW TOOL

CHARGING

The XPERT CLIP is so easy to use. But before you start using your new tool, you

must take the time to charge it for 3 hours before its first use. Your new tool comes

with a small amount of charge, but the initial charge will ensure your new tool will

have optimum power performance to give you smooth fast cutting, every time.

- Before using for the first time, fully charge your new tool continuously for 3

hours.

- Maximum battery capacity will only be reached after 3 charging & discharging

cycles.

- Ensure your new tool is switched off.

- Insert the small plug on the charging adaptor into the socket on the bottom of

your new tool.

- Plug the charging adaptor into a suitable mains power socket & switch on.

- The LED screen will then display the battery life & the symbol will flash,

indicating that the appliance is charging.

- When the battery is fully charged, the LED screen will read 160 .

- A full charge of 3 hours will supply 160 minutes cordless runtime.

- A quick charge of 30 minutes will supply 30 minutes cordless runtime.

- When the clipper is running low on charge, the battery time remaining symbol

indication will turn red. This indicates that the clipper needs to be recharged,

however it may continue to run for a very short while after.

- lf the LED screen suddenly display “Er” then the appliance is faulty.

lf this happens then please stop charging & remove the adaptor from the mains

& contact our customer care centre for further advise (see the “warranty

section” section of the information booklet).

XPERT CLIP / TOOL TIPS

CORDED USE

To use the clipper connected to mains power:

• Ensure your new tool is switched off.

• Insert the small plug on the charging adaptor into the socket on the bottom

of your new tool.

• Plug the charging adaptor into a suitable mains power socket & switch on.

• The LED screen will come on & display the battery charge time remaining

when the adapter is correctly inserted into the appliance & connected to an

outlet

• Switch the clipper & the taper length selected will appear on the LED screen.

– NOTE – if the battery is weak & low on battery charge, wait approx. 1min

before switching the clipper on.

NOTE: The clipper should not be used for longer than 20 minutes when operated

with the cord.

XPERT CLIP / TOOL TIPS

HOW TO USE

THE XPERT CLIP

OILING THE BLADES

To get the sharpest, most precise cut, it is highly recommended to oil the blades before

each use.

• Using the oil supplied with your new tool, unscrew the cap & cut off the very end of

the plastic tube with a pair of scissors to release the oil.

• Switch your tool on, gently squeeze the oil tube & apply 2 drops of oil onto the blades.

Leave the tool on for a further few seconds to allow the oil to thoroughly spread

across each of the blades. Switch off the tool & remove any excess oil by gently

dabbing with a cloth.

BEFORE USING

• Always inspect the clipper blades for noticeable signs of damage.

• Always inspect the clipper blades before use to ensure they are free from hair, debris

etc.

• Ensure the clipper is sufficiently charged before use.

• For best performance use on clean hair that has been combed until tangle-free.

NOTE – The XPERT CLIP can be used on wet, thick & longer hair types, but always make

sure hair is well-combed before clipping.

5 POSITION TWIST TAPER CONTROL

The 5 position twist taper control is designed for blending layers & a precise close trim,

every time. The clipping length selected will appear on the LED screen when the clipper

power is turned on.

• To increase the cutting length, twist the wheel to the right.

• To reduce the cutting length, twist the wheel to the left.

• The LED screen will display the selected taper length between 0.6mm to 3mm.

XPERT CLIP / TOOL TIPS

EASY CLIPPING, YOUR WAY

ADVANCED ADAPTIVE CUTTING

The XPERT CLIP features 8x cutting comb guides – grades #1 to #8 (3mm to 25mm)

for cutting, shaping & fading.

The comb guides are marked with the following grade number:

Cutting Length Grade

3mm #1

6mm #2

9.5mm #3

13mm #4

16mm #5

19mm #6

22mm #7

25mm #8

Left Ear taper

Right Ear taper

PRECISION FINISH

The XPERT CLIP includes left & right ear comb guides to effortlessly

cut around the ears from any angle, for a quicker finish than

standard ear comb guides. To use:

• To attach the comb guide, ensure the appliance is switched off. Position the

comb guide over the front of the clipper blade & slide over the head.

Push & click the rear of the comb guide into position.

• Angle the clipper & gently stroke around the ear towards the back of the neck.

• Use the left ear comb guide for the finishing touches around the left ear.

• Use the right ear comb guide for the finishing touches around the right ear.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Conair Haarschneider Handbücher

Beliebte Haarschneider Handbücher anderer Marken

Clatronic

Clatronic HSM 800 Bedienungsanleitung

Mellerware

Mellerware MACRO ALDANY MA20001 Bedienungsanleitung

VALERA

VALERA X-Master 652 Bedienungsanleitung

Wahl

Wahl 1870Li Bedienungsanleitung

Remington

Remington HC5780 Bedienungsanleitung

Lister

Lister Legend Bedienungsanleitung

Philips

Philips HC5440/80 Bedienungsanleitung

Andis

Andis MBA 23125 Bedienungsanleitung

Philips

Philips Philishave HQC488/61 Bedienungsanleitung

Shear Magic

Shear Magic Nifty 1800 Bedienungsanleitung

Philips

Philips QC5390 Bedienungsanleitung

Andis

Andis US-1 Kurzanleitung

Panasonic

Panasonic EH-KA81 Bedienungsanleitung

Philips

Philips HC5450 Bedienungsanleitung

Andis

Andis US-1 Montageanleitung

Remington

Remington Classic HC450 Bedienungsanleitung

Andis

Andis ML Montageanleitung

O'Barber

O'Barber MINI SLIDE Bedienungsanleitung