Concourse SMART WHEELS Bedienerhandbuch
1
concoursegolf.com
SMART WHEELS
USER INSTRUCTION MANUAL
Version 7.0
concoursegolf.com 2
CONGRATULATIONS ON YOUR PURCHASE OF THE CONCOURSE GOLF SMART WHEELS.
Whilst designed to be simple and intuitive to operate, please read the charging instructions prior to
connecting to power for the very first time.
We also recommend you read and familiarise yourself with this User Manual prior to operation, to help you
get the most enjoyable ownership experience with your Smart Wheels.
User Instruction Manual | Version 7.0
User Instruction Manual | Version 1.71300 650 059 | concoursegolf.com
Product Registration ......................................................... 3
1.0 Equipment Check............................................................4
2.0 Charging Instructions ........................................................5
3.0 Connecting The Smart Wheels To Your Clicgear Push Buggy....................8
4.0 Connecting The Smart Wheels To Your CBM3 Push Buggy......................10
5.0 Connecting The Smart Wheels To Other Push Buggy Models ...................11
6.0 Removing your Smart Wheels ................................................12
7.0 Remote Control Mount.......................................................12
8.0 Remote Control Overview ...................................................12
9.0 Automatic Park brake ........................................................15
10.0 Optimised Turning ...........................................................16
11.0 Operating Speeds ...........................................................16
12.0 Software Updates ...........................................................17
13.0 Important Information .......................................................18
14.0 Warranty & Service ..........................................................19
CONTENTS:
3
PRODUCT REGISTRATION
To assist with any future software updates and expedite any service enquires throughout the lifetime of your ownership, please ensure
you register your Concourse Smart Wheel purchase online at www.concoursegolf.com
In the unlikely event you may need to complete any warranty returns, the following items will assist with swift service.
• Please retain the carboard box you received your Smart Wheels in for convienient return/shipping.
• Proof of Purchase – Receipt
For details regarding warranty return visit concoursegolf.com
IMPORTANT: TO MAXIMISE BATTERY LIFE PLEASE READ THE CHARGING INSTRUCTIONS (SECTION 2.0)
PRIOR TO CONNECTING TO A POWER POINT FOR THE FIRST TIME.
1.0 EQUIPMENT CHECK
SMART WHEELS AXLES CHARGER POWER
CABLE (PART 1)
SOFTWARE
UPDATE CABLE
CHARGER POWER
CABLE (PART2)
REMOTE CONTROL
CHARGING CABLE
REMOTE
REMOTE
CONTROL
MOUNT
CARRY CASE
REMOTE CONTROL
POUCH
OPTIONAL
concoursegolf.com 4User Instruction Manual | Version 7.0
2.1 Remove Smart Wheels from packaging and place face down.
2.2 Remove the two charger power cables )(2 parts) and connect
to each other as shown below.
2.3 Now connect corresponding charging sockets to each wheel.
Ensure these cables are firmly connected to the wheels and
charger power cables connected before connecting to the
power point in step 6.
2.0 CHARGING INSTRUCTIONS FOR WHEELS & REMOTE
concoursegolf.com 5User Instruction Manual | Version 7.0
1 2
ENSURE BOTH WHEELS
ARE CONNECTED
If you have purchased the
optional Travel Case and are
familiar with the charging
process you may connect and
charge the wheels in the Travel
Case.
3 4
5 6 7
IMPORTANT: DO NOT CONNECT
CHARGER TO POWER UNTIL BOTH
CHARGER POWER CABLES ARE
CONNECTED TO THE WHEELS .
IMPORTANT: PLEASE ENSURE BOTH THE WHEELS AND REMOTE ARE FULLY CHARGED AND KEPT ON CHARGE AT ALL
TIMES BETWEEN ROUNDS OF GOLF. ONLY REMOVE THE CHARGER FROM THE WHEELS WHEN YOU ARE READY TO
PLAY. AVOID PARTIAL CHARGING, WHICH MAY AFFECT LONG TERM BATTERY LIFE.
CHARGING FULL CHARGE
2.4 You may now connect the charging unit to a Power Point and
begin charging for the first time. You will notice an LED light just
below the wheels charging point that should appear RED when
charging begins, and then turn GREEN once the wheels are fully
charged.
2.5 Remove the remote control unit from it’s packaging and
connect the USB charging cable. Now connect the Remote USB
Charging Cable to a USB Charging Port .
Whilst this can be done via a computer’s USB, it is
recommended to use a USB charger that connects directly to
mains power for the most effective and quickest charge.
concoursegolf.com 6User Instruction Manual | Version 7.0
1 2 3
IMPORTANT: ONCE BOTH YOUR WHEELS ARE FULLY CHARGED AND A GREEN LED IS
SHOWING ON BOTH WHEELS, FIRST TURN OFF THE CHARGER AND THEN REMOVE THE
POWER LEAD FROM THE OUTLET BEFORE DISCONNECTING THE WHEELS.
FULL CHARGE
(LIGHT TURNS GREEN)
CHARGING
2.7 Once both your Smart Wheels and remote are fully charged
please follow the disconnection instructions below very carefully.
DISCONNECTING THE CHARGER
2.6 When charging begins, you will notice the middle light on the
remote illuminate to Red indicating charging is in process. Once
the remote is completely charged the light will turn green.
When you disconnect the remote, it will automatically switch off
along with the green light.
concoursegolf.com 7User Instruction Manual | Version 7.0
1 2 3
3.0 CONNECTING THE SMART WHEELS TO A CLICGEAR BUGGY
MOST CLICGEAR MODELS
PUSH MODELS ONLY
19MM RING
SPANNER REQUIRED
3.1 Position your buggy in a safe manner then remove the
original Clicgear buggy wheels by unscrewing the lock-
nut. Please ensure you use a 19mm Ring spanner to avoid
damaging the nut.
3.2 Locate the 2 metal Smart Wheel axles – Left and Right are
the same and fit on either side. You will notice for Clicgear
buggies the axles are attached using a lock nut.
3.3 Connect both Smart Wheel axles to your existing push
buggy where you removed the original buggy wheels
from as indicated below.
concoursegolf.com 8User Instruction Manual | Version 7.0
3.4 The Smart Wheels are labelled Left and Right.
Left and Right of the buggy is determined by standing behind
the buggy holding the handle as you would do during play.
Now pick up one wheel and guide it onto the Axle already
connected to your buggy. To avoid excess dirt clogging the
charging socket it is recomended to position the charging
socket at the highest point from the ground as you slide the
wheel into positon. Press the red button on the outside of the
wheel as you guide it onto the axle. Release the red button
when the wheel is in position.
3.5 To ensure each Smart Wheels is securely locked in place you
may need to slightly rotate (up to ¼ turn) so the raised point
on outside of the axle neatly slots into the corresponding
indentation on the hub of the wheel.
This ensures the central hub of each Smart Wheel locks in place
and does not free-wheel.
Once both wheels are connected in the same manner they will
be able to drive the buggy.
2
1
SECURELY LOCKED IN POSITION
concoursegolf.com 9User Instruction Manual | Version 7.0
4.0 CONNECTING THE SMART WHEELS TO YOUR CBM3 BUGGY
As an owner of the Concourse CBM3 Push Buggy you will not need to fit different axles (as opposed to other push buggy models).
The Smart Wheels will connect directly to the CBM3 axle, however, you do require locking pins to secure the central hub of the
Smart Wheels so the outer drives your buggy.
Before installing the CBM3 axle locking pins, please ensure you position your buggy in a safe and stable manner then remove the
two large free spinning wheels.
4.1 Enclosed you will find two locking pins and a 3mm allen key
as shown below.
4.2 You will notice a hole [also shown below] to thread the
locking pin screw through using the allen key.
4.3 Remove the original buggy wheels. Hold the locking pin,
then using the allen key thread the locking pin screw on
smoothly until it’s secure and tight. Repeat this process with
the opposite side of the CBM3 buggy.
4.4 The Smart Wheels are labelled Left and Right.
Left and Right of the buggy is determined by standing behind
the buggy holding the handle as you would during play.
Now pick up one wheel and guide it onto the Axle already
connected to your buggy. To avoid excess dirt clogging the
charging socket it is recomended to position the charging
socket at the highest point from the ground as you slide the
wheel into positon. Press the red button on the outside of the
wheel as you guide it onto the axle. Release the red button
when the wheel is in position.
4.5 To ensure each Smart Wheels is securely locked in place you
may need to slightly rotate (up to ¼ turn) so the raised point
on outside of the axle neatly slots into the corresponding
indentation on the hub of the wheel.
This ensures the central hub of each Smart Wheel locks in place
and does not free-wheel.
Once both wheels are connected in the same manner they will
be able to drive the buggy.
1 2
LOCKED IN POSITION
3
concoursegolf.com 10 User Instruction Manual | Version 7.0
PLEASE NOTE: THE LOCKING PINS WILL SUIT EITHER SIDE OF THE BUGGY. THE SMART WHEELS ARE LABELLED LEFT
AND RIGHT, WHICH IS DETERMINED BY STANDING BEHIND AND HOLDING THE HANDLE AS YOU WOULD DURING
PLAY.
Andere Handbücher für SMART WHEELS
4
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Concourse Golftrolley Handbücher
Concourse
Concourse SMART WHEELS Bedienerhandbuch
Concourse
Concourse CBM2 Gebrauchs- und Pflegehandbuch
Concourse
Concourse CBM3 Bedienungsanleitung
Concourse
Concourse CBM3 buggy Gebrauchs- und Pflegehandbuch
Concourse
Concourse Vogue Bedienerhandbuch
Concourse
Concourse CBM3 BUGGY Bedienungsanleitung
Concourse
Concourse TRAVEL GUARD CBM3 Bedienungsanleitung
Concourse
Concourse VOGUE PUSH BUGGY Bedienerhandbuch
