11 12
Condition 2: "TARE" function
When total sum of all loads on scale
＞4% of scale's max.weight capacity.
(4%=80g when capacity is 2000g;
200g when capacity is 5000g)
Under this condition:
By pressing ZERO, you can see the
total weight of all loads on the scale.
If you want to weigh more loads,
just press ZERO to reset LCD
reading to '0' again.
"ZERO" OR "TARE" FUNCTION
To weigh different loads consecutively without removing loads from the scale.
Put first Load on the scale, get weight reading. Press ZERO button to reset the
LCD reading to "0" before adding next load. You can repeat this operation.
Condition 1: "ZERO" function
When total sum of all loads on scale
≤4% of scale's max.weight capacity.
(4%=80g when capacity is 2000g;
200g when capacity is 5000g)
g
Weight Milk Water
ZERO
ZERO
g
Weight Milk Water
g
Weight Milk Water
g
Weight Milk Water
g
Weight Milk Water
g
Weight Milk Water
g
Weight Milk Water
LCD will show “-----” or “0g” each time ZERO
is perssed. “-----” means not stable, please
wait for a moment. “0g” and meanwhile an
icon “o” on lower left corner of LCD mean
“ZERO” function is active. Max.weight capacity
remains unchanged.
LCD will show “-----” or “0g” each time ZERO
is pressed. “-----” means not stable, please
wait for a moment. “0g” and meanwhile an
icon “TARE” on upper left corner of LCD
mean “TARE” function is active. Max. Weight
capacity is reduced by total weight of all loads.
2. Volume indication mode
A. Place the scale on a solid and flat
surface.
B. Press "ON/OFF" to turn on the
scale.
C. Wait until LCD shows "0", and
press MODE button to choose
"Water" or "Milk" mode.
D. Put a liquid container onto the
scale platform.
E. Press ZERO button to reset LCD
to "0".
F. Pour liquid (water or milk) into the
container, LCD shows the volume
of the liquid.
G. Press MODE button to choose
"Weight" mode and view the weight
of liquid.
