Coolmax CU-500B Bedienungsanleitung

Model: CU-500B

1. Function Description

This power supply is designed for personal computer. There are seven DC outputs:

+3.3V, +5V, +12V1, +12V2, +12V3, -12V & +5VSB, and it provides power to all

computer systems and peripherals with maximum protection.

Here are some of the key features:

Full Range Input Voltage (OPTIONAL)

Active Power Factor Correction(OPTIONAL)

Surge Current Protection

Input Transient Voltage Protection

Over Voltage Protection

Over Load Protection

Short Circuit Protection

Low noise design ***

Compare with the conventional power supply which hires 80mm fan

assembled at the side of chassis, the power supply is assembled with a 120mm

fan horizontally located at the top chassis, with bigger fan blade, and just right

assembly location, it cools down the heating components more effectively, and

much low noise also gained.

2. How to Setup

It is rather simple to install this power supply to your precious computer tower.

Follow the steps below to finish the setup.

Step1: Open the computer tower cover; put the power supply into the

corresponding location of the tower, and then use right screws

to fix the power supply to tower.

Step2: Put the Main Power Connector, ATX12V Connector, Peripheral

Connectors, Floppy Connectors, PCI-Express Connector and many

others (when available) to the corresponding male sockets such as

main-board, peripheral devices (i.e. HDD, CDROM etc.) and floppy

drivers respectively. When you connect connectors, please pay

attention to the orientation of them because of the different hole sizes. Find

the proper orientation and push down firmly making sure that

the pins are aligned.

3. Specifications

3.1 Input Requirements

The power supply shall operate as below:

115V(100Vmin.-120Vmax.),

230V (200Vmin.-240Vmax.). 50Hz-60Hz.

3.2 DC Output

Power distribution configuration:

Model CU-500B

DC O/P Load Max. 500W

+3.3V 21A

+5V 22A

+12V1 17A

+12V2 17A

+12V3 12A

-12V 0.5A

+5VSB 2.5A

3.3 Protection

The power supply itself is designed with short circuit, over voltage and over load

protection functions described as below:

3.3.1 Short Circuit Protection

A short circuit on any DC output will cause the power to latch. The power

supply will withstand a continuous short circuit to the output without damage or

overseers to the unit. The +5VSB can be shorted indefinitely and will recover

automatically when the short is removed.

3.3.2 No Load Operation

No hazardous conditions or damage to the supply will occur with all of the DC output

connectors disconnected from the load.

3.3.3 Over Load Protection

When the total load exceed 130%~160% of the maximum output current, the

power supply shall be latched into the state of shutdown.

3.4 Physical Environment

Operation Conditions

The power supply shall be capable of continuous operation and meet all

electrical specification without need for adjustment when subjected to the

following environmental conditions:

Temp. Vs Load Condition Humidity

0 ~30°C@Full Load

Operation 40°C@90%Rated Load 10%~90%RH

50°C@80%Rated Load

Storage -20°C ~80°C 5%~90%RH

No degradation of the power supply shall occur during shipping or storage at the

specified condition.

3.5 Regulatory Compliance

Our power supply has been certified to comply with multi-national Safety and EMI. -- UL,

CUL, CSA, TUV, FCC

4. Precaution

Caution: Unauthorized personnel should not do this to avoid electrical shock!

4.1 Do not open the top cover of the power supply case.

4.2 Please keep the power supply from humidity.

5. Simple Maintenance

If power supply cannot work properly, before send for repair, please check the

following items:

5.1 Does power cord indeed plug into electrical outlet?

5.2 Does Input Voltage set in power supply correspond to the main source in

your environment?

5.3 Please check the output connectors plugging in proper direction and connecting firmly.

5.4 Please turn off the power and turn it on for several times, and the interval must

be at least 5 seconds.

5.5 Having checked above items, if the power supply still does not function, please

send it back to your retailer or distributor for repair.

Inhaltsverzeichnis

Andere Coolmax Stromversorgung Handbücher

Coolmax

Coolmax CUG-600B Bedienungsanleitung

Coolmax

Coolmax CUQ-1200B Bedienungsanleitung

Coolmax

Coolmax CF-350B Bedienungsanleitung

Coolmax

Coolmax CU-700B Bedienungsanleitung

Coolmax

Coolmax CUL-750B Bedienungsanleitung

Coolmax

Coolmax CA-300 Bedienungsanleitung

Coolmax

Coolmax CP-500T Bedienungsanleitung

Coolmax

Coolmax RM Series Bedienungsanleitung

Coolmax

Coolmax V-600 Bedienungsanleitung

Coolmax

Coolmax CX-400B Bedienungsanleitung

Coolmax

Coolmax M-500B Bedienungsanleitung

Coolmax

Coolmax RM-750B Bedienungsanleitung

Coolmax

Coolmax CM-300 Bedienungsanleitung

Coolmax

Coolmax V-500 Bedienungsanleitung

Coolmax

Coolmax CTI-500B Bedienungsanleitung

Coolmax

Coolmax CTG-750 Bedienungsanleitung

Coolmax

Coolmax CUG-700B Bedienungsanleitung

Coolmax

Coolmax CW-650T Bedienungsanleitung

Coolmax

Coolmax CUG-950B Bedienungsanleitung

Coolmax

Coolmax NW-450B Bedienungsanleitung

Coolmax

Coolmax ZP-380B Bedienungsanleitung

Coolmax

Coolmax CU-400B Bedienungsanleitung

Coolmax

Coolmax CA-300 Bedienungsanleitung

Coolmax

Coolmax V-600 Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung