Contec CONPROSYS Series Bedienungsanleitung

Ver.1.07

CPSL-08P1EN 1

CONPROSYS Series

IO-Link Master Module (8-channel)

CPSL-08P1EN

* Specifications, color and design of the products are subject to

change without notice.

This product is an IO-Link Master module with 8 channels of IO-

Link port (Class A). It supports industrial Ethernet protocols of

differing makers and can connect to the network of PROFINET,

EtherNet/IP, Modbus TCP, CC-Link IE Field Basic, EtherCAT, and

OPC UA with the switches on the product.

8 channels of IO-Link port (Class A) allow parameters to be set

independently, and IO-Link mode and SIO mode s can be set per

port.

As this product has a web server function, the user can install the

functions through a Web browser without using a specific tool.

* The contents in this document are subject to change without

notice.

* Visit the CONTEC website to check the latest details in the

document.

* The information in the data sheets is as of September, 2020.

Features

Multi-protocol support

This product supports industrial Ethernet protocols of differing

makers, and can connect to the network of PROFINET,

EtherNet/IP, Modbus TCP, CC-Link IE Field Basic, EtherCAT, and

OPC UA with the switches on the product.

8 channels of independent IO-Link port

8 channels of IO-Link port (Class A) allow parameters to be set

independently, and IO-Link mode and SIO mode can be set per

port. In addition, digital input during IO-Link communication is

achievable since No.2 pin of IO-Link port can be used as a digital

terminal.

Easy settings through a web browser

Network settings and status check can be easily done through a

web browser on the network from your PC.

Adaptable to a temperature range between -20 and +60°C

The product is capable of operating in the temperature between -

20 and + 60°C. It can be installed in the various environments.

IP67 dust-proof and water-proof features

With its dust-proof and water-proof design to meet the IP67

rating, the product can be used in locations subject to water or

dust particles.

(*IP67 is the performance indication when the waterproof caps

specified by the CONTEC are set to all connectors.)

M12 power connector adopted

As for a power connector, M12 power connector (L-Coded) is

adopted. It supplies a large amount of power with its compact

size. This product also has a FG terminal (functional grounding)

for a power connector.

Output terminal for power supply

The power input in the power input terminal is branched and it

will be output from the power output terminal.

Since it can be used as the power for other devices, you can

connect them in the daisy-chain connection.

Equipped with LED for an operation check

The product has LED for an operation check, which helps you

visually confirm the communication status of each interface.

Installation on the wall with screws

The product can be installed on the wall with screws.

Specifications

Function specifications < 1 / 2 >

Item

Specifications

LAN

Transmission

standard

100BASE-TX

Data rate

10/100Mbps

The number of

ports

Connector

M12(D-coded, Female, 4-pin)

LED

ACT(Orange), LINK(Green)

IO-Link

Transmission

scheme

IO-Link protocol (Ver.1.0/Ver.1.1)

The number of

ports

Connector

M12(5-pin A-Coded, Female) *1

Communication

speed

COM1: 4.8kbp, COM2: 38.4kbps, COM3: 230.4kbps

Port class

Type A

Rated voltage

24VDC (typ.)

Max. load current

200mA/port *2

Isolation

specification

Non-isolated

LED

A(Orange),ST(Green/Red), B(Orange)

IO-Link

(in SIO(DI)mode)

Input type

Current source output (PNP output ) support

Rated voltage

24VDC (typ.)

Input current

5mA (typ.)

ON/OFF voltage

15VDC min. / 5VDC max. *3

IO-Link

(in SIO(DI) mode)

Output type

Push-pull output *3

Rated voltage

24VDC (typ.)

Output current

200mA/port *2

Output registance

3Ωmax.

IO-Link

(Digital inputs for

pin 2)

Input type

Current source output (PNP output ) support

Rated voltage

24VDC (typ.)

Input current

2mA (typ.)

ON/OFF voltage

15VDC min. / 5VDC max. *3

LED

ST(Green/Red)、BF/NS/ERR(Green/Red)、

SF/MS/RUN(Green/Red)、

SYS(Green, Orange)

Switch

Mode setting switch, Address setting selection

switch, Address setting switch×2, Protocol setting

switch

*1 Connector pin 5 is left unconnected.

*2 The total current of the C/Q, L+ line in all ports should be less than 1.6A.

*3 Data 0 corresponds to Low level and Data 1 corresponds to High level.

PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de

Ver.1.07

CPSL-08P1EN 2

Function specifications < 2 / 2 >

Item

Specifications

Power input *4*5

Rate input voltage

(current)

: 24VDC (1.8A),

UA: 24VDC (0.1A)

Max. input current

US: 12A, UA: 12A

Input voltage range

US: 20.4 –26.4VDC, UA: 20.4 –26.4VDC

Device current

comsumption

: 0.2A(Max.), U

: 0.1A(Max.)

Connector

M12(5-pin(4+FE) L-Coded, Male)

Power output *4

Output voltage *6

: US input voltage (Max.),

UA: UA input voltage (Max.)

Max. output current *7

US: 12A, UA: 12A

Connector

M12(5-pin(4+FE) L-Coded, Female)

Physical dimensions (mm)

69.0(W)×225.0(D)×18.0(H)

(No projection included)

Weight

600g

Protective function

IP67 *8

Installation method

Installation with screws *9

*4 Use power cable within 3meters.

*5 UA power is unavailable with this product. It is not necessary to supply power to UA when

you only use the device on its own.

*6 The voltage input to the power input terminal is output as it is, but if the current from the

output terminal is large, a voltage drop may occur due to the internal resistance.

*7 The total current from the power output current, device consumption current, and output

current to the IO-Link port should be supplied to the power supply input terminal.

*8 Do not use this product immersed in water.

*9 The commercial screws are required individually.

Installation Environment Requirements

Item

CPS-MM-LC

Operating ambient

temperature

-20 - +60°C

Operating ambient humidity

10 - 90%RH (No condensation)

Non-operating ambient

temperature

-20 - +60°C

Non-operating ambient

humidity

10 - 90%RH (No condensation)

Corrosive gases

None

Line-noise

resistance

Line noise

AC line/±2kV *10

Signal line/±1kV(IEC61000-4-4 Level 3, EN61000-4-4 Level 3)

Static

electricity

resistance

Touch/±4kV(IEC61000-4-2 Level 2, EN61000-4-2 Level 2)

Air/±8kV(IEC61000-4-2 Level 3, EN61000-4-2 Level 3)

Vibration

resistance

(The product

alone) *9

Sweep

resistance

10 - 57Hz *11 / semi-amplitude vibration 0.15mm, 57 -

150Hz/2.0G

40minutes each in X, Y, and Z directions (JIS C60068-2-6-

compliant, IEC60068-2-6-compliant)

Altitude

5000m or less

Shock resistance

(The product alone) *10

15G half-sine shock for 11ms in X, Y, and Z directions

(JIS C 60068-2-27 –compliant, IEC 60068-2-27 -compliant)

Grounding

Class D grounding (previous class 3 grounding)

Standard

VCCI ClassA, FCC ClassA,

CE Marking(EMC Directive Class A, RoHS Directive)

*10 When you use the CPS-PWD-90AW24-01 (optional power product)

*11 When you use an optional power product：10 - 55Hz (See the manual of optional power

product for details)

Physical Dimensions

Circuit Block Diagram

Component Name

No.

Name

Function

LAN Port

It is a connector for Ethernet communuication.

FE Terminal

It is a terminal for functional groudning.

(This hole is also used to secure the main body with a screw).

Status LED

Status of the product is indicated with LEDs.

Mode Setting Switch

It is a switch for boot mode setting.

(Do not perform any operations other than those described in

this manual.)

Maintenance Connector

Do not use this.

Address Setting Selection

Switch

It is a switch to select a setting method for the IP address of

the product.

Address Setting Switch

It is a switch to set an address of the product.

Protocol Setting Switch

It is a switch to select an Ethernet protocol.

IO-Link Connector

It is an IO-Link communication connector.

Screw Mounting Hole

It is a hole to fix and secure the main body with a screw.

Power Input Connector

It is a connector to supply power.

Power Output Connector

It is a connector to send power to the outside.

LAN Port

number

Signal

number

Description

TX+

Transmission data (+)

Output

2 RX+

Reception data (+)

Input

3 TX-

Transmission data (-)

Output

4 RX-

Reception data (-)

Input

- LAN Cable

Compatible Connector

M12, 4-pin D-Coded (For Ethernet), Male

Category

Category 5e or better, a shielded cable (Double shield cable

recommended)

Cable Length

Within 100 meters

PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de

Ver.1.07

CPSL-08P1EN 3

Protocol Setting Switch

Setting value

Setting contents

[Factory settings]

PROFINET

EtherNet/IP

Modbus TCP

CC-Link IE Field Basic

EtherCAT

5 - F

Do not set anything.

Address Setting Selection Switch

Setting value

Setting contents

[Factory settings]

DHCP *1

BOOTP *2

When using the product with fixed

addresses.(192.168.1.1 -192.168.1.254).

Set with the address setting switch. *1

3 - F

Do not set anything.

*1 Do not set this when setting PROFINET protocol / EtherCAT protocol.

*2 Do not set this except when setting EtherNet / IP protocol.

Address Setting Switch

Set this when using the product with fixed addresses.(192.168.1.1

-192.168.1.254). *1*2 Set an IP address when choosing [2] in

"Address Setting Selection Switch". *3 There are two switches

for setting addresses and the addresses are set in hex.

“H” and “L” represent high bits and low bits respectively.

The setting range is 01 - FEh (1 - 254).

The adderss is read when the product power is turned on. When

changing the address, change the settings first, then, reboot the

product.

- Settings for the Address Setting Switch

(EhterNet/IP, Modbus TCP, CC-Link IEF

Basic)

Setting value

Setting contents

00h

[Factory settings]

Start up with the IP address set in

CONPROSYS WEB Setting.

01 - FEh

FFh

It is a setting range for addresses.

Set to "FF" and turn on the power. This

restores IP address to the default

settings. The SYS of the LED turns green.

Check the green is on, and set back to

"00", then start up again.

[H] [L]

- Settings for the Address Setting Switch

(EtherCAT)

Setting value

Setting contents

00h

[Factory settings]

The configuration station system is used

for setup.

01 - FF

Explicit Device ID can be set in the range

of [0-255].

Always set Configuration Station Alias to

[0] when setting ID.

*1 Do not set this when the protocol setting switch is selecting PROFINET.

*2 Node ID can be set instead of IP address when the protocol setting switch is selecting

EhterCAT.

*3 Set [0] when the protocol setting switch is selecting EhterCAT.

IO-Link Connector

number

Signal

name

Description

1 L+

Power supply to the connected

device (+)

Digital input

3 L-

Power supply to the connected

device (-)

4 C/Q

IO-Link communication/Digital

I/O

N.C.

This is left unconnected

- IO-Link Cable

Compatible Connector

M12, 3 to 5-pin (in accordance with your use) A-Coded, Male

Cable

Use a cable that withstands the temperature of 75°C and higher.

Cable Length

Within 20 meters

- An example of connecting with the IO-Link device

- An example of connecting with a 3-line sensor

- An example of connecting with a 2-line sensor

- A connecting example of DO output

Power Input Connector

number

Signal

name

Description

I/O power /system power

GND_U

Ground of the auxiliary power

GND_U

Ground of I/O power/system power

4 UA

Auxiliary power

(Unavailable with this product)

FE FE

It is a terminal for functional

grounding. Connect this to earth

ground.

- Power Input Cable

Compatible Connector

M12, 5-pin(4+FE) L-Coded, Female

Cable

Use a cable that withstands the temperature of 75°C and higher.

Cable Length

Within 3 meters

Power Output Connector

number

Signal

name

Description

I/O power/system power

GND_U

Ground of the auxiliary power

GND_U

Ground of I/O power/system power

Auxiliary power

FE FE

It is a terminal for functional grouding.

It is connected to the FG termial at the

top of the device.

- Power Output Cable

Compatible Connector

M12, 5-pin(4+FE) L-Coded, Male

Cable

Use a cable that withstands the temperature of 75°C and higher.

Cable Length

Within 3 meters

PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de

Ver.1.07

CPSL-08P1EN 4

Product Configuration List

Product …1 Product Guide … 1

Warranty Certificate …1 Serial number Label …1

Waterproof cap …1

Optional Products

DIN rail fitting power supply

CPS-PWD-90AW24-01: Fitting power supply 90W

(Input: 100 - 240VAC, Output: 24VDC 3.8 A)

CPS-PWD-30AW24-01: Fitting power supply 30W

(Input: 100 - 240VAC, Output: 24VDC 1.3 A)

Unshielded cable with a connector on one end for M12

(L-Coded) connector

PCL5P-3: M12, 5-pin (4+FE) L-Coded, Female, one end, 3m

* When connecting to the optional power supply of the CONTEC, alterations need to be

undertaken to connect the M12 connector cable to the terminal.

* Visit the Contec website for the latest optional products.

PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de

Andere Handbücher für CONPROSYS Series

Dieses Handbuch passt für folgende Modelle

Andere Contec Steuereinheit Handbücher

Contec

Contec COM-4CN-USB Bedienungsanleitung

Contec

Contec AI-1608VIN-USB Bedienungsanleitung

Contec

Contec CONPROSYS Series Bedienungsanleitung

Contec

Contec RRY-16CX-USB Bedienungsanleitung

Contec

Contec F&eIT Series Bedienungsanleitung

Contec

Contec CPS-AO-1604LI Bedienungsanleitung

Contec

Contec CPSN-SSI-4C Bedienungsanleitung

Contec

Contec CNT16-8GY Bedienungsanleitung

Contec

Contec DAI12-4GY Bedienungsanleitung

Contec

Contec F&eIT Series Bedienungsanleitung

Contec

Contec ADI16-4(FIT)GY Bedienungsanleitung

Contec

Contec Conprosys CPS-MC341-ADSC1-111 Bedienungsanleitung

Contec

Contec CONPROSYS nano CPSN-CNT-3201I Bedienungsanleitung

Contec

Contec CPS-DO-16L Bedienungsanleitung

Contec

Contec CNT24-2GY Bedienungsanleitung

Contec

Contec DS540-MPCI4W Bedienungsanleitung

Contec

Contec PLUG-IN PTI-4GY Bedienungsanleitung

Contec

Contec F&eIT Series Bedienungsanleitung

Contec

Contec CONPROSYS CPS-MCS341-DS1-111 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung