Connectiviot CT-SW01 Bedienungsanleitung
WIFI Smart Switch User’s Manual
Model: CT-SW01
Smart Switch Device
Smart Switch Device Layout
①LED Indicator
②On/Off Switch
Technical Information
Voltage: 100V-240V
Max Current: 5A
WiFi: 2.4GHz 802.11.b/g/n
Security: Open/WEP/WPA2
Installation
Download Smart Switch Application
- Search and download the Smart Switch application from Android Google
Play Store
Set Up Smart Switch Device
Set Device to Set Up Mode
1. Press and hold power switch while plug it into wall socket.
2. Wait until LED indicator blink purple light fast for 3 times and release the
power switch.
3. Wait until LED indicator blink purple light slowly.
4. Device is now successfully entered into setup mode.
Configure Device
1. Launch Smart Switch Application.
2. If you have created account with our application before, login in with your
account. Otherwise, create new account.
* Password is only used for security of communication between Smart Plug
and your phone application.
3. Open device set up page by swipe left side of screen to right side and
select “+” button.
4. Create new profile for your device. Profile name and WiFi network
information is required.
5. After creating profile, select a device you want to configure. After device
selection, you can change the device name as you like, and select “SETUP”
button to finish the configuration. If you are not able to see the device from
the list, please try to set your device to set up mode again.
6. If device configuration is complete, the device’s LED indicator will turn
stable red light. And the application will show main screen with added
device showing.
Application Features
Turn Switch On/Off the Smart Switch Device
- To switch on/off the Smart Switch device, long press the device in application
device list view.
Schedule to Turn On/Off Smart Switch Device
- Smart Switch application two method to add schedule to Smart Switch
device (Quick Run and Schedule).
1. Quick Run allows you to add instant schedule to device for certain
minutes and hours. When Quick Run is assigned, Smart Switch device
will instantly switch on, and turn switch off after assigned minutes/hours
later.
2. Schedule allow you to add repeated or one-time schedule to Smart
Switch device. You can set up the specific time, day, and on/off
command to control the Smart Switch device automatically.
Real-time Power Usage Monitor
- Smart Switch application displays Smart Switch device’s power consumption
such as live power usage, current, line frequency, voltage, and total usage
since it is powered on.
Power Usage Graph
- Smart Switch application displays Smart Switch device’s power consumption
with graph view. You can check the device’s past power usage by hourly,
daily, monthly with graph view.
Smart Switch Firmware Update
- When new Smart Switch device firmware is released, update firmware button
will be visible on the device view. You can select this button to download
and update new device firmware.
* When update firmware button is selected, Smart Switch device will
restart couple of times to apply new firmware.
Profile Management
- Application can manage multiple profiles. Each profile represents different or
same locations that Smart Plug is placed. When profile is deleted, all the
Smart Plug registered to the deleted profile will be removed as well. For add
new profile, please see “Configure Device”.
- Users can set a profile as “Default Profile” by long press the profile you wish
to make it as “Default Profile”. If “Default Profile” is set, Application will
always to make connection to the default profile when it is launched.
Swipe from left
screen to right to
open menu
Select “X” to remove
profile
Long press to
make profile as
default.
Adding More Smart Switch Device
- Application can manage multiple Smart Plug devices. Users can add more
devices into single profile or multiple profiles. See more detail about
registering new Smart Plug in “Configure Device” section above.
Regulatory Information
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be located or operating
in conjunction with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
Andere Handbücher für CT-SW01
1
Inhaltsverzeichnis
Andere Connectiviot Schalten Handbücher
