Connect IVS 2000 Bedienungsanleitung
CHAPTER 1
To Originate an Outside Call
To Originate an Internal Call
Outside Line Appearance
To Originate a Call Using One-touch
Buttons
Automatic Idle Return
To Originate a Call Using Speed
Calling (Individual Station)
Account Code
Forced Account Code
Authorization Code
CHAPTER 2
Voice First/Tone First
Originating a Voice Call
Answer a Voice Call Hands Free
Automatic Intercom
Manual Intercom
Dial Intercom
To Place a Call on Hold
To Place a Call on Exclusive Hold
To Transfer A Call
CHAPTER 3
Conference
To Establish a Broker Call
Call Back (Station)
To Answer a Camped-on Call
To Set Camp-On
(Transfer Method)
Camp-On
(Call Waiting Method)
Call Park (System)
Call Pickup (Group)
Call Pickup (Direct)
Outside Line Queuing
(From Extension Dial Tone)
Timed Queuing
(Outside Line Only)
Executive Override
CHAPTER 4
Last Number Redial
Call Forwarding All Calls
Call Forwarding Busy
Call Forwarding No Answer
Call Forwarding-Destination
To Save and Repeat a Number
Internal Zone Paging with
Meet-Me Page
CHAPTER 5
Boss/Secretary Calling
Boss/Secretary Override
Do Not Disturb
Timed Reminder
Privacy Release
Return Message Schedule
Name Display
Feature Access Code
(Factory Assigned)
8-Button Dterm
8-Button Dterm w/o LCD
16-Button Dterm
32-Button Dterm
Microphone On/Off
Select Ringer Tone
Adjust Ringer Tone
Preset Ringer Volume
Adjust Transmission/Receiving Volume
Microphone On/Off
The MIC lamp shows the status of the built-in microphone.
To change microphone status:
•Press Soft Key associated with the MIC Display or press Feature and 1.
To select ringer tone
The Dterm Series E has 3 kinds of ringer tones that you can select.
•Press Feature and 3. The LCD displays the selected tone number (n=1 ~ 3).
Tone No.
Frequency
(Hz)
Modulation
(Hz)
1
480/606
16
2
480/606
8
3
1285/1024
16
To adjust ringer tone
NOTE: Access to feature is based on data assignment.
•Press Feature and 0. Ringer activates.
•Press 3. The LCD displays the selected tone number (n=1~3).
•Press 3. Next tone is selected.
To preset ringer volume
NOTE: Access to feature is based on data assignment.
•Press Feature and 0. Ringer activates.
•Press down or up Key. Ringer volume decreases or increases.
•Press Feature Key to stop ringing.
To adjust transmission/receiving volume (During valid call)
•Press Feature and 4. The Transmit Volume increases.
•Press Feature and 4again. Transmit Volume returns to normal.
•Press down or up. Receive Volume decreases or increases.
Function Keys
Programmable Keys
Soft Keys
Lamps
Feature Key Activities
Function Keys
Hold
Press key to place an internal or external call on hold.
Transfer
Allows the station user to transfer established calls to another station,
without attendant assistance.
Answer
When LED on this key is lighted, press key to answer a waiting call.
Speaker
Controls the built-in speaker which can be used for Hands Free
dialing/monitoring. LED on key lights when key is active.
Redial
Press key to activate redial feature. Press redial and scroll back through
numbers that have been dialed. Until the desired number is displayed.
Press the * key to activate dialing.
Conf
Press key to establish a three-way conversation. LED on key lights when
key is active.
Recall
Press key to terminate established call and resieze internal dial tone.
Feature
Used to activate terminal setup functions and to program One-Touch
Speed Dial/Feature Keys.
UP/DOWN
Used to adjust LCD contrast, speaker/receiver volume, and ringer volume.
LCD Contrast:
Press up or down key while idle.
Speaker/Receiver Volume:
Press up or down key during conversation.
Ringer Volume:
Press up or down key during ringing.
Programmable Keys
These are examples of Dterm® features available by pressing the programmable
keys. Some features may be programmed by the user. Keys must be
programmed by the telephone system administrator.
AICM
Press key to activate Automatic Intercom.
CB (Call Back)
Press key to activate.
DICM
Press key to activate Dial Intercom.
DND (Do Not Disturb)
Press key to activate or cancel Privacy feature.
FD-A (Call Forwarding- All Calls)
Press key to activate or cancel Call Forwarding - All Calls feature.
FD-B (Call Forwarding- Busy)
Press key to activate, verify, or cancel Call Forwarding - Busy feature.
FD-N (Call Fowarding- No Answer)
Press key to activate, verify, or cancel Call Forwarding - No Answer
feature.
FD-DS (Call Fowarding- Destination Set)
Press key to activate, Call Forwarding - Destination.
FD-DC (Call Fowarding- Destination Cancel)
Press key to deactivate, Call Forwarding - Destination.
MICM
Press key to activate Manual Intercom.
S&R (Save and Repeat)
Press key to store a number or redial a stored number.
SECONDARY APPEARANCE (Sub line)
A programmable extra extension key, other than Primary extension.
Press key to see status of extra extension.
Soft Keys (Factory Assigned Features)
Headset
Press the Soft Key below "Headset" to activate or deactivate Headset
operation.
Mic (Microphone)
Press the Soft Key below "Mic" to activate or deactivate the Microphone.
The Mic LED will illuminate when Mic is on.
Help
Press the Help Key. Press desired Soft Key for helpful information about
that key.
Exit
Press the Exit Key to exit the Help program.
OHROFF (Off Hook Ringing Off)
It will disable ringing on this phone while in use.
OHR-ON (Off Hook Ringing On)
It will allow ringing on this telephone while in use.
On Hook State
(Telephone is idle)
Off Hook State
(Telephone is in use)
To Use Soft Keys
Four soft keys are indicated in the LCD According to the status of the Multiline
Terminal.
oPress the SCROLL (>>>>) key to scroll the desired key if there are
other functions available.
oPress a desired key under the indicated 4 Soft Keys on the LCD.
oThe service feature of the pressed Soft Key is operated.
To Use The Help Key
oPress the HELP key and the Soft Key.
oExplanation of the pressed Soft Key is indicated on the LCD.
oPress the EXIT key to leave Help.
Lamps
Call Indicator Lamp
Lamp at top corner of Dterm Display flashes when a call terminates to the
terminal. Lamp lights steadily when a message has been left.
LCD
Liquid Crystal Diode (LCD) display provides Dterm activity information plus
date, time and Soft Key operation.
LED
Some function keys have a built-in Light Emitting Diode (LED) that lights
or flashes according to the activity of that function key.
MIC (Microphone) Lamp
Lamp displays the status of the built-in microphone used for hands free
operation.
Feature Key Activities
Feature + 1 = Turns microphone on or off.
Feature + 3 = Selects ringer tone.
Feature + 4 = Adjusts transmission/receiving volume.
Feature + 0 = Activates ringer. (dependent on Systems Programming.)
Originate an Outside Call
Account Code
Originate an Internal Call
Forced Account Code
Outside Appearance
Authorization Code
Originate a Call Using One-Touch
Buttons
Originate a Call Using Speed Calling
(Idividual/ System)
Automatic Idle Return
TO ORIGINATE AN OUTSIDE CALL VIA EXTENSION LINE KEY
•Lift handset or press Speaker key, receive dial tone.
•Dial the Central Office access code, e.g. 9.
•Dial desired telephone number.
•Use handset or MIC to converse.
TO ORIGINATE AN INTERNAL CALL
•Lift handset or press Speaker key.
•Receive dial tone.
•Dial desired station number.
•Use handset or MIC to converse.
OUTSIDE LINE APPEARANCE
To originate:
•Press the OUTSIDE LINE APPEARANCE feature key.
•Lift handset or press Speaker, receive Central Office or distant PBX dial tone.
•Dial the destination.
To Answer:
•Press the LINE APPEARANCE feature key (ringing and flashing LED alert user
to incoming call.)
•Lift handset or press Speaker.
•Speak with incoming party.
TO ORIGINATE A CALL USING ONE-TOUCH BUTTONS
NOTE: With DTP-32D
•Press desired Speed Call button, or press Speaker and Speed Call.
To program:
(Available only on Dterm stations with speed calling keys.)
•Press Conf button. Conf flashes
•Press desired One-Touch button, Speaker button LED lights steady.
•Enter desired station number, feature code or outside access code and telephone
number. Display indicates digits dialed.
•Press Conf again to save the number.
To verify:
•Press Conf button.
•Press desired One Touch button.
•Display indicates digits programmed.
Inhaltsverzeichnis
