CONCORD Eye-Q Go Wireless Bedienungsanleitung
ENGLISH ..................................................................................................1
FRANÇAIS ..............................................................................................23
DEUTSCH................................................................................................45
ITALIANO ................................................................................................67
ESPAÑOL................................................................................................89
PORTUGUÊS ..........................................................................................111
CONTENTS
Eye-Q Go Instr.Manual (English) 6/6/02 10:39 am Page 23
Congratulations on the purchase of your new
camera. Your camera has been carefully
engineered and manufactured to give you
dependable operation. Read this manual
before operating the camera to become more
familiar with it and obtain the performance
that will bring you continued enjoyment for
many years.
This manual has been written and formatted
with such depth and detail so you can
maximize the features of your camera, yet
easily follow the instructions.
1
CONGRATULATIONS
ENGLISH
Eye-Q Go Instr.Manual (English) 6/6/02 10:39 am Page 1
FCC INFORMATION
FCC WARNING: This equipment meets the limits for a class B digital device,
pursuant to Part 15 of FCC rules. Only the cable supplied with the camera should
be used. Operation with other cables is likely to result in interference to radio
and TV reception and could void the user’s authorization to operate this
equipment. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
•This device may not cause harmful interference.
•This device must accept any interference received, including interference that
may cause undesired operation.
Tested To Comply
With FCC Standards
for HOME OR OFFICE USE
Changes or modifications not expressly approved by the manufacturer may void
the user’s authority to operate this equipment.
USER INFORMATION
NOTE: This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment on and off, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver
•Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•Consult the dealer or a qualified technician for help.
2
IMPORTANT INFORMATION
Eye-Q Go Instr.Manual (English) 6/6/02 10:39 am Page 2
Be sure to observe the following precautions when using the camera:
•Do not take pictures or use the Internal LCD Display when
operating a vehicle or while walking.
•Do not open the case of the camera or attempt your own repairs.
Always leave service to authorized repair facilities.
•Keep the camera away from water and other liquids, and never let
it get wet. Never use when it is raining or snowing.
•Should foreign matter or water get into the unit, immediately turn
the power off and contact your local authorized service center.
•Physical damage and malfunction of this unit can cause the image
data stored in its memory to be deleted. Be sure to always keep
backup copies of data by transferring them to a personal
computer.
•Under an environment with electrostatic discharge, the camera
may malfunction and require the user to reset the camera.
•Do not leave the camera in places subject to extremely high
temperatures, such as a sealed vehicle or in direct sunlight.
•Remove the battery when the camera is not used for long periods
of time.
•Use 3V Lithium Battery (CR123A) only.
•Dispose of the battery in a manner that complies with applicable
laws.
•Do not place the camera in unstable locations where the camera
may fall and be damaged.
•Do not touch or press on the Status LCD Display or lens.
3
PRECAUTIONS
Eye-Q Go Instr.Manual (English) 6/6/02 10:39 am Page 3
1. Shutter Button
2. Viewfinder
3. Macro Switch
4. Battery Door
5. Capture/Review Switch
6. Self-timer LED
7. UV Filter and Lens
8. USB Connector Port
4
LOCATION OF CONTROLS
FRONT/TOP
1
2
3
4
5
6
7
8
Eye-Q Go Instr.Manual (English) 6/6/02 10:39 am Page 4
LOCATION OF CONTROLS (CONTINUED)
5
9. Status LCD
10. Diopter Adjustment Ring
11. Viewfinder/Internal LCD
Display
12. Up Button
13. Down Button
14. Lug for Neck/Wrist Strap
15. ON/OFF/Select Button
16. Self-timer/Delete Button
BACK
A. Battery Indicator
B. Macro Focus Indicator
C. Self-timer Indicator
D. Pictures Remaining Indicator
DISPLAY
10
13
14
11
12
15
16
C
D
9
A
B
Eye-Q Go Instr.Manual (English) 6/6/02 10:39 am Page 5
LOADING THE BATTERY
Before taking pictures, a fresh 3V (CR123A) Lithium
battery must be inserted into the unit.
1. Using your thumb, open the battery compartment
by pressing down on the battery door and
sliding it outwards as indicated by the arrow.
2. Insert a 3V (CR123A) Lithium battery. Make sure
to observe the polarity (+/–) as indicated in the
figure.
3. Close the battery compartment.
The camera has a battery indicator that shows the current battery level,
regardless of the mode the camera is in.
6
GETTING STARTED
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
1. Use only the size and type specified.
2. Be sure to follow the correct polarity when installing the battery. A
reversed battery may cause damage to the device.
3. If the device is not to be used for a long period of time, remove the
battery to prevent damage or injury from battery leakage.
FULL
Battery has full
power and is ready
to use.
LOW
Battery has low
power and will
need to be replaced
soon.
When battery is low, discontinue use and replace the battery.
Eye-Q Go Instr.Manual (English) 6/6/02 10:39 am Page 6
GETTING STARTED (CONTINUED)
7
TURNING THE CAMERA ON AND OFF
•To turn the camera on, press and
hold down the ON/OFF button ( )
until the Status LCD turns on.
•To turn your camera off, press and
hold down the ON/OFF button ( );
the Status LCD screen will turn
blank, indicating the unit has
powered off.
AUTO POWER OFF
In order to extend the battery life, your camera is equipped with an
auto-shut off circuitry that will automatically shut off the power when
the camera is left unattended or untouched for more than 30
seconds.
I
I
Eye-Q Go Instr.Manual (English) 6/6/02 10:39 am Page 7
TAKING PICTURES
8
1. Turn your camera on ( )
and make sure the review
switch is in CAPTURE mode.
( )
The review switch should be in
the position furthest away from
the shutter button.
2. While looking into the
viewfinder, press the SHUTTER
BUTTON until the LED in the
viewfinder stops blinking and
you hear the camera beep.
The PICTURE COUNTER will
subtract one from the total
number of pictures available.
IMPORTANT: Hold the camera steady until you hear the camera
beep and the LED stops blinking, which indicates that the picture
has been taken.
12
1
2
Eye-Q Go Instr.Manual (English) 6/6/02 10:39 am Page 8
Andere Handbücher für Eye-Q Go Wireless
7
Inhaltsverzeichnis
Sprachen:
Andere CONCORD Digitalkamera Handbücher
CONCORD
CONCORD EYE-Q MINI Installationsanleitung
CONCORD
CONCORD DUO 1300 Bedienungsanleitung
CONCORD
CONCORD EYE-Q MINI Bedienungsanleitung
CONCORD
CONCORD 3045 Bedienungsanleitung
CONCORD
CONCORD Eye-Q 1300 Bedienungsanleitung
CONCORD
CONCORD Eye-Q Go Wireless Bedienungsanleitung
CONCORD
CONCORD Eye-Q Go Wireless Bedienungsanleitung
CONCORD
CONCORD PZ2180 AF Bedienungsanleitung
CONCORD
CONCORD Eye-Q 3040AF Bedienungsanleitung
CONCORD
CONCORD Eye-Q Go Wireless Bedienungsanleitung
CONCORD
CONCORD Eye-Q 4060 AF Bedienungsanleitung
CONCORD
CONCORD Eye-Q 2100 Bedienungsanleitung
CONCORD
CONCORD Eye-Q Easy Too Bedienungsanleitung
CONCORD
CONCORD 3045 Bedienungsanleitung
CONCORD
CONCORD Eye-Q 3X Bedienungsanleitung
CONCORD
CONCORD Eye-Q DV Cam Bedienungsanleitung
CONCORD
CONCORD EYE-Q DUO Bedienungsanleitung
CONCORD
CONCORD Eye-Q Go Wireless Bedienungsanleitung
CONCORD
CONCORD Eye-Q Go Wireless Bedienungsanleitung
CONCORD
CONCORD Eye-Q Go 2000 Bedienungsanleitung
