CONTINENTAL EDISON CECP551FSA Bedienungsanleitung

CECP551FSA

Manuel d’instructions de la

PLAQUE DE CUISSON INDUCTION

Cooking Hob

Cooking Zones  INDUCTION

Supply Voltage 220-240V 50/60 Hz

400 V 50/60 Hz

Installed Electric Power

(W) 5500

Product Size

D×W×H(mm) 590×520×55

560×490

Building-in Dimensions

A×B (mm)

Induction Hotplate

Appearance

CECP551FSA

Product Introduction

The induction hotplate can meet various demands of cuisine by

electromagnetic heating, with micro-computerized control and multifunction,

really the optimal choice for modern families.

The induction hotplate centers on customers and adopts personalized design,

and which will make your life comfortable and enabling to fully enjoy the

pleasure of life.

We have designed this hob for private use in home.

Working Principle

The induction hotplate is mainly composed of an induced heating coil, hotplate

made of ferromagnetic materials and control system.

In principle, current generates a powerful magnetic field via the coil. Large

numbers of vortexes are produced in the way that the magnetic lines in the

field contact the bottom containing iron or stainless steel substances. The

tremendous energy generated by the vortexes can heat the food directly by

converting efficiency heat energy penetrating through the bottom.

Figure (1)

Dear customer:

Thank you for purchasing the the induction hotplate our product can

serve you many years to your satisfaction.

Please read this instructions manual carefully before using and

installation, keep it cautiously after reading for future reference.

Thank you for your purchase of the induction hotplate again, and wish

you to enjoy the pleasure by it.

Over- Temperature Protection

A temperature sensor equipped can monitor the temperature inside the

hotplate. When an excessive temperature is monitored, the induction hotplate

will stop operation automatically.

Pot Detection

When an unsuitable size or non-magnetic pot (e.g. Aluminum), or some other

small item (e.g. knife, fork, key) has been left on the hob, or the pot has been

removed, the hob can stop heating immediately. If there is no suitable pan put

on the right hob in one minute, the hob will go automatically into the standby

state, and the buzzer will sound for warning at one time.

Heat Indication

When the hotplate is used for a long time, waste heat remains in the heating

zone in a few minutes. The code “H” appears, warning to be away from the

heating zone.

Protection of Shutting Down Automatic

Shutting down Automatic is a safety protection function for your induction

hotplate. It will shut down automatically if you forget to turn off your cooker.

The default working times for various power levels are shown in the

following table:

Power level The heating zone shut down automatically

after

1~3 8 hours

4~6 4 hours

7~9 2 hours

*Remind:

The patient with a heart pacemaker shall use this product under the guidance

of the doctor.

Selection of installation equipment

Drill holes on the table surface according to the sizes shown in the drawing.

For the purpose of installation and use, a minimum of 50 mm space shall be

preserved around the hole.

Be sure the thickness of the table surface is at least 30mm. Please select

heat-resistant table material to avoid larger deformation caused by the heat

radiation from the hotplate.

As shown in Figure (2)

Figure (2)

Under any circumstances, make sure the induction hotplate is well ventilated

and the air inlet and outlet are not blocked.

Ensure the induction hotplate is in good work state.

As shown in Figure (3)

Figure (3)

5 cm mini

5cm mini 5cm mini

56 cm

Air intake

mini 5 cm

mini 760mm

mini 2 cm

Air exit

mini 5 mm

Note: The safety distance between the hotplate and the cupboard above the

hotplate should be at least 760mm.

Fix the hob on the table by screw four brackets on the bottom of hob (as

shown in figure (4)) after installation. Adjust the bracket position to suit for

different table top thickness.

Figure (4)

Cautions:

1. The induction hotplate must be installed by qualified personnel or

technicians. We have professionals at your service. Please never conduct

the operation by yourself.

ELECTRICAL CONNECTION

"The installation must conform to the standard directives."

The manufacturer declines all responsibility for any damage that may be

caused by unsuitable or unreasonable use.

2. The induction hotplate shall be installed such that better heat radiation can

be ensured to enhance its reliability.

3. The wall and induced heating zone above the table surface shall withstand

heat.

4. To avoid any damage, the sandwich layer and adhesive must be resistant to

heat.

Warning

• Always check before any electrical operation, the supply tension shown on

the electricity meter, the adjustment of the circuit breaker, the continuity of the

connection to earth to the installation and that the fuse is suitable.

• The electrical connection to the installation should be made via a socket with

a plug with earth, or via an Omni-pole cut-out switch with an opening gap of at

least 3 mm.

If the appliance has a socket outlet, it must be installed so that the socket

outlet is accessible.

• The yellow/green wire of the power supply cable must be connected to the

earth of both power supply and appliance terminals.

• The manufacturer cannot be held responsible for any accidents resulting

from the use of an appliance which is not connected to earth, or with faulty

earth connection continuity.

• Any queries regarding the power supply cord should be referred to After

Sales Service or a qualified technician.

• I f the cable is damaged or to be replaced, the operation must be carried out

the by sale agent with dedicated tools to avoid any accident.

Power line connection

The socket shall be connected according to the relevant standard or

connected to a single-pole breaker.

The method of connection is shown in Figure (5):

Figure (5)

blue

green-yellow

N2 N1 L2 L1

grey

brown

black

220-240V

blue

green-yellow

N L2 L1

grey

brown

black

400V

220-240V

blue

green-yellow

N L

grey

brown

black

220-240V

connet to the main power supply connet to the main power supply connet to the main power supply

220-240V 2+2N~ 220-240V~

400V~ 2-N

If the cable is damaged or needed to be replaced, the operation must be

carried out by the after-sale agent with dedicated tools to avoid any accidents.

If the appliance is being connected directly to the mains an Omni-polar

circuit-breaker must be installed with a minimum opening of 3mm between

contacts.

The installer must ensure that the correct electrical connection has been made

and that it is compliant with safety regulations.

The cable must not be bent or compressed.

The cable must be checked regularly and replaced by authorized technicians

only.

Induction Hotplate Appearance

Figure (6)

Air entry

Air vent

Ceramic plate

Control panel

Schematic Diagram of The Control Panel

Figure (7)

Instructions For Use

Timer Regulating key

On/OFF

Lock Power Regulating key

Preparation Before Using:

After power on, the buzzer beep once, all the indicators light up for 1 second and

then go out, which indicates the induction hotplate enters the state of standby.

Put the pot in the center of the heating zone.

Operation Instructions:

When the “ON / OFF” button is pressed, all the indicators show "-" .

According to the heating zone where the pot is placed, press the "+" or "-"

button, select a relevant zone ,the indicator displays 5, then adjust the power

levels using the "+" or "-" button.

AND

Or press the "+" and "-" buttons simultaneously, the power setting immediately

chang to 0, and all the cooking zone switch off.

See the attached table “the max. power of each heating zone” for the power

specific to each heating zone.

Note: 1. After the “ON/OFF” button is pressed, the induction hotplate will

restore to its standby state if no any operation is carried out within one minute.

Timing function

Select the relevant cooking zone, and set the power level with the “+” or “-”

button. (e.g. the cooking zone 3 with power level 6)

Press the "+"or"-""of timing button, the timing indicator flashes, and you can

set the timer at this point.

Using the “+” or “-“of timing buttons, you can realize the setting of timing from

1 to 99 minutes.

OR AND

When the “+”of timing button is pressed, the time setting will increase by 1 minute;

And it will increase by 10 minutes when the “+”of timing button is long pressed.

When the “-”of timing button is pressed, the time setting will decrease by 1 minute;

And it will decrease by 10 minutes when the “-”of timing button is long pressed.

Timing confirmation:

After selecting a set time, once the timing indicator flashes for 5 seconds, the set

time will be confirmed to be valid automatically.

Timing cancellation:

If press the "+" and "-" simultaneously, the timing can be cancelled automatically,

with the timing indicator showing “0”.

AND

Inhaltsverzeichnis

Andere CONTINENTAL EDISON Kochfeld Handbücher

CONTINENTAL EDISON

CONTINENTAL EDISON CECP701FSA Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CECTG4VW1 Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CETI4ZFLEXB1 Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CECTG4BD Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CECP533RP Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CETI2ZFLEX4B Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CETI3BFLEX Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CECP1000RP Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON B100037 Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CECTG4GFVB Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CETI4Z4BFLEX Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CETI4Z2BV2 Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CETI4Z4B Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CEICT2 Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON INPULS3Z Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CETI3Z3B3T Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CECP104RP2 Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CETI3B3T2 Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CECP502RP Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CECP104RP Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CECP503RP Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON INPULS4Z Series Bedienungsanleitung

CONTINENTAL EDISON

CONTINENTAL EDISON CECP102RP Bedienungsanleitung

Beliebte Kochfeld Handbücher anderer Marken

Siemens

Siemens EX875KYV1E Technisches Datenblatt

AEG

AEG CERAMIC HOB 6010 K Bedienungsanleitung

VALERA

VALERA CT 70A Bedienungsanleitung

Zanussi

Zanussi ZGF 6420 Bedienungsanleitung

Gaggenau

Gaggenau CI 273 Bedienungsanleitung

G3 Ferrari

G3 Ferrari Energy Bedienungsanleitung

Pkm

Pkm IN4B Bedienungsanleitung

Award

Award H903BG Bedienungsanleitung

Zanussi

Zanussi VCH 5005 RZ Bedienungsanleitung

Miele

Miele KM 523 Bedienungsanleitung

Hotpoint

Hotpoint IS67V8CCXT/E Bedienungsanleitung

AEG

AEG HK854870XB Bedienungsanleitung

Cookology

Cookology SEP600BK Bedienungsanleitung

Bauknecht

Bauknecht Hob Bedienungsanleitung

Zanussi

Zanussi ZGM 782 Bedienungsanleitung

dipo INDUCTION

dipo INDUCTION DIBK218S Bedienungsanleitung

Miele

Miele KM 5987 Bedienungsanleitung

Miele

Miele KM 360 G Bedienungsanleitung