Conair Infinity hair Designer 208 Benutzerhandbuch

Instruction & Styling Guide

For 208 Models

STRAIGHTENS •SHINES• CONTROLS FRIZZ• HEALTHY HAIR •VOLUME

06NP086 208 IB.indd 106NP086 208 IB.indd 1 3/22/06 4:04:37 PM3/22/06 4:04:37 PM

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be

followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

KEEP AWAY FROM WATER

DANGER – Any hair dryer is electrically live even when the switch is off. To reduce the risk of death or injury by

electric shock:

1. Always unplug appliance immediately after using.

2. Do not use while bathing or in a shower.

3. Do not place or store appliance where it can fall or be pulled into a tub or sink.

4. Do not place in, or drop into, water or other liquid.

5. If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING – To reduce the risk of burns, electrocution, ﬁre, or injury to persons:

1. This appliance should never be left unattended when plugged in.

2. This appliance should not be used by, on, or near children or by individuals with certain disabilities.

3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recom-

mended by the manufacturer.

4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has

been dropped, damaged, or dropped into water. Return the appliance to a Conair service center for

examination and repair.

5. Keep the cord away from heated surfaces. Do not pull, twist, or wrap line cord around dryer, even during

storage.

6. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the

air openings may be blocked. Keep the air openings free of lint, hair, and the like.

7. Never use while sleeping.

8. Never drop or insert any object into any opening or hose.

9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being

administered.

06NP086 208 IB.indd 2-306NP086 208 IB.indd 2-3 3/22/06 4:04:38 PM3/22/06 4:04:38 PM

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

10. Do not use an extension cord to operate dryer.

11. Do not direct hot air toward eyes or other heat-sensitive areas.

12. Attachments may be hot during use. Allow them to cool before handling.

13. Do not place appliance on any surface while it is operating.

14. While using the appliance, keep your hair out of it. Keep your hair away from the air inlets.

15. Do not use with voltage converter.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

This appliance is intended for household use only. Use on Alternating Current (60 hertz) only. Standard Dryers are

designed to operate at 110 to 125 volts A.C.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will ﬁt in a

polarized outlet only one way. If the plug does not ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt,

contact a qualiﬁed electrician. Do not attempt to defeat this safety feature.

IMPORTANT –

1875 WATT OPERATING GUIDE

Use of this dryer on the same circuit or fuse with other electrical products or appliances may trip a 15 amp circuit

breaker or blow a 15 amp fuse. NEVER replace the fuse with one rated higher than the capacity of the

circuit. Doing so could result in an electrical fire.

CHECK ALCI SAFETY FEATURE EVERY TIME YOU USE APPLIANCE.

This appliance is equipped with an Appliance Leakage Circuit Interrupter (ALCI), a safety

feature that renders it inoperable under some abnormal conditions, such as immersion in

water. To make sure the ALCI is functioning properly, perform the following test. The

purpose of this test is to allow you to make sure the water sensing system (ALCI) is

working.

1. Plug in the appliance and press test button on plug (See appropriate diagram below).

2. The appliance will stop working. There will be an audible click and reset button will

pop out.

Reset

Test

Reset

Test

06NP086 208 IB.indd 4-506NP086 208 IB.indd 4-5 3/22/06 4:04:39 PM3/22/06 4:04:39 PM

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

3. To reset ALCI with a reset button, unit should be unplugged. Then push reset button in, and reinsert plug

into outlet.

4. If ALCI is not functioning properly, return appliance to nearest service center.

5. It is important that if immersion occurs, this unit be brought to a service center. Do not try to reset.

6. Be sure to repeat test every time you use the unit to conﬁrm ALCI is operational. Should the appliance go off

and the reset button pop up during use, this could indicate a malfunction in the unit. Remove plug from outlet

and allow the appliance to cool. Reinsert plug into outlet. The appliance should then function normally. If not,

return to an authorized Conair Service Center for evaluation and repair.

SUPER STYLING GUIDE

Your best looks begin with a good haircut that’s well maintained. Always treat hair right with superior quality

shampoos, conditioners, and ﬁnishing products.

The Inﬁniti Hair Designer™by Conair®is an innovative, revolutionary styler that has effectively eliminated the hair

brush and brought salon quality results to your home.

DRYING BASICS

1. Shampoo and condition hair with products of your choice. Rinse thoroughly. Towel dry hair to remove excess

moisture. Using the dryer, start at a lower setting and direct hot air through a section of hair at a time. Move

dryer steadily across each section so that the hot air passes through hair. Direct air ﬂow at hair not scalp.

Clouds of negatively charged ions will help to reduce static electricity, control frizzy ﬂyaways and contribute to

your hair’s shine.

2. Keep dryer’s air intake vents unobstructed and free from hair while drying.

3. To avoid over drying, do not concentrate heat on any one section for any extended length of time. Keep dryer

moving as you style.

06NP086 208 IB.indd 6-706NP086 208 IB.indd 6-7 3/22/06 4:04:41 PM3/22/06 4:04:41 PM

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

4. For quick touch ups, between shampoos, dampen hair with a mist of water before styling with the dryer.

5. When using your dryer to create curls and waves, dry hair almost completely on the high temperature setting,

then ﬁnish styling with Cool Shot feature to close hair shaft and lock in style.

The professional Inﬁniti Hair Designer™by Conair®is very effective, even at lower temperatures, and helps to give

healthier-looking, shiny more manageable hair with maximum styling control.

BODY & VOLUME

To create extra volume, turn head upside down while drying. Position the air ﬂow toward the roots

for maximum lift. When hair is dry, toss head back and brush hair into place.

STRAIGHTENING

Work with hair in sections when creating a super straight look. Using the patent-pending Tourmaline

Ceramic™Straightening attachment, select a small section of hair and pass through each section to

smooth out curls and help control frizz. (See "How To Straighten Your Hair" section.)

MAKING WAVES

Tousled, natural-looking waves are easily created by grasping hair at the roots and scrunching

between ﬁngertips while drying. You can also order a Tourmaline Ceramic™soft tip diffuser for wavy

styles. See order form in back of this instruction booklet.

DRYER FEATURES:

1. Exceptional Power

Equipped with a powerful motor (1875 Watts) this hairdryer gives penetrating and quick drying results.

2. Tourmaline CeramicTM Technology

Ion output helps smooth the cuticle layer creating silky, shiny hair.

3. Ceramic Disk and Ionic Technology

Controls static electricity and also enhances the effectiveness of leave-in hair care. It facilitates your styling

and optimizes your hair’s shine and softness. It will be easier to style and shape your hair.

4. Unique Tourmaline Ceramic™straightening attachment with tension control

One easy step straightening process. Dry, detangle, straighten and shine hair for professional results.

5. A Professional Concentrator Nozzle

Ultra-slim, this concentrator guarantees optimal precision in styling your hair.

06NP086 208 IB.indd 8-906NP086 208 IB.indd 8-9 3/22/06 4:04:42 PM3/22/06 4:04:42 PM

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

Flocked disks add shine

Tourmaline Ceramic™

straightening plates

Detangling comb

Tension control system: 4 positions 1. Wavy hair

2. Curly hair 3. Very curly hair 4. Thick hair

Cool shot

button

2 speed/temperature

(High/Low) settings

Release lock buttons for attachments

Automatic

temperature

control

Tourmaline Ceramic™grill,

Ceramic Disk and Ionic Technology

Hinged air ﬁlter

Professional length cord

Controls frizz,

straightens and shines

Professional

Concentrator

1875 watts

DRY, DETANGLE, STRAIGHTEN AND SHINE IN ONE STEP

6. Release Lock Buttons

Secure attachments into place and allow 360° rotation to use the right angle for styling.

7. Automatic Temperature Control

Automatically recognizes the attachment used and adjusts the temperature and airﬂow for perfect

straightening or drying.

8. 2 Temperature Settings

Low Setting: this position combines ideal air ﬂow and temperature setting for shaping ﬁner, damaged or

treated hair.

High Setting: combines stronger airﬂow with higher temperature, especially recommended for pre-drying and

also for styling and straightening thick hair.

9. The ‘cool shot’ button

A shot of cool air at the end of straightening sets the style for a ‘long-lasting’ effect.

06NP086 208 IB.indd 10-1106NP086 208 IB.indd 10-11 3/22/06 4:04:44 PM3/22/06 4:04:44 PM

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

STRAIGHTENER ATTACHMENT FEATURES

1. A patent-pending triple-action

straightening attachment:

A. The Detangling comb guides your hair

for straightening.

B. Tourmaline Ceramic™straightening plates gently

straightens and conditions the hair.

C. Flocked disks add shine.

2. Rotating Position

To rotate positions of the attachment, press the two attachment release lock buttons on the

sides to the barrel of the hair dryer and adjust accordingly. Do not rotate attachments without

using release lock buttons as it could cause damage.

3. Tension Control System

There are 4 fundamental kinds of hair: wavy, curly, very curly, and thick. This unique

tension control system on the straightener attachment has been developed to feature

4 settings for every hair type. Its expertise lets it give The Inﬁniti Hair Designer™by

Conair®unrivalled performance thanks to this unique Tension Control System. This

patent-pending technology allows you to adjust the tension setting to suit each hair

type for perfect salon quality straightening results.

Wavy Hair Curly Hair Very Curly Hair Thick HairTension

Control Dial

06NP086 208 IB.indd 12-1306NP086 208 IB.indd 12-13 3/22/06 4:04:45 PM3/22/06 4:04:45 PM

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

4. Exclusive 360° rotating head

This exclusive system makes the appliance exceptionally comfortable to use. Now you can easily

style both the right and left sides, as well as hard to reach areas such as the back of your head.

Straightening very long hair, giving your bangs and roots body or ﬂipping the ends now becomes

simpliﬁed in one easy step.

STEP-BY-STEP STRAIGHTENING

PUTTING ON AND REMOVING THE ATTACHMENTS

1. Snap the straightener or concentrator attachment onto the barrel and rotate to lock into

desired position. There are 8 different locking positions.

2. To remove the attachment press the 2 attachment release buttons on the sides of the

appliance while gently removing the attachment.

3. Also use the release buttons when adjusting attachment angles.

HOW TO STRAIGHTEN YOUR HAIR

PREPARING YOUR HAIR

1. Carefully wash and comb out your hair.

Expert’s advice: Always start combing wet hair at the ends then slowly work your way up

towards the roots. Gentle combing prevents split ends from forming.

2. Towel dry your hair and pre dry using the Hair Designer set at the high setting, using the

concentrator if necessary. For best results, towel dry and ensure hair is not soaking wet

before using the straightening attachment.

Expert’s Advice: A: Whatever type of hair you have, start the pre-drying process by

bending at the waist, allowing your hair to fall forward to better lift the roots and give your

style volume. B: If, however, you prefer less volume, stand with your head straight to pre-

dry your hair.

Horizontal VerticalDiagonal A.

06NP086 208 IB.indd 14-1506NP086 208 IB.indd 14-15 3/22/06 4:04:47 PM3/22/06 4:04:47 PM

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

GETTING THE DRYER READY

1. Attach the straightener attachment.

2. Select the tension setting recommended for your hair type using the Tension Control Dial

located on the side of the straightener attachment. Expert's advice: The ﬁrst time you use

the attachment, set it at tension 4 (strongest tension) to familiarize yourself with the Inﬁniti

Hair Designer™

. Gradually decrease the tension setting until you ﬁnd the best setting for

your hair.

3. For best results, use the appliance set at high setting (Speed/temperature).

4. Using the release lock buttons set attachment at desired angle for professional, salon styling results.

Use CAUTION when changing settings while in use as straightening attachment tension control dial may be hot.

INFINITI HAIR DESIGNER™STRAIGHTENING TRIPLE ACTION STYLING PRINCIPLE

The patent-pending straightener attachment dries, straightens and shines your hair in just

one step. The unique principle integrates the 3 essential steps for perfect straightening results:

1. A detangling comb distributes your hair among the center Tourmaline Ceramic™

straightening plates.

2. Each Tourmaline Ceramic™center plate is then able to straighten efﬁciently using tension

to smooth out curls, eliminate static and control frizz.

3. The straightened hair is then given a shiny, polished ﬁnish as it passes through the ﬂocked disks.

HOW TO USE THE 360OROTATING HEAD ATTACHMENT

To carry out the 3 steps effectively, the straightener attachment rotates 360ointo 8 different positions. To change

the position, press the 2 attachment release lock buttons on each side of the barrel, turn the attachment, and then

release the buttons rotating the attachment until it ‘clicks’ into place. Do not

force rotation without using attachment release lock buttons.

Expert’s Advice: Ideally, the teeth of the detangling comb should be positioned

facing down and used on the hair ﬁrst: by using this position hair gets detan-

gled, is straightened and then shined for a silky, smooth, salon ﬁnish.

06NP086 208 IB.indd 16-1706NP086 208 IB.indd 16-17 3/22/06 4:04:49 PM3/22/06 4:04:49 PM

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNER™BY CONAIR®

LONG/SHOULDER LENGTH HAIR

1. Select the horizontal position for the straightener attachment.

2. Separate a section of hair about 1½" wide. Place the dryer (detangling comb facing down) at

the roots ensuring that the teeth of the detangling comb penetrate hair fully.

3. Hold ends of hair strand while straightening to keep hair taut and create tension for best

results.

4. With a slight twisting motion of the wrist, turn the appliance under and slide it slowly down

the length of your hair to smooth out curls underneath strand.

5. Repeat if necessary until strand reaches the desired level of smoothness. Finish with a cool

air shot to set style.

6. For smoother hair, concentrate heat and tourmaline, ceramic, ionic technology by slowly

straightening each strand. With this new technology, results will still be faster and easier than

using a traditional brush.

STYLING TIPS

Work in stages.

1. Section hair and clip-up the upper layers of hair on top of your head to begin with the hair

underneath and at the nape of the neck.

2. Move on to the hair at the back of your head and then on the sides.

3. Finish with the upper layers of hair. For best results, hold ends of selected strand to keep

hair taut while straightening. For straighter, sleeker strands slowly pass dryer with straightener

attachment through each strand. This concentrates heat and tourmaline, ceramic, ionic

technology on selected hair strand smoothing away curls and controlling frizz. For more volume,

glide dryer with straightener attachment more quickly through each strand.

Expert’s Advice: Smooth or volume straightening? To reduce the volume of thick or

voluminous hair, position the Inﬁniti Hair Designer™on top of the section of hair. If you want

more volume, place the Inﬁniti Hair Designer™underneath the section of hair to straighten

while lifting the roots for added volume.

06NP086 208 IB.indd 18-1906NP086 208 IB.indd 18-19 3/22/06 4:04:51 PM3/22/06 4:04:51 PM

Inhaltsverzeichnis

Sprachen:

Andere Conair Styling-Eisen Handbücher

Conair

Conair Instant Heat CS41CS Benutzerhandbuch

Conair

Conair Unbound CR510C Bedienungsanleitung

Conair

Conair CS3CS Benutzerhandbuch

Conair

Conair CB890QCS Benutzerhandbuch

Conair

Conair Infiniti CD110 Benutzerhandbuch

Conair

Conair Infinity S5 Benutzerhandbuch

Conair

Conair Shiny Straight CS7CSC Benutzerhandbuch

Conair

Conair Infinity S4 Benutzerhandbuch

Conair

Conair Unbound petite CR320C Bedienungsanleitung

Conair

Conair Curling Iron CB603CS Benutzerhandbuch

Conair

Conair RP150-H Bedienungsanleitung

Conair

Conair CS25 Benutzerhandbuch

Conair

Conair Infinity CD106PN Benutzerhandbuch

Conair

Conair HS10C Bedienungsanleitung

Conair

Conair Infinity CS32 Handbuch

Conair

Conair Infiniti INFCS25NCSC Benutzerhandbuch

Conair

Conair Unbound CR300C Bedienungsanleitung

Conair

Conair Tourmaline Ceramic CD127X Benutzerhandbuch

Conair

Conair CD80NCSC Benutzerhandbuch

Conair

Conair Instant Heat Benutzerhandbuch

Conair

Conair CS224 Bedienungsanleitung

Conair

Conair CS19VCSIB-9786 Benutzerhandbuch

Conair

Conair S1RCSC Benutzerhandbuch

Conair

Conair STRAIGHTENING IRON Benutzerhandbuch

Beliebte Styling-Eisen Handbücher anderer Marken

Vitek

Vitek VT-2505 Bedienungsanleitung

Morphy Richards

Morphy Richards IB22063 Produktinformationsblatt

TZS First AUSTRIA

TZS First AUSTRIA Ida FA-5670-3 Bedienungsanleitung

izzy

izzy LN-112 Bedienungsanleitung

Vitek

Vitek VT-2310 Bedienungsanleitung

Okoia

Okoia HS23 Bedienungsanleitung

Arzum

Arzum TRENDCARE AR 5042 Bedienungsanleitung

SOLAC

SOLAC PP7251 Bedienungsanleitung

VS Sassoon

VS Sassoon VSLE330A Bedienungsanleitung

Philips

Philips HP8339 Bedienungsanleitung

Philips

Philips HP4666 Bedienungsanleitung

Vitek

Vitek VT-8291 Bedienungsanleitung

VS Sassoon

VS Sassoon miniPRO Wave Envy Bedienungsanleitung

Arzum

Arzum SUPERSTAR TOUCH Bedienungsanleitung

Remington

Remington S2880ZBA Bedienungsanleitung

cecotec

cecotec Bamba RitualCare 900 Wet&Dry Max Bedienungsanleitung

Philips

Philips HPS950 Bedienungsanleitung

Andis

Andis Gold CSI-1E Bedienungsanleitung