Conquip Goods Cage Bedienungsanleitung
User Guide
Goods Cage
3
User Guide - Goods Cage
Product Information
Overview
Conquip Goods Cage is a safe, convenient method of transporng materials to
and from high or low locaons on site. It is ed with four fully tested liing
points for crane liing, and fork pockets are included as standard for easy
manoeuvrability.
There are two standard sizes of the goods cage, either with a gas assisted ramp or
a secure gate. The ramp oers the ability to load the cage using pallet truck and
sack barrows.
Key Benets
• Variety of sizes and opons for dierent requirements, can be manufactured
to exact specicaon.
• Easy loading due to front gate, or fold down ramp on some opons.
• Safe and secure for transporng loads.
• Manufactured in the UK from quality Brish and EU steel.
• All standard Conquip Goods Cages have a minimum Working Load Limit of
3000kg.
5
User Guide - Goods Cage
Product Information
Specication
Item Product Code
Goods Cage 3277 CA118AL-03277
Short End Ramped Goods Cage 3277 CA124AK-03277
Long End Ramped Goods Cage 3277 CA124AL-03277
Product Code Height Width Length Weight WLL1Fork Pocket
CA118AL-03277 1280mm 1280mm 2560mm 450kg 3000kg 150 x 70mm
CA124AK-03277 1280mm 1300mm 2645mm 460kg 3000kg 150 x 70mm
CA124AL-03277 1300mm 1300mm 2560mm 500kg 3000kg 150 x 70mm
Product Code Internal Width Internal Length Internal Clear
Area Width
Internal Clear
Area Length
CA118AL-03277 1173mm 2460mm 994mm 2309mm
CA124AK-03277 1180mm 2410mm 1055mm 2276mm
CA124AL-03277 1130mm 2460mm 994mm 2309mm
1Working Load Limit
Product Information
Specication
Item Product Code
Goods Cage 1638 CA118AL-01638
Ramped Goods Cage 1658 CA124AL-01658
Product Code Height Width Length Weight WLL1Fork Pocket
CA118AL-01638 1280mm 1280mm 1280mm 270kg 3000kg 150 x 70mm
CA124AL-01658 1300mm 1300mm 1360mm 300kg 3000kg 150 x 70mm
Product Code Internal Width Internal Length Internal Clear
Area Width
Internal Clear
Area Length
CA118AL-01638 1180mm 1176mm 1055mm 956mm
CA124AL-01658 1180mm 1130mm 1055mm 956mm
1Working Load Limit
7
User Guide - Goods Cage
Product Information
Parts Diagram
Goods Cage 3277
NOTE: These parts are for this model, they may differ for previous versions. Please contact Conquip with any queries.
Item Number Part Number Descripon Quanty
1 ZZ190061 Door Brace Assembly 1
Item Number Part Number Descripon Quanty
1 ZZ190060 Spreader Beam Assembly 1
2 ZZ990009 6mm Linch Pin 2
3 ZZ960042 Gas Strut 1500N 14 x 200mm 2
4 NS800425 M10 x 100 Hex Head Set Screw 1
5 NS800917 M10 x 80 Hex Head Set Screw 1
6 NS800013 M10 Nyloc Nut 4
7 NS800480 M10x120 Hex Head Set Screw 8.8 2
8 ZZ190067 Gas Strut Pre-tension lever assembly 1
Product Information
Parts Diagram
Goods Cage 1638
There are no replaceable parts on this opon.
Ramped Goods Cage 1658
NOTE: These parts are for this model, they may differ for previous versions. Please contact Conquip with any queries.
9
User Guide - Goods Cage
Product Information
Parts Diagram
Long End Ramped Goods Cage 3277
NOTE: These parts are for this model, they may differ for previous versions. Please contact Conquip with any queries.
Item Number Part Number Descripon Quanty
1 ZZ190059 Spreader Beam Assembly 1
2 ZZ990009 6mm Linch Pin 2
3 ZZ960042 Gas Strut 1500N 14 x 200mm 4
4 NS800425 M10 x 120 Hex Head Set Screw 4
5 NS800917 M10 x 80 Hex Head Set Screw 2
6 NS800013 M10 Nyloc Nut 8
7 NS800480 M10x120 Hex Head Set Screw 8.8 4
8 ZZ190067 Gas Strut Pre-tension lever assembly 2
Product Information
Parts Diagram
Short End Ramped Goods Cage 3277
NOTE: These parts are for this model, they may differ for previous versions. Please contact Conquip with any queries.
Item Number Part Number Descripon Quanty
1 ZZ190060 Spreader Beam Assembly 1
2 ZZ990009 6mm Linch Pin 2
3 ZZ960042 Gas Strut 1500N 14 x 200mm 2
4 NS800480 M10 x 120 Hex Head Set Screw 1
5 NS800425 M10 x 100 Hex Head Set Screw 1
6 NS800013 M10 Nyloc Nut 2
11
User Guide - Goods Cage
Original Working Instructions
Safety Instructions
Basic Safety
A site-specic Risk Assessment, and li plan where applicable, must be completed by the responsible person
before using this equipment to control risks, produce a safe system of work and ensure safety for you, your
colleagues and others. Your risk assessment will determine the correct Personal Protecve Equipment (PPE)
for the task you are doing. You must use it. Conquip recommends that you should wear:
• Suitable clothing
• Gloves
• Hard hat
• Protecve footwear (steel toecaps)
• Safety glasses
Important Safety Notes
• Read these instrucons before using this equipment. If there is anything you do not understand
or if you have any concerns do not use this equipment. Contact your supervisor or Conquip
Engineering Group for advice.
• You must check that you have considered all the safety requirements for the task you are doing
and that this equipment is suitable.
• You must protect bystanders and the general public by prevenng access to the working area.
• Do not use this equipment if you are red, unwell or under the inuence of alcohol or drugs. If
you are taking any medicine or undergoing treatment you should inform your supervisor.
Original Working Instructions
Usage Instructions
Important Usage Notes
• Do not unevenly load the Goods Cage.
• The Goods Cage must only be lied by the designated four liing points or
the integral fork pockets.
• Make sure the new locaon is safe for personnel access before moving the
load.
Using with a Crane
1. Load the cage using the access door or fold down ramp for access.
2. Secure the load if there is room for movement within the cage.
3. Once the supervisor is happy that the load is secure, balanced, and does not
exceed maximum loading weights, aach a suitable rated chain sling to the
four liing points at each of the corners of the cage.
4. Check that personnel are clear from the immediate area and the future
locaon to allow for swing of the cage when liing o the ground.
5. Crane or fork li to locaon and lower onto a rm, stable, at surface.
6. Unload the materials, using the door or ramp.
13
User Guide - Goods Cage
Disclaimer
Warranty
The products supplied by Conquip Engineering Group are all guaranteed by a 12 month warranty.
Apart from where excepons apply, Conquip Engineering Group promises to repair or replace any fault which
the Company considers to be due to defecve material or workmanship within 12 months of the date of sale,
at no addional cost.
• Faults arising from unauthorised alteraons (see modicaons secon below for full details).
• Damage caused by abuse, neglect, misuse or falling.
• Damage caused because of failure to follow transportaon, storage, loading, cleaning or
operang instrucons.
• Replacement or repair of components due to fair wear and tear.
• Any consequenal damage or wear arising from the use or ng of addional or non-standard
parts.
Modicaons
If any third-party modicaons or alteraons, involving drilling, welding, cung or distoron of materials in
any form, are to be carried out on the product, Conquip Engineering Group must provide full wrien approval
prior to the work being carried out.
Alteraons, modicaons, addions or repairs must be carried out by Conquip Engineering Group’s
recognised distributors, if they are not carrying out the work themselves.
Conquip Engineering Group operate a connuous improvement policy and therefore reserve the right to alter
technical specicaons and user guide details at any point without noce.
Conquip Engineering Group will not cover or reimburse any transportaon and/or shipment costs to and
from their premises or their recognised agents, or any material and/or labour costs for repair, replacement or
assessment against a warranty claim.
Conquip Engineering Group and/or their directors, employees, insurers or recognised agents will not be held
liable for consequenal damages, losses or expenses relang to the inability to use the product correctly for
its purpose.
Usage & Transportaon
• Never unevenly load this equipment.
• The weight of the equipment, together with its aachments, must be added to the weight of the load
when calculang the total load that will be imposed on the liing apparatus / operang machine.
• This equipment must be used in conjuncon with the load rangs of the liing apparatus / operang
machine. (Refer to the manufacturers’ load rangs and original working instrucons).
• Make sure you know how to use this equipment and understand all aspects of its operaon in case of
emergency.
• This equipment weighs more than 25kg. Do not li or manhandle without machine assistance.
• Do not operate this equipment near overhead power lines.
• Take care in conned spaces, near ceilings or similar hazards. This equipment was designed for vercal
liing. Do not drag, or swing.
• Before operang this equipment, check that you have enough space for you to work safely and make
sure that the working area is clear of hazards, obstrucons and personnel.
• Before lowering equipment make sure that the landing zone is clear and capable of accepng the size
and weight of the load.
• Crush Risk. Keep hands and feet clear of the equipment at all mes to avoid injury.
• Do not exceed the maximum Working Load Limit (WLL) shown on the serial plate. Ensure that the WLL
on the individual li points is not exceeded.
• Before liing, check that the load is secured, balanced and stable. Allow space for the equipment to
move if the load shis.
• Manoeuvre loaded or raised equipment carefully. Travel and turn slowly to avoid unit becoming
unstable.
Personnel
• All personnel must wear relevant personal protective equipment.
• Do not wear loose clothing or jewellery and tie back long hair to avoid becoming tangled or trapped in
this equipment. You must make everyone in the work area aware of what you are doing.
• All personnel involved in the lifting operation must be competent to do so and must have been briefed
in conjunction with this User Guide available from Conquip Engineering Group, the manufacturer.
Equipment Maintenance & Cleaning
• It is mandatory that the equipment is thoroughly examined regularly, by a qualied engineer, to ensure
compliance with relevant regulaon/s. (Conquip recommend to carry out thorough examinaon every
six months).
• This product may incorporate various loose and detachable items of liing gear. Refer to the separate
requirements for the safe use of those items.
• When not being used, store the unit in a clean, upright condion and in a safe place where it will be
protected from thieves and unauthorised users.
• This equipment must be inspected by the responsible person before each use and then regularly, as
determined by your risk assessment or working pracce. If you have any concerns about condion or
suitability do not use.
15
User Guide - Goods Cage
EC Declaration of Conformity
In accordance with EN ISO 17050-1:2004
Declaraon: As dened by the Machinery Direcve 2006/42/EC and subsequent amendments
We, CONQUIP ENGINEERING GROUP, herewith declare that the following indicated equipment meets
the fundamental health and safety requirements concerning the EU guide line(s), due to their design and
manufacture.
This declaraon will be rendered null and void if the machine is changed without our approval.
Signed: Dated: 2019
Garry Critchley, Managing Director
Product
Code(s):
CA118AL-01638 / CA118AL-03277 / CA124AL-01658 /
CA124AK-03277 / CA124AL-03277
EC Direcve/
Regulaon:
2006/42/EC,
Liing Operaons and Liing Equipment Regulaons 1998
Provision and Use of Work Equipment Regulaons 1998
Harmonised
Standards:
BS EN ISO 12100:2010
BS EN 13155
General
Descripon/
Designaon:
Goods Cage 1638 - CA118AL-01638
Goods Cage 3277 - CA118AL-03277
Ramped Goods Cage 1658 - CA124AL-01658
Short End Ramped Goods Cage 3277 - CA124AK-03277
Long End Ramped Goods Cage 3277- CA124AL-03277
WLL: CA118AL-01638 / CA118AL-03277 / CA124AL-01658 /
CA124AK-03277 / CA124AL-03277 = 3000kg
Important Notes
• This User Guide is for this Conquip product only.
• Any movements of the product must be thoroughly planned before the work commences to idenfy
potenal hazards and assess risk.
• All personnel involved in liing and transportaon of this product must have read this User Guide and
must be properly briefed.
• You must be competent, alert and medically t when using this equipment. If you have a medical
condion, a mental or physical disability, you must seek advice from a medical professional before using
this equipment.
Talking to us is easy
We’re here to help
Call us on 0845 520 1101
Email us at sales@cqegroup.com
www.cqegroup.com
Conquip Engineering Group
Waterbrook Estate, Alton, Hampshire, GU34 2UD
Copyright © 2019 Conquip Engineering Group. All Rights Reserved.
Goods Cage User Guide - Issue 3
Inhaltsverzeichnis
Andere Conquip Hebesystem Handbücher
Beliebte Hebesystem Handbücher anderer Marken
morse
morse 82H-124 Bedienungsanleitung
Braun
Braun NL955 Series Bedienungsanleitung
haacon
haacon 1889.10 Bedienungsanleitung
Protekt
Protekt AT 252 Bedienungsanleitung
R. Beck Maschinenbau
R. Beck Maschinenbau HS 600 Bedienungsanleitung
Nova Technology International, LLC
Nova Technology International, LLC NAS Series Bedienungsanleitung
Genie
Genie Z-60/34 Bedienungsanleitung
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Bedienungsanleitung
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Bedienungsanleitung
Custom Equipment
Custom Equipment Hy-Brid 3 Series Programmierhandbuch
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Programmierhandbuch
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Programmierhandbuch
