Contura C 820T Bedienungsanleitung

Installation

Instructions

C 820T

www.contura.eu

Manufacturer’s assurance

The stove is approved by the Swedish National Testing and Research Institute, SP SITAC and fulfils

the applicable rules for CE marking. Manufacture of the product has taken place in accordance with

those documents that are the basis for the relevant type approval certification and the required

manufacturing checks.

378 001

Contura 820T is a Swan marked wood burning stove.

NIBE was the first stove manufacturer in Sweden to commit to Swan marking stoves. The Swan mark

is one aspect of our vision to be a company of the future, setting high quality standards regarding

the environment. Certification number 378-001.

CERTIFICATE

www.contura.eu

EC Declaration of

conformity

MANUFACTURER

Name NIBE AB/Contura

Address Box 134, Skulptörvägen 10, SE-285 23 Markaryd

Place of manufacture Markaryd, Sweden

PRODUCT

Product type Stove fired by solid fuel

Type designation Contura

Standard EN 13240 annex ZA

Intended for use Heating of living accommodation

Fuels Wood logs

Special conditions None

CE-MARKING 820

Issued 2010

Nominal output 5 kW

Fuel type Wood logs

Flue gas temperature 261° C

Energy efficiency 82%

Emission of CO 0,07%

Appendix

Lighting and installation instructions

Niklas Gunnarsson

Business area manager NIBE STOVES

Table of contents

Technical details 52

Prior to installation 52

Connection to chimney 53

Supply of combustion air/Option 54

Installation distances 55

Assembly 56

Removing the loose parts 59

A warm welcome to Contura.

A warm welcome to the Contura family. We hope

you will get a great deal of pleasure from your new

stove. As a new owner of a Contura stove you have

secured a product with timeless design and long

service life. Contura also has combustion that is both

environmentally friendly and efficient for the best heat

production.

Read through these installation instructions carefully

before installation. Read how to best light your stove

in the lighting instructions.

The stove becomes very hot

During operation, certain surfaces of the stove become

very hot and can cause burn injury if touched. Be aware of

the strong heat radiated through the hatch glass. Placing

flammable material closer than the safe distance indicated

may cause a fire. Pyre lighting can cause quick gas ignition

with the risk of damage to property and personal injury.

NOTE! WARNING!

Report the installation of a stove to your

local authority.

The owner of the house is personally responsible

for ensuring compliance with the mandatory safety

requirements and must have the installation approved by

a qualified inspector. Your local chimney sweep must also

be informed about the installation as this will affect the

routines for regular chimney-sweeping services.

CONTENTS

52 FACTS

Nominal output 5 kW

Efficiency up to -%

Model 820T

Height (mm) 930

Width (mm) 460

Depth (mm) 360

Weight (kg) 125

Type approved in accordance with:

European standard EN-13240

Swedish approval

Norwegian standard NS 3059

German standard DIN Plus

Contura 820T

Prior to installation

If the insert needs to be put down

to be moved or if the pillar foot is

to be installed, remove any loose

components. This is described at the

end of these installation instructions.

1 Fire bars

2 Grate disc

3 Fire bricks

Installation by authorised

technician

This manual contains instructions about

how the stoves must be assembled and

installed. To ensure the function and safety

of the stove, we recommend that the

installation is carried out by an authorised

technician. Contact one of our dealers who

can recommend suitable technicians.

Building application

These main instructions may give guidance

which would contravene national building

regulations. Please refer to supplementary

instructions or ask your local authority for

advice regarding building regulations.

Before installing a stove or erecting a

chimney it is necessary for you to make

a building application permission to your

local authority.

Structural support

Check that the wood joists are strong

enough to bear the weight of the stove and

chimney. The stove and chimney can usually

be placed on a normal wooden joist in a

single occupancy house if the total weight

does not exceed 400 kg.

Hearth plate

Due to the risk of falling embers, a

flammable floor must be protected by a

hearth plate. It must extend 300 mm in

front of the stove and 100 mm on each side

of the stove, or have a 200 mm extension

on each side of the opening. The hearth

plate can consist of natural stone, concrete,

metal plate or glass. A painted metal

or glass hearth plate is available as an

accessory for these models.

Important to remember!Technical details

CHIMNEY

Connection to chimney

ca 180 mm

Rear connection to a masonry chimney

Top connection to the chimney

Make sure that the connector

gasket does not work loose when

the connection pipe is placed

on the connector. If further

sealing material is required, heat-

resistant sealant may be used.

The back panel must be installed before the stove is rear connected.

The hot air grille must be installed before chimney top

connection.

• The stove meets the requirements for connecting to chimneys

dimensioned for 350°C flue gas temperature.

• The external diameter of the connection sleeve is 150 mm.

• The stove requires a draft in the chimney of at least –12 Pa. The

draft is affected both by the length and area of the chimney, and

by how well sealed it is. Minimum recommended chimney length

is 3.5 m and suitable cross section area is 150-200 cm² (140-160

mm in diameter).

• A flue with sharp bends and horizontal routing reduces the

draught in the chimney. Maximum horizontal flue is 1 m, on the

condition that the vertical flue length is at least 5 m.

• It must be possible to sweep the full length of the flue and the

soot hatches must be easily accessible.

• Carefully check that the chimney is sealed and that there is no

leakage around soot hatches and flue connections.

2 31

5 64

In the bag with these installation instructions

are two wing screws for the cover.

54 SUPPLY AIR/ACCESSORY

Supply of combustion air

When a stove is installed in a room, the demand for air supply to

the room increases. Air can be provided indirectly via a vent in

the outer wall or via a duct from the outside that is connected to

the connector on the underneath of the stove. The amount of air

needed for combustion is 20m3/h.

The connector has an external diameter of 67 mm. When duct

routing further than 1 m the pipe diameter must be increased to

100 mm and a correspondingly larger wall vent must be selected.

In hot areas the duct should be insulated with 30 mm mineral wool

covered with a moisture inhibitor (plastic). It is important that the

lead-in between the pipe and the wall (or floor) is sealed using

jointing compound.

A 1 m length of condensation insulated ducting for combustion air

is available as an accessory.

Through the external wall.

Indirect air supply through the external wall.

Through floor and foundation slab.

Through floor and wall-and-cavity

foundation.

C820T

In the back and floor plates there are

knockouts that must be removed to insert

the pipe.

Installation variants

Leave a 40 mm gap between

the condensation insulation

and the bottom of the stove.

40 mm

INSTALLATION DISTANCES

C820T

* If the stove is placed on a hearth plate made of glass for example (accessory), the height from the floor is affected by a distance corresponding to the thickness of the hearth plate. Also applies to

separate glass hearth plates (accessory).

** To prevent discolouration of painted non-flammable walls we recommend that the same side distance as to combustible walls is used.

The minimum distance in front of

the stove opening to combustible

parts of the building or interior

decoration must be at least 1 m.

The dimension diagrams only

show the minimum permitted

installation distances for the

stove. When connecting to a steel

flue, also note the safety distance

requirements of the flue. The

safety distance between an un-

insulated flue and a combustible

part of the building should be at

least 450 mm.

Installation distances

WHEN INSTALLING TURNTABLE (OPTION) the

following installation distances do not apply.

See the separate turntable installation instruc-

tions.

A = height from floor to chimney

connection upwards

B = height from floor to c/c chimney

connection rear

C = height from floor to air inlet

D = height from floor to lower edge

of hatch

Permitted

area for

combustible

material

A separate glass hearth

plate (accessory)

increases the connection

height to the chimney by

6 mm.

D 335

460

930

2000*

100

Combustible roof

360

180

A 877*

115

B 785*

C 300

100

Ø150

Air inlet Ø67

580

350

100

200

300

100

200

300

280

100

Combustible wall

278

506

Combustible wall

280**

700

1000

230

50**

Fire-retardant wall of

brick or concrete

278

506

Fire-retardant wall of

brick or concrete

56 ASSEMBLY

Installing C820T

3 4

1 2

Final inspection of the installation

It is extremely important that the installation is inspected by an authorised chimney sweep before

the stove is used. Also read the ”Lighting instructions”, before lighting for the first time.

VANADI UM

No. 7

CHROME

ASSEMBLY

Inhaltsverzeichnis

Andere Contura Kamin im Innenbereich Handbücher

Contura

Contura C i4 Bedienungsanleitung

Contura

Contura C 586 Bedienungsanleitung

Contura

Contura C 590T Bedienungsanleitung

Contura

Contura C 26T Low Bedienungsanleitung

Contura

Contura Surround C 11 Bedienungsanleitung

Contura

Contura 596T Bedienungsanleitung

Contura

Contura C 590T Bedienungsanleitung

Contura

Contura C 470 Bedienungsanleitung

Contura

Contura C 35T-Lag Bedienungsanleitung

Contura

Contura NIBE i50 Bedienungsanleitung

Contura

Contura Turntable C500 Bedienungsanleitung

Contura

Contura C i50 Bedienungsanleitung

Contura

Contura C 620S Bedienungsanleitung

Contura

Contura C 460 Bedienungsanleitung

Contura

Contura Ci4 FS Powerstone Classic Bedienungsanleitung

Contura

Contura C26K High Bedienungsanleitung

Contura

Contura C 556 Bedienungsanleitung

Contura

Contura C i41 Bedienungsanleitung

Contura

Contura C i40 Bedienungsanleitung

Contura

Contura Ci51 Bedienungsanleitung

Contura

Contura C i5 Bedienungsanleitung

Contura

Contura Ci61 Bedienungsanleitung

Contura

Contura C i6 Bedienungsanleitung

Contura

Contura C 550A Bedienungsanleitung

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Enviro

Enviro E33GI Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Miles Industries

Miles Industries Vogue 1300IRN Handbuch