Contemporary Controls CTRLink EISK5-GT/H Bedienungsanleitung

EISK5-GT/H

Skorpion Gigabit Diagnostic Switch for Protocol Debugging

Installation Guide

The EISK5-GT/H gigabit switching hub is designed as an aid in diagnosing Ethernet

communication issues and debugging software. This device has all of the features

of a normal switch except that —like a repeating hub —it passes messages

received by any port to all other ports. This allows the activity of all ports to be

monitored by a “sniffer” attached to any port —an ability that would otherwise

require the “port mirror” function of a more costly managed switch.

The five ports of the EISK5-GT/H offer features that traditional repeating hubs do

not. Each port supports Auto-MDIX —so either straight-through or crossover

cabling can be used. The collision domain is terminated at each port so there is

no cabling length limit —except that each segment cannot exceed the 100 m

specification for Ethernet. Store-and-forward operation mitigates against lost

messages. Each port automatically negotiates its data rate to 10 Mbps, 100

Mbps or 1000Mbps.

The EISK5-GT/H has five Auto-MDIX ports for attaching local devices. In

addition to a power LED, each port has LEDs showing link/activity/rate.

The EISK5-GT/H is powered from a low-voltage source and is provided with a

writeable label for easy identification of the remote device attached to each

cable.

Specifications

Electrical

INPUT DC AC

Voltage: 10–36 V 24 V ±10%

Power: 3 W 5 VA

Frequency: N/A 47–63 Hz

Class 2 Circuits Only

Environmental

Operating Temperature: 0°C to +60°C

Storage Temperature: –40°C to +85°C

Humidity, non-cond.: 10% to 95%

Protection: IP 30

Mounting TS-35 DIN-rail

Shipping Weight 1 lb (0.45 kg)

Regulatory Compliance

CE Mark; CFR 47 Part 15, Class A

UL508 Industrial Control Equipment

Functional

Compliance: ANSI/IEEE 802.3

Data Rates: 10, 100 and 1000 Mbps

Signalling: 10BASE-T, 100BASE-TX

and 1000BASE-T

Connectors: Shielded RJ-45

Segment length: 100 m (maximum)

LED Indicators

Power green

Activity/Link/Rate green or yellow

RJ-45 Connector Pin Assignments

Mechanical

Pin Function

1 BI_DA+

2 BI_DA–

3 BI_DB+

4 BI_DC+

5 BI_DC–

6 BI_DB–

7 BI_DD+

8 BI_DD–

Power Options

Power Considerations

Voltage in the specified range must deliver current commensurate with power

consumption. Recommended size for solid power conductors is 16–22 AWG; for

stranded conductors, use 16–18 AWG. COM is directly connected to zero volts and

chassis is isolated from zero volts. Input connections are reverse-polarity protected.

Network Connections

The unit employs Auto-MDIX technology so that either straight-through or crossover

cables can be used to connect to network interface adapters or to another hub.

LED Indicators

The “PWR” LED glows solid green when the switch is properly powered. To aid in

troubleshooting, each port has two LEDs. The Port 1 LED labelled “H” glows if a

link exists at 1000 Mbps (green) or at 100 Mbps (yellow). The LED labelled “L” is

normally unlit but glows yellow if a 10 Mbps link exists. Either the “H” or “L” LEDs

flash to show activity. The LEDs of Ports 2–5 are unlabeled but work the same.

Need more help installing this product?

For more information, visit www.ccontrols.com. If contacting our office, ask for

Technical Support.

Warranty

Contemporary Controls (CC) warrants this product to the original purchaser for five

years from the shipping date. If it fails to operate in compliance with its specification

during this period, CC will, at its option, repair or replace the product at no charge. The

customer is responsible for shipping the product; CC assumes no responsibility for the

product until received. This limited warranty covers products only as delivered. If user

modification damages the product, repair or replacement are not covered. Damage

from abuse, accident, disaster, misuse, or incorrect installation are not covered. This

warranty in no way warrants suitability of the product for any specific application. More

warranty information can be found at www.ccontrols.com.

Warning: This isa Class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Returning Products for Repair

Return the product to the location where it was purchased by following the instructions

at the URL below:

www.ccontrols.com/rma.htm

Declaration of Conformity

Information about the regulatory compliance of this product can befound at the URL below:

www.ccontrols.com/compliance.htm

July 2012 TD090320-0IA

Inhaltsverzeichnis

Andere Contemporary Controls Schalten Handbücher

Contemporary Controls

Contemporary Controls EISX8M series Bedienungsanleitung

Contemporary Controls

Contemporary Controls EISK8-100T/F Series Bedienungsanleitung

Contemporary Controls

Contemporary Controls EISK16-100T Bedienungsanleitung

Contemporary Controls

Contemporary Controls CTRLink Skorpion Series Bedienungsanleitung

Contemporary Controls

Contemporary Controls CTRLink EISK5-100T Bedienungsanleitung

Contemporary Controls

Contemporary Controls CTRLink EISK8-GT/H Bedienungsanleitung

Contemporary Controls

Contemporary Controls CTRLink EISX9-100T Bedienungsanleitung

Contemporary Controls

Contemporary Controls CTRLink EISK8P-GT Bedienungsanleitung

Contemporary Controls

Contemporary Controls EISW Series Bedienungsanleitung

Contemporary Controls

Contemporary Controls CTRLink EISK8M Series Bedienungsanleitung

Contemporary Controls

Contemporary Controls EISK5-100T/F Series Bedienungsanleitung

Contemporary Controls

Contemporary Controls EISW5-100T Bedienungsanleitung

Contemporary Controls

Contemporary Controls CTRLink EISK8-100T Bedienungsanleitung

Contemporary Controls

Contemporary Controls CTRLink EIDX MP Series Bedienungsanleitung

Contemporary Controls

Contemporary Controls EISK5-100T/H Bedienungsanleitung

Contemporary Controls

Contemporary Controls CTRLink EISC-100T Bedienungsanleitung

Contemporary Controls

Contemporary Controls CTRLink EIBA5-100T Bedienungsanleitung

Contemporary Controls

Contemporary Controls EISW8-100T Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung