Conlan PR 1000 Bedienungsanleitung

Proximity Reader

PR 1000

Art. No.: 460101 & 460108

User's Manual

PR1000v.2 User Man. ENGjun11

Page 2 PR 1000

Introduction

PR 1000 is a flexible proximity reader for a lot of application: At normal work the yellow LED is lit (the left one).Activation by a confirmed

transponder/card, the yellow and the green LED are lighting for the activation time. If not confirmed... the red LED is

lighting shortly. There is a buzzer integrated also for indication, either confirmed/not confirmed transponder/card

(2 different sounds). Additional the buzzer can be activated directly by GND on the brown wire.

The transponders/cards (TR) are stored in positions from 1 to 1000. At delivery all positions

are empty. The first TR shown after power up will be the Master Transponder (MT).

The next shown will be Control Transponder (CT). Now the proximity reader is for

programming(see page 3 for reset the PR 1000) User Transponder (UT).

Transponder(cards for PR 1000

Position:

Transponder:

Name:

Position:

Transponder:

Name:

UT 1

UT 2

UT 3

1000

Programming the Transponder/cards (TR) im

pulse

Show MT 1 time (yellow LED is flashing) (the proximity reader is now in programming mode), show a new TR, will be confirmed by

sound and flashing. Show the next etc. - there is space for 1000 TR. All TR will be stored from position 1 and the following numbers up.

The time up for programming mode is approx. 10 seconds after every programming. The programmed transponder will activate the

output for approx. 5 seconds (impulse).

Programming the Transponder (TR)

toggle

Show MT 2 times after each other (MT2) (green LED flashing). Show a new TR, will be confirmed by sound and lighting. The TR

programmed will activate the output as a toggle. The positions can be mixed up for either input/toggle TR's. All TR will be programmed

on the first free space in the positions.

Delete TR:

Show MT 3 times (red LED flashing). Show the TR/TR's you wish to delete. That/those positions are now free..

Delete a TR not present:

Show MT 4 times (green and red LED flashing). Show the transponder programmed just before that TR you want to delete e.g.: TR 12

has to be deleted. MT 4 times - show TR from position 11 and TR 12 is now deleted. Position 12 is now free e.g. 2: Delete TR 13 - MT 4

times - show TR from position 11 etc. NB: All new programmed TR will be stored on the first free space.

Delete TR on position 1:

Show MT 5 times (all LED flashing). TR on position 1 is now deleted.

Installing your new PR 1000 Proximity Reader:

Wire color

Inst - Prox

Function

Description

Red

+12 V DC

Supply, 9 –15 V / 100 mA

Black

0 V, GND

Supply

Yellow

Open collector output, 500 mA.

0V active

Output for door opening, relay, alarm etc.

Green/white

Sabotage loop

Short cut in the reader

Brown

0V active buzzer/Hold

Extern controlling/Hold function

Orange

0V active red LED

Extern controlling

Blue

0 V active, for REX button.

REX-time as for pulse.

Output for door opening, relay, alarm etc.

User's Manual Page 3

Advanced options in the PR 1000 Proximity Reader:

Generally it is the installer who is setting up the parameters/programming of the proximity reader.

Reset the PR 1000

Make a short cut between the yellow and the brown core. Connect the power. Remove the short cut. Now the proximity reader is back in

factory default. No MT, CT or TR is active. All is reset. Yellow LED is flashing. The first TR shown will be the MT. The next TR shown

will be CT. PR 1000 is now ready for programming the User Transponder (transponders up 1000 pcs).

Set up by the Control Transponder (CT):

CT can be used in configuration to the MT and all parameters can be set up as the following:

Configuration of the Proximity Reader:

Description

Indication*

Action

Indication

Action

Programming

New value

Ø O O

CT1

-- Ø Ø

Buzzer on/off, repeat

On = Ø, Off = O

-- Ø Ø

CT2

-- -- --

Shift Locked Indication 1-8,

repeat MT to choose

1 –8, see the LED

indication 1 –8

-- -- --

CT3

-- -- --

Shift Unlocked Indication 1-8,

repeat MT to choose

1 –8, see the LED

indication 1 –8

-- -- --

CT4

-- Ø O

Not in function for PR 1000

-- Ø O

CT5

-- Ø Ø

Toggle open collector 2 polarity ’—’:

Ø = invert, 0 = not invert

-- Ø Ø

CT6

-- O Ø

Not in function for PR 1000

-- O Ø

CT7

-- Ø Ø

Set open collector output time

Time between CT7 and MT is

impulse time. 0 = toggle

-- Ø ø

CT8

Ø Ø Ø

Save and exit

All the chosen parameters will be

saved and in function.

ø ø ø

CT9

Exit without save, same as time up

*: Explanation to the indications: LED indication: (default: Yellow for locked, yellow and green for unlock).

Indication

Yellow LED

Green LED

Red LED

Ø O O

Off

-- Ø Ø

Different

-- Ø O

Different

Flash

Off

Ø Ø Ø

Flash

Examples for some settings:

Save new set up: CT8 - MT.

Leave programming without saving: Wait for time up. LED goes back to normal lighting.

Examples:

UT = User Transponder. UT1 = User Transponder 1 etc.

Example 1:

MT1, UT1, UT2, UT3: 3 User Transponders are now programmed (for impulse). Placed in position 1 to 3.

Exaples 2:

MT1, UT1, UT2, MT2, UT3, UT4: 2 User Transponders are now programmed (for impulse) and 2 for toggle.

Example 3:

MT1, MT2, MT3, UT3: User Transponder 3 is deleted.

Example 4:

CT2, MT3: LED lighting for normal use is now changed to no. 3(as shown on the proximity reader) CT4, CT5, CT6, CT7, CT8 and MT -

then the setup is saved in the reader.

Specifications:

Voltage:

+ 9 –15 V DC, 100 mA.

Output (yellow core):

max. 500 mA.

Extern controlling buzzer and red LED

Extern controlling buzzer, Hold and lock

Operating temperature:

-30° C til + 80° C.

Humidity:

100%, IP67.

Color:

Black, optional white.

Dimensions (H x W x D):

130 x 50 x 8 mm.

Cable:

2,5 m, 8 core.

Page 4 PR 1000

Quick Guide to PR 1000:

How to program the Master- and Control Transponder

Present the first TR on

the Prox spot. A beep

sound can be heard

and the first TR is now

programmed as the

Master Transponder.

Now present the second

TR on the Prox spot. The

reader responds with a

beep sound and the

second TR is now

programmed as the

Control Transponder.

After programming the Master

and the Control Transponder

wait approx. 10 seconds and

the reader is back to normal

mode.

How to program a user Transponder (with impulse)

Present your Master

Transponder 1 time on

the Prox spot. The

reader is now ready to

program user

Transponders.

Present a Transponder on the

Prox spot. To add more user

Transponders, repeat this

step.

After programming the user

Transponders wait approx.

10 seconds and the reader is

back to normal mode.

How to program a user Transponder (as toggle)

Present your Master

Transponder 2 times

on the Prox spot. The

reader is now ready to

program user

Transponders.

Present a Transponder on the

Prox spot. To add more user

Transponders, repeat this

step.

After programming the user

Transponders wait approx.

10 seconds and the reader is

back to normal mode.

How to delete a user Transponder

Present your Master

Transponder 3 times

on the Prox spot. The

reader is now ready to

delete user

Transponders.

Present the Transponder

on the Prox spot you want

to delete. To delete more

user Transponders, repeat

this step.

After you have deleted

those user Transponders

you wished to delete wait

approx. 10 seconds and

the reader is back to

normal mode.

How to delete a defect/lost user Transponder

Present your Master

Transponder 4 times

on the Prox spot. The

reader is now ready to

delete a defect or lost

user Transponder.

Present the user

Transponder which is one

position lower than the

lost user Transponder on

the Prox spot (e.g. the

user Transponder on pos.

12 is missing, present

user Transpooinder from

pos. 11).

After you have deleted

those user Transponders

you wished to delete wait

approx. 10 seconds and

the reader is back to

normal mode.

How to delete the Transponder on position 1

Present your Master

Transponder 5 times

on the Prox spot and

the Transponder on

position 1 is now

deleted.

Wait approx 10 seconds

and the reader is back

to normal mode.

Thank you, for choosing Conlan's porducts.

Please contact our support service for further

information whenever needed..

Andere Conlan Kartenleser Handbücher

Conlan

Conlan Prox P1000 Bedienungsanleitung

Conlan

Conlan M1000 Bedienungsanleitung

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Rosslare

Rosslare DR-6255 Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch