Coniu Go GL865 Bedienungsanleitung
Dear customer,
this is a short description to give you some basic informa-
tions about the GSM modem you purchased.
Informations to the AT commands you will find on the CD
as a PDF file. As well informations can be downloaded
from our website www.coniugo.com. Those documents
can be read and printed with the Adobe Acrobat Reader.
GPRS GSM modem: modem module GL865
UMTS/HSPA- modem: modem module UL865
LTE modem: modem module HE910
2
Introduction / Declaration of Conformity
=
Thank you for buying the ConiuGo GSM/GPRS-modem. This product was produced
according to the latest technology. It is a device suited for data transmission in GSM
networks
The manufacturer is:
ConiuGo® GmbH
Berliner Strasse 4A
16540 Hohen Neuendorf
This product is labelled with the CE-mark according to following standards:
EU-guidelines 73/23/EWG of February 19th 1973, EU-guidelines 89/336/EWG of
May 3rd 1989 (EMV-guideline) changed by EU-guidelines 91/263/EWG,
92/31/EWG, 93/68/EWG, EU-guidelines 89/392/EWG of June 14th 1989 changed by
EU-guidelines 91/368/EWG, 93/44/EWG, 93/68/EWG
EN 61000-6-4/01 German basic standard for RF-emission for industrial application,
EN 61000-6–2/05 German basic standard for RF-immission for industrial application
This product is manufactured according to the quality standard DIN EN ISO 9001.
This product includes a GSM transceiver unit from a third-party manufacturer. It is
CE-certified by it’s own manufacturer.
=
=
To ensure a safe operation of the modem, please read this ma-
nual carefully before taking it into operation
Hohen Neuendorf, August 2015
3
Table of contents
=
1. Limited Warranty / Limitation of Liability...............................................4
2. Use as agreed ...........................................................................................5
3. Safety notes ..............................................................................................6
4. Description of the modem .......................................................................7
5. Installation of the modem........................................................................7
6.
Electrical installation ............................................................................7
7. Insert the SIM- card ..................................................................................8
9. Setup of a modem- connection.............................................................16
10. Examples for basic AT- commands...................................................16
11. Troubleshooting ...................................................................................17
=
4
1. Limited Warranty / Limitation of Liability
ConiuGo GmbH warrants its product to be free from defects in materials and work-
manship under normal use and service for a period of two years from the date of de-
livery, if no other agreement was made. The warranty is limited to the repair or re-
placement, at ConiuGo`s sole option. The costs of parts and labour are covered in
case of a repair. Costs for mounting and de-mounting, as well as for return transport
to ConiuGo GmbH are not covered.
This limited warranty will apply only to ConiuGo GmbH products that exhibit normal
use and service and will not cover any damages resulting from any misuse, modifi-
cation, disassembly or alteration. Proof of purchase must accompany the product re-
turned for consideration under this warranty.
Any use of the modem is carried out at your own risk. In no event shall ConiuGo be
liable for incidental or consequential damages, including, without limitation, loss to
property other than the ConiuGo GmbH product, loss of the use of the ConiuGo
GmbH product or other property, or other economic loss.
Damages resulting from neglect of this manual are not covered
by the warranty. ConiuGo GmbH is not liable for any conse-
quential damage.
ConiuGo is not liable for damages to property or personal inju
-
ries resulting from improper use or neglect of the safety war-
nings. Such events are not covered by the warranty.
5
2. Use as agreed
=
The modem is designed for use in Germany and the European Community. Accor-
ding to the rules of CE-conformity, it is not allowed to distribute this device without a
manual in the national language. The manual has to be authorised by the manufac-
turer. Any distributor has to make sure that the user of the device is capable to un-
derstand the manual as regards the content and the language.
The modem has to be installed and put into operation by com-
petent technicians.
The modem is designed according to the valid GSM standards. At the use of this
modem all safety precautions necessary for GSM devices have to be taken into
account. It is not allowed to switch on the modem in airplanes or hospitals. Please
check carefully any possible influences the modem may have on other technical and
electronic devices.
The modem has to be installed and put into function by technical experts. All notes
and information of this manual have to be read carefully and followed strictly. In case
of doubt don’t put the device into function but consult the manufacturer or your au-
thorised distribution agent.
GSM devices are able to ignite explodable or inflammable gases by electromagnetic
radiation. The use of the modem in an environment with a potential for these condi-
tions must be definitely excluded.
Because of the RF-radiation of a GSM device the modem has to be used with a
suitable GSM antenna for the RF band of 900 MHz (or 1800 MHz depending of the
type of the chosen GSM network). The antenna cable has to be free from any dama-
ges.
Safety hints have to be regarded!
6
3. Safety notes
The modem corresponds to broadly valid GSM standards. At the use of a GSM
transceiver for the mobile communication, certain safety precautions have to be
made.
GSM products can ignite explosive or inflammable gases.
The use of the modem in an environment with a potential for these conditions must
be definitely excluded.
The system must be switched off in airplanes or hospitals.
The system must be switched off in cars or vehicles, because
an irritation of car electronics be RF radiation is possible.
Before connecting the product, possible interference of the
modem on your existing technical equipment has to be in-
quired.
The manufacturer provides a product for integration in a technical assembly. The
product is tested carefully according to the CE-certification to meet the standards
mentioned in the Declaration of Conformity. Nevertheless, the electromagnetic be-
haviour of the modem is depending on the conditions of mounting and environment.
The electromagnetic behaviour of the m
o
dem depends on the
environmental not controlled by the manufacturer. Any liability
for eventual electronic misbehaviour is excluded.
Because of the RF
-
radiation of the GSM unit the modem has to
be used with a suitable GSM antenna for the RF band, depen-
ding on the type of the chosen GSM network). The antenna ca-
ble has to be free from any damages.
7
4. Description of the modem=
The modem is a GSM modem for data-, fax- and SMS- transfer in GSM networks.
From the moment the modem is booked into the provider’s network the device be-
haves like a standard modem or a fax modem. The configuration of the system is
carried out via the V.24 serial port resp. the USB-connection. For programming the
standard AT-commands according to ETSI-standards (ETSI 07.07 or ETSI 07.05)
are used.
The modem is dedicated to applications several GSM networks and depends on the
core module that is indicated on the product label (Dualband: 900/1800 MHz, Quad-
band: 850/900/1800/1900 MHz, UMTS: with 2100 MHz).
=
5. Installation of the modem
=
The modem must be installed only in dry places. The allowed range of temperature
is –30 to +60 °C. The common regulations for electrical installations have to be re-
garded.
The modem is allowed to be run according to the following conditions:
•Ambient temperature: –30 to +60 °C
•Indoor use only, max. 70% RH
•SIM-card with appropriate service subscription (e.g. for data transmission:
subscription for data transmission).
•GSM/GPRS GL865, recommended and preset baudrate is: 8N1 / 38.400
•UMTS UL865, recommended and preset baudrate is 8N1 / 115.200
•LTE LE910, recommended and preset baudrate is 8N1 / 115.200
6. Electrical installation
Power supply
This information is given by the product label.
Connection
LAN / Ethernet- Port, 2 LED as indication for the communication with the
network.
8
Antenn
MMCX-, FME- or SMA- Coaxial connector (depending on modem version)
7. Insert the SIM- card
Make sure that you have a SIM-card activated for all required services (e.g. CSD
data call with a separate calling ID)
Place the Modem-unit as shown and insert the SIM-card into the SIM-card reader.
Note that the contacts of the SIM card have to be placed upside. Do not touch the
connectors of the SIM card with your fingers. It can lead to contact problems or
damage from static discharges.
Abb.1 Abb.2=
=
=
9
8. Configuration of the LAN- Port
=
When delivered the LAN- modem is pre-configurated and the LAN- port is addressa-
ble with the following IP- setting:
IP-addresse: 192.168.1.100
Subnet- maske: 255.255.255.0
Port: 10001
All network- an functional- settings are accessible to be changed according to the
needs of a user-case:
Two ways for changes are possible:
1.) Configuration by using a webinterface
Please use the IP- address oft he device in your browser (e.g. the IP- address
192.168.1.100)
http://192.168.1.100
No user name and password are neccessary. Please directly press „OK“
When delivered the LAN- modem is pre-configured as follws:
10
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Coniu Go Steuereinheit Handbücher
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
