Contec AI-1616L-LPE Bedienungsanleitung

Ver.1.06

AI-1616L-LPE 1

High-precision Analog input board

(Low Profile size) for PCI Express

AI-1616L-LPE

*Specifications, colors and design of the products are subject

to change without notice.

This product is a multi-function, PCI Express bus-compliant

interface board that incorporates high-precision 16-bit analog

inputs, digital inputs/ outputs (LVTTL level each 4ch), and a

counter (32-bit, 1ch) function.

This product supports a Low Profile size slot and, if replaced

with the supplied bracket, supports a standard size slot, too.

You can use the driver library (API-PAC(W32)) supplied with the

board to write Windows application programs in any

programming language (such as Visual Basic, Visual C++, etc.)

that supports the calling of Win32 API functions.

It can also collect data easily without a program when the data

logger software [C-LOGGER] stored on the bundled disk is

used.

With plug-ins for the dedicated libraries, the board also supports

MATLAB and LabVIEW.

Multi-function

High-precision analog I/O can be implemented in a compact

system. This product contains the analog input (16bit, 16ch).

This product include digital inputs and outputs (4 each, LVTTL

level) and a counter (32-bit 1ch).

Analog I/O can be synchronized with an internal timer or

external clock

Analog I/O can both be performed at fixed time intervals or

synchronized with an external signal.

Buffer memory available for background processing

independent of software

The boards include buffer memory (1K Word each for analog

input and output) which can be used in either FIFO or ring

format. This allows analog I/O to be performed independently

of the operating state of the PC or software.

Software-based calibration function

Calibration of analog input/output can be all performed by

software. Apart from the adjustment information prepared

before shipment, additional adjustment information can be

stored according to the use environment.

Filter function for easy connection of external signals

The digital input signals, counter input signals, and the

external control signals for analog I/O incorporate a digital filter

to prevent problems such as chattering.

Support for both of Low Profile and standard size slots

(interchangeable with a bundled bracket).

Supported to the data logger software [C-LOGGER]

(Analog input only)

Supporting the data logger software [C-LOGGER] that enables

the graph display of recorded signal data, file saving, and

dynamic transfer to the spreadsheet software program “Excel”.

Plug-ins for the dedicated libraries, the board also

supports MATLAB and LabVIEW.

We offer a dedicated library [ML-DAQ], which allows you to

use this product on MATLAB by The MathWorks as well as

another dedicated library [VI-DAQ], which allows you to use

the product on LabVIEW.

These dedicated libraries are available, free of charge

(downloadable), on our web site.

Features

PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de

Ver.1.06

AI-1616L-LPE 2

Item

AI-1616L-LPE

Analog input

Isolated specification

Non-isolated

Input type

Single-Ended Input

Number of input

channels

16ch

Input range

Bipolar ±10V

Absolute max. input

voltage

±20V

Input impedance

1MΩor more

Resolution

16bit

Non-Linearity error *1 *2

±5LSB

Conversion speed

10µsec/ch*3 [100KSPS]*4

Buffer memory

1k Word

Conversion start trigger

Software / external trigger

Conversion stop trigger

Number of sampling times / external trigger/software

External start signal

LVTTL level (Rising or falling edge can be selected by

software) Digital filter (1µsec can be selected by

software)

External stop signal

LVTTL level (Rising or falling edge can be selected by

software) Digital filter (1µsec can be selected by

software)

External clock signal

LVTTL level (Rising or falling edge can be selected by

software) Digital filter (1µsec can be selected by

software)

Digital I/O

Number of input channels

Non-isolated input 4ch (TTL level positive logic)

Number of output

channels

Non-isolated output 4ch (TTL level positive logic)

Counter

Number of channels

1ch

Counting system

Up count

Max. count

FFFFFFFFh (Binary data,32bit)

Number of external inputs

2 LVTTL level (Gate/Up)/ch Gate (High level),

Up (Rising edge)

Number of external

outputs

1 LVTTL level, Count match output

(positive logic, pulse output)

Response frequency

10MHz (Max.)

Common section

I/O address

64 ports

Interruption level

Errors and various factors, One interrupt request line as

INTA

Used Connector

10250-52A2JL[3M] or equivalent to it

Power consumption

3.3VDC 400mA,12VDC 120mA

Operating condition

0 - 50°C, 10 - 90%RH (No condensation)

Bus specification

PCI Express Base Specification Rev. 1.0a x1

External dimension (mm)

121.69 (L) x 67.90 (H)

Weight

60g

Standard

VCCI Class A, CE Marking (EMC Directive Class A,

RoHS Directive), UKCA

*1: The non-linearity error means an error of approximately 0.1%occurs over the maximum

range at 0°C and 50°C ambient temperature.

*2: At the time of the source use of a signal which built in the high-speed operational

amplifier.

*3: The required time is indicated in the analog to digital translation of one channel. When

AD of two or more channels is converted, time of the a few minutes of the channel is

necessary.

Conversion time = Number of conversion channelsx10µsec

*4: SPS = Samplings Per Second. The number of data that can be converted in one

second is shown.

Product Dimensions

Windows version of analog I/O driver API-AIO(WDM)

The API-AIO(WDM) is the Windows version driver library

software that provides products in the form of Win32 API

functions (DLL). Various sample programs such as Visual

Basic and Visual C++, etc and diagnostic program *1useful for

checking operation is provided.

For more details on the supported OS, applicable language and

new information, please visit the CONTEC’s Web site.

Linux version of analog I/O driver API-AIO(LNX)

The API-AIO(LNX) is the Linux version driver software which

provides device drivers (modules) by shared library and kernel

version. Various sample programs of gcc are provided.

For more details on the supported OS, applicable language

and new information, please visit the CONTEC’s Web site.

Data Logger Software C-LOGGER

C-LOGGER is a data logger software program compatible with

our analog I/O products. This program enables the graph

display of recorded signal data, zoom observation, file saving,

and dynamic transfer to the spreadsheet software “Excel”. No

troublesome programming is required.

For more details on the supported OS, applicable language

and new information, please visit the CONTEC’s Web site.

Data Acquisition library for MATLAB ML-DAQ

This is the library software which allows you to use our analog

I/O device products on MATLAB by the MathWorks. Each

function is offered in accordance with the interface which is

integrated in MATLAB’s Data Acquisition Toolbox.

For more details on the supported OS, applicable language and

new information, please visit the CONTEC’s Web site.

Data acquisition VI library for LabVIEW VI-DAQ

This is a VI library to use in National Instruments LabVIEW.

VI-DAQ is created with a function form similar to that of

LabVIEW's Data Acquisition VI, allowing you to use various

devices without complicated settings.

For more details on the library and download of VI-DAQ, please

visit the CONTEC’s Web site.

[mm]

121.69(L)

67.90(H)

The standard outside

dimension(L) is the distance

from the end of the board

to the outer surface of

the slot cover.

Support Software

Specification

PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de

Ver.1.06

AI-1616L-LPE 3

Shield Cable with Two 50-Pin Mini-Ribbon Connector

:PCB50PS-0.5P (0.5m) , :PCB50PS-1.5P (1.5m)

Shield Cable with One 50-Pin Mini-Ribbon Connector

:PCA50PS-0.5P (0.5m) , :PCA50PS-1.5P (1.5m)

Screw Terminal Unit(M3 terminal block, 50 points)

:EPD-50A *1

Buffer Amplifier Box for Analog Input Boards (8ch type)

:ATBA-8L *1*2*3*4

Buffer Amplifier Box for Analog Input Boards (16ch type)

:ATBA-16L *1*2*3

BNC Connector Screw Terminal Unit :ATP-8L *1*5

*1 PCB50PS-0.5P or PCB50PS-1.5P optional cable is required separately.

*2 Only AIO-160802L-LPE, AI-1616L-LPE can be used.

*3 An external power supply is necessary (optional AC adaptor POA200-20 prepared.)

*4 As for the AI-1616L-LPE, capable of using the analog input of up to 8ch.

*5 Capable of using the analog input of up to 8ch, and analog output of up to 2ch.

* Check the CONTEC’s Web site for more information on these options.

Board[AIO-160802L-LPE] …1

Setup Guide …1

Standard size bracket …1

Serial number label…1

Warranty Certificate…1

The on- product interface connector (CN1) is used when

connecting this product and the external devices.

* Please refer to page 3 for more information on the supported cable and accessories.

Analog Input00 - Analog Input15

Analog input signal. The numbers correspond

to channel numbers.

Analog Ground

Analog ground.

AI External Start Trigger Input

External trigger input for starting analog input

sampling.

AI External Stop Trigger Input

External trigger input for stopping analog input

sampling.

AI External Sampling Clock Input

External sampling clock input for analog input.

Digital Input00 - Digital Input03

Digital input signal.

Digital Output00 - Digital Output03

Digital output signal.

Counter Gate Control Input

Gate control input signal for counter.

Counter Up Clock Input

Count-up clock input signal for counter.

Counter Output

Counter output signal.

Digital Ground

Common digital ground for digital I/O signals,

external trigger inputs, external

sampling clock

inputs, and counter I/O signals.

Reserved

Reserved pin,

N.C.

No connection to this pin.

Do not connect any of the outputs and power outputs to the analog or

digital ground. Neither connect outputs to each other. Doing either

can result in a fault.

If analog and digital ground are shorted together, noise on the digital

signals may affect the analog signals. Accordingly, analog and digital

ground should be separated.

Leave "Reserved" pins unconnected. Connecting these pins may

cause a fault in the product.

CN1

Interface connector (CN1)

- Connector used

50-pin mini-ribbon connector

10250-52A2JL[mfd.by 3M]

- connector

10150-6000EL[mfd. by 3M]

Compatible

CAUTION

Accessories (Option)

Packing List

Cable & Connector (Option)

How to connect the connectors

Connector Pin Assignment

PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de

Ver.1.06

AI-1616L-LPE 4

Single-ended Input

The following figure shows an example of flat cable

connection.

Connect separate signal and ground wires for each analog

input channel on CN1.

Single-ended Input Connection (Flat Cable)

The following figure shows an example of shield cable

connection. Use shielded cable if the distance between the

signal source and product is long or if you want to provide

better protection from noise. For each analog input channel

on CN1, connect the core wire to the signal line and connect

the shielding to ground.

Single-ended Input Connection (Flat Cable)

*1The number of channels depends on each product. The AI-1616L-LPE has 16 channels.

If the signal source contains over 1MHz signals, the signal

may effect the cross-talk noise between channels.

If the product and the signal source receive noise or the

distance between the product and the signal source is too

long, data may not be input properly.

An input analog signal should not exceed the maximum input

voltage (relate to the product analog ground). If it exceeds

the maximum voltage, the product may be damaged.

Connect all the unused analog input channels to analog

ground.

The signal connected to an input pin may fluctuate after

switching of the multiplexer. If this occurs, shorten the cable

between the signal source and the analog input pin or insert a

high-speed amplifier as a buffer between the two to reduce the

fluctuation.

This section shows how to connect the analog output signal by

using a flat cable or a shielded cable.

The following figure shows an example of flat cable

connection.

Connect the signal source and ground to the CN1 analog

output.

Analog Output Connection (Flat Cable)

The following figure shows an example of shield cable

connection. Use shielded cable if the distance between the

signal source and product is long or if you want to provide

better protection from noise. For each analog input channel

on CN1, connect the core wire to the signal line and connect

the shielding to ground.

Analog Output Connection (Shield Cable)

*2 The number of channels depends on each product. The AI-1616L-LPE has no channel.

If the product or the connected wire receives noise, or the

distance between the product and the target is long, data may

not be outputted properly.

For analog output signal, the current capacity is ±3mA (Max.).

Check the specification of the connected device before

connecting the product.

Do not short the analog output signal to analog ground, digital

ground, and/or power line. Doing so may damage the

product.

Do not connect an analog output signal to any other analog

output, either on the product or on an external device, as this

may cause a fault on the product.

Analog Input 0..15*1

Analog Ground

BOARD CN1 Cable Signal Source

Analog Ground

Shield cable

Analog Input 0..15*1

BOARD CN1 Signal Source

CAUTION

Analog Output 0..3*2

Analog Ground

BOARD CN1 Cable Target

Analog Ground

Shield cable

Analog Output 0..3*2

BOARD CN1 Target

CAUTION

Analog Input Signal Connection

Analog Output Signal Connection

PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de

Ver.1.06

AI-1616L-LPE 5

The following sections show examples of how to connect digital

I/O signals, counter I/O signals, and other control I/O signals

(external trigger input signals, sampling clock input signals, etc.).

All the digital I/O signals and control signals are LVTTL level

signals.

Digital input connection

Digital output connection

About the counter input control signal

Counter Gate Control Input (refer to the chapter 3 Connector

Pin Assignment) acts as an input that validate or invalidate the

input of an external clock for the counter. This function

enables the control of an external clock input for the counter.

The external clock for the counter is effective when input is

"High", and invalid when input is "Low". If unconnected, it is a

pull-up in the board (card) and remains "High". Therefore the

external clock for the counter is effective when the counter gate

control input is not connected.

Do not short the output signals to analog ground, digital ground,

and/or power line. Doing so may damage the product.

Each input accepts 5V TTL signals.

Digital Input

Digital Ground

10kΩ

BOARD CN1 Cable Target

Digital Ground

BOARD CN1 Cable Target

Digital Output

IOL=8mA

CAUTION

16 single-end

Analog Inputs

4 Digital Input / 4 Digital Output

External Trigger Inputs

Counter Input / Output

PCI Express Bus

CN1

FPGA

Multiplexer

DC/DC

converter

Amplifer

A/D

Converter

Digital I/O signals, Counter signals and Control

Signals Connection

Block Diagram

PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de

Inhaltsverzeichnis

Andere Contec Computerhardware Handbücher

Contec

Contec GP-IB-PCI Bedienungsanleitung

Contec

Contec PO-32L(PC)V Bedienungsanleitung

Contec

Contec DIO-32DM-PE Bedienungsanleitung

Contec

Contec CONPROSYS nano CPSN-MCB271-S1-041 Bedienungsanleitung

Contec

Contec AD12-8(PM) Bedienungsanleitung

Contec

Contec PCI-bus Analog Input Multi-Function Board... Bedienungsanleitung

Contec

Contec AO-1608L-LPE Bedienungsanleitung

Contec

Contec AIO-121602LN-USB Bedienungsanleitung

Contec

Contec CONPROSYS CPS-PC341MB-ADSC1-9201 Bedienungsanleitung

Contec

Contec BX710 Series Bedienungsanleitung

Contec

Contec CNT24-4D(PCI) Bedienungsanleitung

Contec

Contec Flexlan PC Card FX-DS-110 Bedienungsanleitung

Contec

Contec CONPROSYS Referenzhandbuch

Contec

Contec DI-64T-PE Bedienungsanleitung

Contec

Contec COM-2(PCI) Bedienungsanleitung

Contec

Contec CNT32-4MT Bedienungsanleitung

Contec

Contec GP-IB(PCI)F, GP-IB(PCI)FL, GP-IB(LPCI)F,... Bedienungsanleitung

Contec

Contec AO-1616L-LPE Bedienungsanleitung

Contec

Contec bx200 SERIES Bedienungsanleitung

Contec

Contec CNT-3204MT-LPE Bedienungsanleitung

Contec

Contec DIO-6464T2-PCI Bedienungsanleitung

Contec

Contec GP-IB(CB)F Bedienungsanleitung

Contec

Contec DIO-32DM3-PE Bedienungsanleitung

Contec

Contec PIO-16/16L(PM) Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung